Welding Engineer

4 days ago

Al Daayen, Qatar Orion Engineering Services Limited Full time

We have a current opportunity for a Welding Engineer - Offshore on a contract basis. The position will be based in Doha. residential role. For further information about this position please apply.ActivitiesTo promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities.To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices.To treat all information obtained during course of the work with confidentiality.To write Welding Project Particular specificationsIn case of LLI purchased by Company, to write the technical RFQ for Material and Welding Scope of WorkTo review and validate the Welding matrices, Welding Procedure Specifications, Welding Procedure Qualification Records, Welding Book, Production Tests, Heat Treatment process.To participate in the different Contractors and Critical Vendors Kick Of Meetings and Pre-Inspection Meetings.To be involved in the Surveillance and Inspection activities.Witness welding qualifications, welders qualification and test laboratory, as required.To assess performance of dedicated personnel for welding.To review and validate the Non Destructive Testing Procedures and method statement guidelines.To review / approve Welding and Material documentation using EDMSTo promote Quality in the Projects and provide Quality and Technical advices.To participate in the resolutions of the Technical Queries, Deviations Requests, NCRs and Concessions Requests.To lead investigations of significant Quality failures.To lead or participate on qualification/assessment/technical audits over Suppliers (LLI), Contractors, and Vendors.To provide weekly & monthly status reports including KPI’s to Head Projects QA/QC on welding engineering, metallurgy, and non-destructive testing.To participate in the Project Close Out.To issue any lesson learnt, Quality Feed Back Notice or Feedbacks affecting Welding, Metallurgy and Non Destructive Testing.  RequirementQualification: Master’s degree in welding - ESSA / IWE / EWE certifications also required.Professional Experience (number of years) : 15 in a similar position.Experience within project : (number of years) : 10 years of experience associated with topsides fabrication and subsea pipelines laying, including automatic welding process.Confident in ECA and associated testingComprehensive knowledge in welding, material, corrosion (inc SSCC) and NDE.Good leadership skills and good communication skills.Ability to work on projects in a complex and multicultural environment,Be skilled in using computer programs for word processing, database management, spreadsheets and e-mail communications.H2S OPITO and T-BOSIET trainings Our role in supporting diversity and inclusion As an international workforce business, we are committed to sourcing personnel that reflects the diversity and values of our client base but also that of Orion Group. We welcome the wide range of experiences and viewpoints that potential workers bring to our business and our clients, including those based on nationality, gender, culture, educational and professional backgrounds, race, ethnicity, sexual orientation, gender identity and expression, disability, and age differences, job classification and religion. In our inclusive workplace, regardless of your employment status as staff or contract, everyone is assured the right of equitable, fair and respectful treatment.

  • Welding Engineer

    4 days ago

    Al Sheehaniya, Qatar Orion Group Full time

    We have a current opportunity for a Welding Engineer - Offshore on a contract basis. The position will be based in Doha. residential role. For further information about this position please apply.ActivitiesTo promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities.To carry out work in compliance with COMPANY...

  • Structural Welding Supervisor

    2 days ago

    Al Sheehaniya, Qatar Nakilat Full time

    Functionally Reports To: Construction Superintendent**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES** Primary FunctionsTo co-ordinate and supervise the activities of the foremen and his crew on the project.Must ensure compliance with HSE, Quality and Ethics policy and attached roles and responsibilitiesTasks and ResponsibilitiesTo set and apply standards of...

  • QA/qc Engineer

    1 week ago

    Al-Khawr, Qatar GETC GROUP Full time

    Develospfunctional automation scripts for regression testing and performance testingProvide construction welding engineering supportsIn conjunction with the Construction QA / QC Manager, develop welding inspection strategy to ensure the welding clearance meets the project schedule needsQuality check on inward construction materialInitiate and supervise...

  • Senior QA/QC Engineer

    1 week ago

    Al Khor and Al Thakhira, Qatar Qatar Energy LNG Full time

    Job Purpose Ensures that the quality of engineering, design, procurement, construction, installation of new equipment and repair, modifications of onshore and offshore facilities is consistent with the Codes, Standards, Specifications and Company Policies and Procedures. Key Job Accountabilities - I Supervise the activities of QA/QC Inspectors, Contract...

  • Senior QA/QC Engineer

    2 days ago

    Ras Laffan, Al Khor and Al Thakhira, Qatar QatarEnergy LNG Full time 120,000 - 240,000 per year

    Job description:Job PurposeEnsures that the quality of engineering, design, procurement, construction, installation of new equipment and repair, modifications of onshore and offshore facilities is consistent with the Codes, Standards, Specifications and Company Policies and Procedures.Key Job AccountabilitiesSupervise the activities of QA/QC Inspectors,...

  • Cad/cam Engineer

    1 week ago

    Al-Wakrah, Qatar Saif Qatar Duct fab Full time

    Saif Qatar Duct Fab (QATAR) We are looking for an experienced CAD Drafter/Designer/ (Solidworks or Inventor) that can put together shop drawings, coordinate with engineers, project managers, team members, and fabricators to make sure project-specific items are clear and concise.and then entering that information into either Solidworks or Inventor and then...

  • Material & Fabrication Qc Inspector (Metal & Stainless Steel)

    5 days ago

    Al-Wukayr, Qatar TARGET METAL INDUSTRIES Full time

    **Job Summary**: We are seeking a **Material & Fabrication QC Inspector** to join our QA/QC Department, responsible for ensuring all **metal and stainless steel fabrication** activities meet the required quality standards, project specifications, and inspection procedures. **Key Responsibilities**: - Inspect incoming raw materials (steel, stainless steel,...

  • QC Inspector

    2 days ago

    Ras Laffan, Al Khor and Al Thakhira, Qatar Madre Integrated Engineering Full time 90,000 - 120,000 per year

    ResponsibilitiesConduct visual inspection of weld joints, fit-up, alignment, root pass, and final weld.Monitor welding activities in accordance with approved WPS , PQR , and WPQ .Inspect materials, consumables, and welding equipment for compliance with project requirements.Validate welder identification, continuity logs, and ensure qualified welders...

  • Fabricator

    8 hours ago

    Doha, Al Wakrah, , Qatar Madre Integrated Engineering Full time $50,000 - $100,000 per year

    ResponsibilitiesCarry out fabrication, fitting, and assembly of structural steel, piping, and supports.Perform gas cutting, grinding, and shaping of materials as per drawings and work instructions.Read and interpret engineering drawings, isometrics, and fabrication sketches.Ensure proper edge preparation and fit -up for welding activities.Follow safe working...

  • Dimensional Control Engineer

    8 hours ago

    Ras Laffan, Al Khor and Al Thakhira, Qatar Qatar Shipyard Technology Solutions Full time 90,000 - 120,000 per year

    Job Summary and PurposeSupervise, Oversee and manage dimensional control survey activities to ensure all structural assemblies and piping spools meet specified dimensions and tolerances. Provide assurance that dimensional surveys are carried out on fabricated structures and piping spools, including all fabrication marine interfaces.AccountabilitiesDevelop,...