Maintenance Engineer
1 month ago
Reports To: Shipyard Facility & Maintenance Manager (SFMM) Direct Reports: Supervisor, Technicians
Job Summary and Purpose
The Maintenance Engineer (AI) is responsible for monitoring of Assets in line with Asset Integrity Management System Procedure. This includes integrity of plant, facility, utility, mobility, civil & marine infrastructures in the NKOM yard and for the continual review and improvement of Asset Management Plans (AMP's). Monitoring of all works shall be in line with industry best practice and in full compliance with company HSSEQ requirements.
Accountabilities
Key Accountabilities: 1) Responsible to implement Asset Integrity policies and procedure for all NKOM yard equipment's. 2) Responsible to conduct IIR/RCA report for all the Incidents/ Accidents / Damages / Breakdowns etc., 3) Responsible to perform the Inspection, Condition Monitoring, Data Review and Analysis. 4) Provide monthly Asset Integrity status reports. 5) Identify the root causes for the Asset Integrity deterioration. 6) Conduct Asset Integrity, Risk assessment, Risk Reduction for critical assets. 7) Suggest improvements and coordinate for management approvals. 8) Review the yard equipment's maintenance works, maintenance reports and perform the gap analysis to improve the maintenance regime, maintenance plan (Predictive Maintenance (PDM), Proactive Maintenance(PROM), Plan Preventive Maintenance (PPM), Condition Based maintenance(CBM) for the equipment's. 9) Assist and advise Head of Maintenance in the preparation of maintenance strategies to reduce failure rates of equipment and improve maintenance KPI. 10) Prepare IIR/RCA reports and provide to Head of Plant and Maintenance with proposals for corrective action & preventive action (CAPA) and Lessons learned action (LLA) to recurrence of failures and ensuring lessons learned. 11) To provide technical support to optimize the for PM&S SAP plan for PM, CM, BDM, REFM, Turn Around and shutdown maintenance. 12) To provide technical support to optimize PM&S (OPEX, CPEX) Maintenance Cost. 13) Provide suggestion for best maintenance practices, methods, technologies and coordinate their implementation for enhancing the integrity at an optimum cost. 14) Coordinate with relevant Authority and obtain approvals of MOC for any changes to systems and structures. 15) Communicate upwards for Training needs, Process Improvement Suggestions and follow up on implementation. 16) Demonstrate work behaviors consistent with company values and work within company policies, standards, procedures, and any legislative requirements. 17) Adhere to health, safety, security and environmental policies, procedures, instructions, and controls for the safety of self and others. 18) Ensure compliance to quality management procedures and controls to deliver high quality services and products. 19) Follow all the safety procedures and report lapses, if any. 20) Perform any other assigned duties and responsibilities.
Accountabilities - 2
Accountabilities - 3
Accountabilities - 4
Competencies
Achievement Oriented Collaboration & Teamwork Customer Centricity Drive Vision Empower & Nurture Talent Interactive Communication Solution Oriented
Key Result Areas
. System availability for operational effectiveness. . Equipment - Reliability, Availability, Maintainability, MTTR, MTBF. . Optimize cost for Plant, maintenance, and services. . MOC for Improvements. . Safety-zero harm.
Interactions and Working Relations
Internal: All P&M Staff, Operations Sections in N-KOM, HSSEQ Sections. Purpose: To complete assigned jobs for departments as dispatched per operational need. External: Asset Integrity Management Consultants, CBM Consultants and External Services/Specialist Contractors Purpose: To acquire knowledge and skills from Asset Integrity Management (AIM) Consultants, CBM Consultants and Specialists in implementation of AIM and CBM best practices
Financial Authorities
As per TOFA
Qualifications, Experience and Job Skills
Qualifications: . 4 Years of Engineering Degree in Electrical / Mechanical. Experience: . 10 years of relevant experience as Electrical, Mechanical Maintenance Engineer, or equivalent. . Knowledge of fault finding and troubleshooting techniques. . Knowledge of Condition Monitoring and CBM for Plant, Machinery, Hydraulic systems, HVAC, Mechanical, Electrical, I&C Systems and Civil & Structural Systems . Ability to read engineering drawings and schematics. . Knowledge of electro-mechanical repair and maintenance. . Knowledge of Risk Assessment Procedure, Work Instruction, PTW System and LOTO System . Computer knowledge (of Microsoft Office/Word, Excel, Power point for preparation and presentation 1D, 1W, 1M, 1Y, Reports)
Job Specific Competencies: i. Behavioral Competencies . Drive Vision . Interactive Communication . Customer Centricity . Solution Oriented . Empower & Nurture Talents . Collaboration & Teamwork . Achievement Oriented ii. Technical Competencies . Commitment of NKOM Core Values. . Verbal Written and Communication Skills. . Computer literacy (Microsoft Office/Excel/Power Point) . Coaching and Mentoring Skills. . Project Management Skills. . Knowledge of Shipyard Operations. . Time Management Skills. . Analytical Thinking Skills. . Budgeting/Business planning Skills. . Presentation Skills. . Problem solving Skills. . Creativity. . Read and comprehend Engineering Drawings and schematics. . Read and comprehend equipment manuals and international standards. . Understand Control Systems. . Ability to write technical reports. . Ability to learn requirements and needs of new systems.
