Electrical & Instrumentation Qc Inspector

2 weeks ago

Qatar NES FIRCROFT Full time

BH-237708

Posted: 19/06/2023
- 0- Qatar Qatar- Contract- Oil & Gas,Petrochemical**Introduction**:

- Petrochemicals Project is currently seeking Electrical & Instrumentation QC Inspector to support the Pipeline and Early Work scope of work.
- This position will be in Qatar through the completion of the project. The total duration for this assignment is expected to be 24 months.

**General Requirements**
- Required Diploma Degree (Electrical / Electronics), but Preferred Bachelor's degree in a science-related field.
- Minimum 5 years’ experience including a proactive attitude for personal safety and the safety of co-workers, and environmentally responsible operations.
- Must have good safety approach and working knowledge of JSA, Method Statement and PTW system.
- Knowledge of recognized and generally accepted good engineering practice and codes, risk-based inspection principles, and in-service techniques.
- Good analytical and computer skills, specifically in MS Office Suite
- Inspecting electrical wiring, Instrument, equipment, and installations to ensure they comply with local codes or international standards.
- Inspecting electrical equipment such as transformers, generators, HV, MV and LV cables, grounding protection, lightening protection, and circuit breakers, to ensure they meet manufacturer specifications and ANSI/NFPA guidelines for safety.
- Should have strong working knowledge of pre-commissioning / commissioning test like DC-hipot, AC voltage withstand, insulation resistance, oil BDV, DGA etc.
- Inspecting facilities such as offices, and Treatment Plant to ensure they meet electrical safety standards.
- Providing technical assistance to engineers to meet the facilities code requirements.
- Inspecting electrical equipment to ensure they are properly installed and working efficiently.
- Witness tests to verify that electrical equipment meets industry standards and company specifications for efficiency and capacity.

**Specific Requirements**:

- Check conformity with the Quality Control Plan, obtain the relevant documentation, check procedures and equipment to be used in tests, controls, and inspections, manage documents certifying tests, controls, and inspections.
- Executes the specific inspections on materials, equipment, and construction/installation activities on site as per Inspection Test Plan (ITP), request For Inspection (RFI) and Material Inspection Request (MIR).
- Checks cable laying and cable identification.
- Witness/survey all relevant loop checks.
- Witness all offline electrical tests like Hipot, IR, continuity test of power cables, Grounding, illumination survey, no load tests run etc.
- Witness cable jointing and termination of power and control cables
- Witness erection / installation of all I&E Equipment and ensure company specs or approved drawings are complied.
- Review Method Statements, Procedures, O&M Manuals, FAT & SAT Reports.
- Review as built drawings.
- Develop punch-list as a result of inspections.
- Checks power transformers, switchboard, accumulator battery, sockets outlet, lighting system.
- Performs visual inspections, dimensional test, checks rating and material for connection.
- Witness/Survey tests of continuity, insulation resistance.
- Witness/survey safety valves calibrations.
- Witness/survey instruments calibrations
- Check installation of instruments.
- Witness/survey functional test of instruments.
- Inspect pneumatic signal connection.
- Inspect fiber optic cable.
- Witness/survey communication functionalities test.
- Verify special processes and the relevant workers’ qualifications.
- Witness the tests, controls and inspections carried out.
- Ensure the correct implementation of the approved Inspection Test Plan
- Monitor all material received at construction site as per requirements.
- Monitor the closure of Non-Compliance Report (NCR), Corrective Action Reports.
- Attend weekly Quality Standards Toolbox Talks with the Contractor QC and Construction Teams.
- Interface with EPC Contractors accordance with the roles and responsibilities.
- Providing field QA/QC support to the construction and commissioning team.
- Participate in FAT, iFAT, SAT & iSAT for DCS, SCADA, PLC, PESD, FGS, MMS, WHCP, HPUs, Well control modules.
- Must be able to remove and re-install all field instruments and be able to organize and carry out loop testing and trip testing.
- Should be knowledgeable to carry out fault finding and routine maintenance of Pressure, Temperature, Level and Flow loops, including removal and reinstallation.
- Should be able to undertake Pre-Commissioning and Functional Testing on new installations.
- Can read and understand drawings and functional logic diagrams, cause and effect matrices and control and IPF narratives.

