Calibration Technician

2 weeks ago

Doha, Qatar TALEB GROUP Full time

Taleb Group in Doha, Qatar is now hiring for **Calibration Technician** positions.

**Requirements**:

- Minimum 2 years in calibration division

**Salary**:Negotiable based on his qualifications and experience.

**Responsibility**:

- To receive the instruments for calibration from the customers.
- To check the physical condition of instruments as well as functioning of instrument.
- To verify the qty. and type of instruments received against customer delivery note / memo, if any.
- To prepare Calibration Service Request cum Instrument Receipt Challan
- To issue copy of Calibration service request cum instrument receipt challan to the customer for acknowledgement of receipt of their instruments.
- To paste masking tape on instrument along with the details of; Calibration service request (inward) No. (Job No.) / Serial no. of particular instrument in the inward.
- To place the instruments at the identified area such as “Instrument received for Calibration”.
- To clean the instruments before calibration.
- To clean the instruments with petrol and cotton waste in case of mechanical instruments.
- To keep instrument in the calibration standard room at least for 30 minutes for soaking (To bring instrument in the equilibrium condition of the standard room).
- To start calibration of instruments as per the documented calibration method based on the priority of the calibration.
- To ensure that the calibration methods are available where calibration activities are performed.
- To record the results of calibration in the observation sheet.
- To complete the calibration and to get review and approval of results recorded in the observation sheet from the Technical Manager.
- To calculate uncertainty of measurement for the instruments calibrated as requested by the customer.
- To enter the data of the observation sheet in the computer and prepare calibration certificate.
- To get review and approval of the calibration certificate through Technical Manager / Chief Executive Officer.
- To collect photocopies of masters calibration certificate used for the performing of calibration.
- To attach photocopies of calibration certificates of master along with the calibration certificates and to place all such things in the cover.
- To place instrument at the identified place in the calibration room after completion of calibration.
- To deliver the instruments alongwith the calibration certificate to the customer.
- To ensure that the proper records are maintained at all stages of calibration and quality assurance activities.
- To prepare daily records of the mechanical / electrical / thermal discipline.
- To handle the instruments throughout the calibration activities in safe and proper manner.

**Application**:
**Education**:

- Diploma (preferred)

**Experience**:

- Calibration Technician: 2 years (preferred)

  • Calibration Technician

    4 days ago

    Doha, Qatar TALEB GROUP Full time

    Taleb Group in Doha, Qatar is now hiring for **Calibration Technician** positions. **Requirements**: **Responsibility**: - To receive the instruments for calibration from the customers. - To check the physical condition of instruments as well as the functioning of instruments. - To verify the qty. and type of instruments received against customer delivery...

  • Calibration Technician

    2 weeks ago

    Doha, Qatar TALEB GROUP Full time

    Taleb Group in Doha, Qatar is now hiring for **Calibration Technician** positions. **Requirements**: - experience in the calibration field minimum 3 years ( Oven - Weight balance - weighing Bridge - Length - Batching plant RM Load cells - Feller Guage - Diploma in Metrology or any relevant qualifications **Salary**:QAR 1800-2000 based on his qualification...

  • Calibration Lead/manager

    2 weeks ago

    Doha, Qatar Walco Middle East Full time

    Calibration Lead/Manager have the following duties and responsibilities: - Set up a new Calibration Facility - Develop and implement calibration procedures and techniques - Use precision measurement devices to calibrate, inspect, and test equipment to ensure that it meets specifications - ISO Standards 17025 - Identify and rectify problems associated with...

  • Calibration Lab Technician

    1 week ago

    Doha, Qatar PS Tech Full time

    Doha, Qatar **Qualification: - ** An engineering Degree preferably in Instrumentation, Mechatronics, or electronics **Experience: - ** - A minimum of 7 years of experience in an accredited calibration laboratory to the standard ISO 17025. - The accredited scope of the laboratory should cover the parameters Force, Pressure, Temperature, Dimensional,...

  • Calibration Lab Manager

    1 week ago

    Doha, Qatar PS Tech Full time

    Doha, Qatar **Qualification: - ** An engineering Degree preferably in Instrumentation, Mechatronics, or electronics **Experience: - ** - A minimum of 7 years of experience in an accredited calibration laboratory to the standard ISO 17025. - The accredited scope of the laboratory should cover the parameters Force, Pressure, Temperature, Dimensional,...

  • Jr. Technician

    3 days ago

    Doha, Qatar Privately-Held Company Full time

    **_Description: _** - Calibration of Pressure Gauges - Calibration of Vernier Calipers - Calibration of Thermometers ect in ISO/IEC 17025:2017 environment **Requirements**: - Diploma in Electrical or instrumentation - 0-1 years experience (Freshers may also apply) - MS Word MS Excel is a must **Job Types**: Full-time, Permanent

  • Service Technician, Bms

    1 week ago

    Doha, Qatar Johnson Controls Full time

    **What you will do**: The Technician is a key role reporting directly to the Operations Team Leader, Aftermarket Controls Segment. The Aftermarket Controls team carry out service, maintenance and retrofit projects on Building Management Systems (BMS) used for comfort and energy efficiency across multiple industries including commercial, retail and...

  • Instrument Technician

    7 hours ago

    Doha, , Qatar Swan Global WLL Full time $40,000 - $100,000 per year

    Role Overview: The Instrument Technician will install, calibrate, troubleshoot, and maintain field instrumentation and control systems for oil & gas/construction projects.Key Responsibilities:Install, test, and calibrate field instruments (pressure, flow, temperature, level).Perform loop checking, troubleshooting, and repair of control systems.Assist in...

  • Instrumentation Technician

    6 hours ago

    Doha, Qatar Swan Global Full time

    Job Title: Instrumentation Technician - Offshore Shutdown Project Location: Qatar (North Field, Ras Laffan, Halul Island) Project Type: Oil & Gas Shutdown/Turnaround Employment: Contract (3-6 months, extendable) Rotation: 6 weeks ON / 6 weeks OFF Job Description: The Instrumentation Technician is responsible for installing, calibrating, troubleshooting, and...

  • Crane Technician

    6 days ago

    Doha, Qatar ASMACS QATAR Full time

    Crane Technician **Qualifications** 1. Locally based in Doha for immediate joining with QID and NOC 2. ITI (Mechanical / Automobile Engineering) 3. 3 years experience in troubleshooting and calibrations in All terrain/Rough terrain/Truck mounted cranes as Heavy Fleet Technician Electrician Pay: From QAR1,000.00 per month