-
Maintenance Planner- Mechanical
1 week ago
Ras Laffan City, Qatar KBR Full timeTitle:Maintenance Planner- Mechanical3-years diploma in relevant discipline of responsibility. i.e., Mechanical Diploma Engineering for Mechanical Planning, Electrical diploma Engineering for Electrical Planning and Instrument/Electronics diploma Engineering for Instrument and Automation planning.Seven (7) Years of continuous experience in job planning...
-
Maintenance Planner- Electrical
24 hours ago
Ras Laffan City, Qatar KBR Full timeTitle:Maintenance Planner- Electrical3-years diploma in relevant discipline of responsibility. i.e., Mechanical Diploma Engineering for Mechanical Planning, Electrical diploma Engineering for Electrical Planning and Instrument/Electronics diploma Engineering for Instrument and Automation planning.Seven (7) Years of continuous experience in job planning...
-
Maintenance Planner- Mechanical
1 week ago
Ras Laffan City, Qatar KBR Full timeTitle:Maintenance Planner- Mechanical3-years diploma in relevant discipline of responsibility. i.e., Mechanical Diploma Engineering for Mechanical Planning, Electrical diploma Engineering for Electrical Planning and Instrument/Electronics diploma Engineering for Instrument and Automation planning.Seven (7) Years of continuous experience in job planning...
-
Maintenance Engineer
4 weeks ago
Qatar CANDIDZONE- Qatar JobsSaudi Jobs Oman JobsMiddle East Jobs Full timeJob Description: Maintenance Engineer We are hiring a Maintenance Engineer for one of our clients in Doha. Candidates who have the required qualifications and experience may apply. Requirements: Minimum 5 years of experience in PMV and construction company. Bachelor's degree in mechanical engineering or mechanical engineering technologies. ...
-
Senior Maintenance Engineer
4 weeks ago
Qatar Nakilat Keppel Offshore & Marine (NKOM) Full timeBachelor of Technology/Engineering(Marine, Mechanical) Nationality Any Nationality Any Vacancy 1 Vacancy Job Description Job Summary and Purpose The Senior Maintenance Engineer leverages deep understanding of maintenance strategies in order to contribute to day-to-day operational maintenance expertise and leadership and supports the Head of...
-
Maintenance Engineer
3 weeks ago
al-Jumayliyah, Qatar qatar manpower agency Full timeResponsiblity: • Dismantling,inspecting, testing, repairing, and reassembling aircraft engines. • Installing electrical circuits. • Testingcommunication, aircraft, and electronic instruments and systems. • Testing and replacing oxygen system components. • Assembling aircraft frames. • Conductingroutine preflight inspections of...
-
Lead Maintenance Engineer
4 weeks ago
Qatar Petro Staff International Full time**Petro Staff International** - Published- April 16, 2023- Location- Qatar- Category- International- Job Type- Full-time- Field or Industry- Engineering DESCRIPTION **Department** INDUSTRIAL CITY OPERATIONS (RLIC) **Primary purpose of job** Manage, lead, and control effectively the civil engineering maintenance activities, projects, contracts and...
-
Maintenance Coordinator
3 weeks ago
Qatar NES Fircroft Full timeNES is urgently hiring for a well-known Oil & Gas Company Based in Qatar, the vacancy is for Maintenance Coordinator.Job PurposeLead the execution of all maintenance support activities including the major complex tasks according to approved schedule and major jobs plan for Offshore Area to optimise the reliability and availability of...
-
maintenance supervisor
3 weeks ago
Qatar QatarEnergy Full timeDepartmentTitleMAINTENANCE SUPERVISOR (UMV) (OFFSHORE)Primary Purpose of JobEducation1st mate Foreign-Going, or Class 2 marine engineering (2nd Engineer) or equivalent.Experience & SkillsA minimum of 10 years in the Offshore Oil and Gas Industry with previous supervisory marine or maintenance operational experience is required, preferably on SBM maintenance...