With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Infrastructure, Life Sciences, Mining, Automotive and Chemi

  • QA/QC Procurement Inspector

    3 weeks ago

    Qatar Candidzone Technologies WLL Full time

    We are hiring a QA/QC Procurement Inspectorfor one of our clients in Doha. Candidates who have the required qualifications and good experience may apply. Desired Candidate Profile Minimum 5-6 years of experience as a QA/QC Procurement Inspection Oil & Gas projects. B.Tech Mechanical Engineering. Must have experience in Material Inspection, material...

  • QA Qc Inspector

    3 days ago

    Qatar Dynamic Staffing Services Full time

    **Qa Qc Inspector - Welding** 5-15 Years Qatar Wed Oct 11 2023 - | Vacancy Code : 135731 Industry : Mechanical, Total Vacancy : 1 - 5-15 Years - Qatar - Wed Oct 11 2023 - | Vacancy Code : 135731 Job Type : Staff, Industry : Mechanical, Contract Length : 8 months, Total Vacancy : 1 **Job Description1**: **Knowledge & Qualification**: **Role &...

  • Aveva Electrical

    5 days ago

    Qatar MPH Global Services Full time

    Industry: Oil & Gas City/Country: 0000, Qatar Location: Qatar One of our top Clients in the O&G Industry is looking for a **AVEVA Electrical & Instrumentation Administrator** with the following details: **Contract Duration: 01-Mar-2023 till 31-Dec-2025** **Contract type: Resident, Family** **Location: Doha; QATAR** **Start date: ASAP** **The **AVEVA...

  • Painting Inspector for QAtar

    4 weeks ago

    Qatar Zigma Manpower & Computer Consultants Full time

    Experience in Middle East Oil & Gas Industry. Exposure to different coating systems. Any Engineering Diploma. Working experience: 8 - 12 years with minimum 5 years as Painting Inspector. BGAS Level II or NACE Level I. Internal Auditor in QMS ISO 9001 preferred. Prepare/Review QA/QC procedures, sample plates, method statements and TPI reports. Inspection of...

  • Head - Instrument and Electrical Engineering

    1 month ago

    Qatar PETROPLAN Full time

    Primary Purpose of the Job To lead and be responsible for the Instrumentation & Control, Telecom and Electrical engineering input into the design, engineering, fabrication, installation, testing and commissioning of offshore facilities for an existing field Redevelopment Project with focus on successful on time execution of the project within budget and in...

  • Head - Instrument and Electrical Engineering

    3 weeks ago

    Qatar PETROPLAN Full time

    Primary Purpose of the Job To lead and be responsible for the Instrumentation & Control, Telecom and Electrical engineering input into the design, engineering, fabrication, installation, testing and commissioning of offshore facilities for an existing field Redevelopment Project with focus on successful on time execution of the project within budget and in...

  • QA/QC Vendor Surveillance Supervisor

    3 weeks ago

    Qatar Oil and Gas Job Search Ltd Full time

    We are looking for a QA/QC Vendor Surveillance Supervisor for one of our clients with the following details: Start date: 01-APR-2024End Date: 31-DEC-2025Location: Doha, QatarWork status: Resident, SingleACTIVITIESTo promote & comply with applicable safety instructions and other COMPANY HSE procedures.To carry out work in compliance with COMPANY values and...

  • Welding Inspector

    3 weeks ago

    Qatar Client of Zigma Manpower Computer Consultants (P) Ltd Full time

    Client of Zigma Manpower Computer Consultants (P) Ltd A welding inspector is a professional who inspects and assesses the quality and safety of welding work . They use proper techniques and tools to check welds for defects, dimensions, and compliance with codes and standards. They also inspect the welding equipment and materials, and document their...

  • Instrument Maintenance Technician

    4 weeks ago

    Qatar Shell Full time

    **The Role**: Accountability - Prepare and complete relevant QA/QC documentation for all activities and support RCA (Root Cause Analysis) investigations. - Follow Gas Game/AMS ME (Maintenance Execution) process and use SAP tools to manage notifications, work orders, material management, and job history recording. - Create and maintain a harmonious industrial...

