Control Engineer

1 week ago

Doha, Qatar Qatar Energy LNG Full time

Job SpecificationJob Purpose Facilitate the maintenance and administration of all control systems, safety systems and field instruments deployed at QatarEnergy LNG onshore facilities. Financial Dimension As defined for this job level in the Delegation of Authority and/or approved budget. Qatarization Program Contribute to the development of Qatari employees. This accountability is a condition of employment for expatriate employees. Key Job Accountabilities Execute PM/CM activities for ICSS, facilitate major complex I&C activities, and provide engineering support to the field instrumentation team in compliance to maintenance procedures, safety and quality requirements. Support control systems Quality Assurance/Quality Control verification and execute instrumentation QA/QC verification during maintenance PM/CM activities as applicable. Provide day-to-day support to operations, supporting in Alarm Management, shutdown gate meetings, Risk Based Work Selection (RBWS) meeting, asset monthly meetings, and management of issue register. Handle the activities within Management of Change (MOC) process, such as implementation concurrence, system updates, and reviewing the facility impact. Provide input to the RCM team to improve system maintenance strategies, supporting in Root Cause Failure Analysis (RCFA), risk screening, Formal Risk Assessment (FRA). Review availability and requirements of spares and raise Stock Amendment Request (SAR) as per requirements. Key Job Accountabilities Participate in the Factory Acceptance Tests (FAT) and Site Acceptance Test (SAT) of new I&C systems, to ensure that the new technology is transferred and accepted into the Company. Support the commissioning of control systems, prior to plant start up, work in shift for shutdown and start up support requirements. Support tie-in of new projects to existing facility and handover from projects or shutdown. Support in the management and continuous update of I&C systems maintenance policies and procedures, deliver trainings and contribute to strategic initiatives within the division, as applicable. Perform Emergency Shut Down (ESD) tests as per the established test procedure for the department. Person Specification - Minimum RequirementQualifications Bachelor's degree in engineering or science majoring in instrument & controls, computer science or electronics. Knowledge and/or Experience 4 years Instrumentation and Control experience in oil and gas or petrochemical. Knowledge of DCS, PLC's, TMR, ESD systems and third-party System Interface with DCS. Basic knowledge of SAP system Knowledge of control valve maintenance, safety instrument systems (SIS) maintenance, turbine instrumentation, various field instruments like DPT, RTD, thermowell, RADAR LT etc. Intermediate knowledge of SAP systems. Technical and Business Skills - I Computer literacy of advanced level in Microsoft Office and database applications. Competent in procedures development. Strong training, competency assurance and coaching/mentoring skills Competence in accordance with technical competency framework requirements.

  • Control Engineer

    6 days ago

    Doha, Qatar Qatar Energy LNG Full time

    Job SpecificationJob Purpose Maintain and administer Integrated Control Systems (ICS) deployed at the QatarEnergy LNG onshore facilities. Job Context & Major Challenge(s) Operates in technical environment with interface with multiple stakeholders. Maintains relevant international standards, industry best practices and have good exposure to latest trends in...

  • Control Engineer

    2 days ago

    Doha, Baladīyat ad Dawḩah, Qatar Qatar Energy LNG Full time 80,000 - 150,000 per year

    Provide support to the maintenance of the control systems through system monitoring, health checks, troubleshooting and analysis. Perform system activities such as backup of application, databases, and special files required for rebuilding the system.Perform day-to-day troubleshooting including Level-2 complexity Issues, routine preventive...

  • Instrumentation and Control Engineer

    1 week ago

    Doha, Qatar MATRIX INCORPORTATED CONTRACTING CO. W.L.L Full time

    **Instrumentation & Control Engineer** - Bachelor’s Degree in Instrumentation and Control Engineering or other Relevant discipline - Minimum 8 Years' Experience as in a Design Consultancy - Broad experience in Oil, Gas, Brownfield and Greenfield facilities, preferably with EPCM contractors - Develop detailed design review of various instrumentation and...

  • Control System Engineer

    2 weeks ago

    Doha, Qatar ASMACS QATAR Full time

    ** CONTROL SYSTEM SENIOR ENGINEER** **Qualifications** - locally based in Doha for immediate joining with **QID**/**NOC/Qatar drivers license**: - **10 years** in control system Engineer with **6 yrs. Supervisory** **(Control System Maintenance/ Troubleshoot/optimization); proficiency in** **HYSYS, PIPENET, PIPEPHASE, FLARENET for process simulation and...

  • Instrumentation & Control Engineer

    8 hours ago

    Doha, Baladīyat ad Dawḩah, Qatar Mekdam Technical Services Full time 120,000 - 180,000 per year

    Engineering degree in Instrumentation.Minimum 10 years experience in instrumentation and control engineering in the Oil and Gas Sector or similar with at least 3 years related to QA/QC activities. Very good written and spoken English.High computer literacy in both office and technical / engineering applications.Strong knowledge on QA/QC requirements and...

  • Instrumentation & Control Engineer

    1 week ago

    Doha, Qatar Matrix incorporated contracting company Full time

    We are hiring Instrumentation & Control Engineer - **Experience** - Min 6-8 years experience **Having Design and Engineering experience prominently in Oil & Gas field.** **Job Description**: - Develop detailed design review of various instrumentation and automation engineering deliverables(instrument datasheet, instrument list and I/O list, instrument...

  • Quality Control Engineer

    2 days ago

    Doha, Baladīyat ad Dawḩah, Qatar Qatar Building Engineering Company Full time 12,000 - 180,000 per year

    Company DescriptionQatar Building Engineering Company is a 100% Qatari owned contracting firm established in 1984 by H.E Sheikh Mohamed Faisal Thani Jassim Al Thani. As one of the largest local contracting companies in Qatar, the firm employs over 5,000 professionals. They specialize in constructing tower buildings, shopping centers, warehouses, power...

  • Cost Control Engineer

    5 days ago

    Doha, Qatar MATRIX INCORPORTATED CONTRACTING CO. W.L.L Full time

    We are hiring Cost Control Engineer - Degree in Engineering with specialization in Project Management or Cost Control related training. - 6+ years of experience in a similar environment within the Construction industry. - Experience in Cost estimation & Projects control Must be on freevisa with valid QID 10 hrs duty/6 days location: Old airport Duration:...

  • Cost Control Engineer

    2 weeks ago

    Doha, Qatar Lanco Engineering & Contracting WLL Full time

    _**Cost Control Engineer**_ - **Duration : 3 months, extendable**_ - **Location: Mesaieed, Qatar.**_ - Bachelor’s degree in Engineering, Construction Management, or a related field. - Minimum 5 years of experience in cost control or financial management within the construction industry. - Strong analytical skills with the ability to interpret financial...

  • Control Engineer

    2 days ago

    Doha, Baladīyat ad Dawḩah, Qatar QatarEnergy LNG Full time $80,000 - $100,000 per year

    Job description:Job SpecificationJob PurposeFacilitate the maintenance and administration of all control systems, safety systems and field instruments deployed at QatarEnergy LNG onshore facilities.Financial DimensionAs defined for this job level in the Delegation of Authority and/or approved budget.Qatarization ProgramContribute to the development of Qatari...