-
Head, Maintenance
6 days ago
Qatar Petro Staff International Full time**Petro Staff International** - Published- August 28, 2023- Location- Qatar- Category- International- Job Type- Full-time- Field or Industry- Engineering DESCRIPTION **Department** FACILITIES MANAGEMENT **Primary purpose of job** Plan, direct, and leads the FM Facilities Maintenance and multi-disciplined Engineering section and processes supporting the...
-
Civil Engineer Building Maintenance
3 weeks ago
Qatar MSI Qatar Management Solutions International Full timeCivil Engineers are responsible for creating, improving, and protecting our immediate environment.They plan and oversee construction and rebuilding, as well as the maintenance of roads, bridges, tunnels, railways, dams, harbors, power plants, and airports.
-
Senior Rcm Engineer
4 weeks ago
Ras Laffan Industrial City, Qatar Qatargas Operating Full time**Job Posting Date**:24-Jan-2023 **Work Location**: Ras Laffan, QA **Company**:Qatargas **Job Purpose**: - Provide in-depth level execution of Reliability Centred Maintenance (RCM) & Maintenance Engineering support Services and implement a sustainable structured maintenance improvement process, based on Reliability Centred Maintenance (RCM) / Failure...
-
Maintenance Manager
4 weeks ago
Qatar International Skill Development Full time**No. of Available Positions**: - 6 **Employer**: - KATARA TOWERS HOTELS MANAGEMENT **POEA Registration/Accreditation No.**: - Approved **Country**: - Qatar **Date Posted**: - Jan 17, 2024 **Minimum Education**: - Bachelor's / College Degree **Requirements**: - Gender: Male**Job Details**: - QUALIFICATIONS - Higher Diploma or degree in...
-
Facilities Engineer
6 days ago
Ras Laffan Industrial City, Qatar Qatargas Operating Full time**Job Posting Date**:22 Nov 2023 **Work Location**: Ras Laffan, QA **Company**:QatarEnergy LNG **Job Purpose**: - Coordinate facilities maintenance activities to ensure Company building assets located in Ras Laffan and Doha are maintained to the required standards and the plant civil support requirements are addressed in a timely manner. **Job Context &...
-
Lead Planning Engineer-Mechanical
6 days ago
Ras Laffan City, Qatar KBR Full timeTitle:Lead Planning Engineer-MechanicalEngineering Degree in relevant discipline of responsibility. Seven (10) Years of continuous experience in job planning activities mentioned in scope of work, and additional 5 (Five) Years of continuous experience in direct field/equipment/asset maintenance, in large scale Oil & Gas/Petrochemical/Fertilizer process...
-
Lead Planning Engineer-Mechanical
7 days ago
Ras Laffan City, Qatar KBR Full timeTitle:Lead Planning Engineer-MechanicalEngineering Degree in relevant discipline of responsibility. Seven (10) Years of continuous experience in job planning activities mentioned in scope of work, and additional 5 (Five) Years of continuous experience in direct field/equipment/asset maintenance, in large scale Oil & Gas/Petrochemical/Fertilizer process...
-
Rotating Equipment Engineer
2 days ago
Ras Laffan Industrial City, Qatar Qatargas Operating Full time**Job Posting Date**:19-Mar-2023 **Work Location**: Ras Laffan, QA **Company**:Qatargas **Job Purpose**: - Provide technical and engineering support, with limited supervision, to stakeholders for the tasks that have limited impact ensuring technical contribution in a field of rotating equipment engineering for the department. **Job Context & Major...
-
Procurement Engineer
7 days ago
Ras Laffan Industrial City, Qatar CANDIDZONE Technologies Full time1. Source mechanical components and exotic materials for refurbishing oil field equipment, particularly rotating machinery. 2. Import and export OEM spare parts. 3. Organize shipments for machinery parts maintenance and service. 4. Handle shipping document preparation and procedures. 5. Understand local and international markets for sourcing materials in...
-
Maintenance Planner- Electrical
7 days ago
Qatar KBR Full time**Title**: Maintenance Planner - Electrical 3-years diploma in relevant discipline of responsibility. i.e., Mechanical Diploma Engineering for Mechanical Planning, Electrical diploma Engineering for Electrical Planning and Instrument/Electronics diploma Engineering for Instrument and Automation planning. Seven (7) Years of continuous experience in job...
-
Heavy Maintenance Aircraft Mechanic
3 weeks ago
al-Jumayliyah, Qatar QATAR Airways Full timeWe are recruiting for Aircraft Mechanic with Heavy Maintenance having B1 experience to be based in Doha, Qatar. Aircraft Mechanic will be responsible to deliver Aircraft Maintenance services to support the operational requirements as directed by their supervisor and will ensure all maintenance and related activities are performed in accordance with the...