  • Maintenance Planner- Electrical

    3 days ago

    Qatar KBR Full time

    Title:Maintenance Planner- Electrical3-years diploma in relevant discipline of responsibility. i.e., Mechanical Diploma Engineering for Mechanical Planning, Electrical diploma Engineering for Electrical Planning and Instrument/Electronics diploma Engineering for Instrument and Automation planning.Seven (7) Years of continuous experience in job planning...

  • electrical engineer

    3 weeks ago

    Qatar QatarEnergy Full time

    DepartmentMAINTENANCETitleELECTRICAL ENGINEERPrimary Purpose of Job1- Ensure the integrity and sustainability of the Gas Production Facilities at NFA by effective management of electrical equipment and control systems. 2- Manage quality Electrical maintenance implementation programs that match the department policy for the integrated Gas Production...

  • Senior Electrical Technician

    4 weeks ago

    Qatar Dynamic Staffing Services Full time

    **Senior Electrical Technician** 8-10 Years Qatar Mon Jul 10 2023 - | Vacancy Code : 134910 Industry : Mechanical, Total Vacancy : 80 - Maintenance repair of all electrical equipment; operate HT / LT network; troubleshooting of motors, circuit breakers, starters, transformers, VSDs, UPS; Microprocessor boards - 8-10 Years - Qatar - Mon Jul 10 2023 - |...

  • Senior Instrumentation Engineer

    3 weeks ago

    Qatar Brunel Full time

    • Ensure and promote Safety by implementing COMPANY HSE rules and specifications;• Contribute in promoting safety culture by reporting safety observations;• Implement QA/QC procedures for effective Quality Management and promote implementation of COMPANY policies, regulations, procedures, standards and specifications as relevant;• Carry...

  • Plant Operator

    4 weeks ago

    Qatar Dietsmann Full time

    Location: Al-Khalij Rotation: 4 weeks on/4 weeks off Contract duration: 2 years Client: TotalEnergies Category: Electricity / HVAC Country: Qatar 2023-02-21 Reference: D68-328 Dietsmann is the leading independent Operation & Maintenance and Maintenance Engineering & Inspection specialist for continuous-production plant in the oil & gas, conventional and...

  • QC Inspector

    3 weeks ago

    Qatar Link International Placement Service Full time

    Thie candidate should have 3 to 4 years experience in Architectural Glass industry.The Duty is to provide best quality in reduced operational costs.Experience in various Process control and inspection.Experienced in advanced inspection systems.Required Candidate profileTest methods for external fire exposure, testing and classification of resistance against...

  • MechanicalPiping QC Inspector

    3 weeks ago

    Qatar Heman Middle East Full time

    · Engage contractors and applicable third party organizations with a professional approach and maintain a good working level relationship.· Fully conversant with Company discipline specific, facility related technical specification requirements. · Review contractors documented quality deliverables in accordance with the requirements and...

  • Works Inspector Utilities

    3 weeks ago

    Qatar KEO International Consultants Full time

    We envisage success in this role to include;- Attending to Inspection Requests (IR's) submitted by the contractor and take appropriate action in a timely manner.- Reviewing submitted shop drawings against contract drawings and specifications, local codes and statutory requirements and international best practice.- Reporting any works carried out by...

  • Industrial Electrician

    4 days ago

    Qatar Milaha Full time

    **Description** **Roles and Responsibilities**: - Perform electrical work on various types of machinery and electrical systems. - Performs preventive and routine maintenance as per maintenance plan. - Run diagnostic tests and troubleshooting for electrical and mechanical machinery. - Install, repair and inspect various industrial electrical machinery and...

  • Project Manager

    4 weeks ago

    Qatar Kin-Tec Full time

    Construction Manager - £80k - £120k net - Saudi / Abu Dhabi / Dubai Job Role: Must be degree qualified and Chartered - Provide construction guidance to projects and proposals throughout all project phases, using construction knowledge and experience. - Assist with aspects of the project construction strategies, execution planning, and contracting...

  • Head Cost Estimating

    3 weeks ago

    Qatar Brunel Full time

    • Prepares classified / unclassified estimates during EPC phase Understands WBS process for developing the Estimation Cost Breakdown Structure;• Develop measures and reporting system aligned with bench marking to achieve pacesetter levels;• Can develop take-offs from Civil, Structural, Piping, Electrical Single Line and Process &...