Qc Inspector Ii

3 months ago


Doha, Qatar Future Pipe Industries Full time

Reports to: QC Manager

Category: FTE

Unit / Division / Department / Section: QC

Location: Qatar
- ___

JOB PURPOSE

Responsible for ensuring that all the Pipes and Couplers are manufactured to the quality standards laid down and that every item is inspected and stamped QC OK when ready for release to the Final Warehouse

KEY ACCOUNTABILITIES

Policies & Procedures
- Comply with operational procedures and instructions when performing all job tasks and activities

In-process inspection
- Ensure only approved and QC accepted raw materials are used in the manufacturing process
- Ensure that the production process comply with the technical Know-How documents & Quality Assurance Procedures
- Conduct the refractive index check of the epoxy resin/hardener mix ratio to ensure it meets the set requirements
- Check and monitor the ambient temperature and humidity
- Witness the production processes and ensure that the relevant approved Raw Material Calculation and Machine Set ups are followed to meet the project requirements
- Inform the non-conformances immediately to the responsible Machine Captains and other employees in the Production and QC departments so corrective actions can be taken

Online / Offline Inspection of Pipes and Couplers
- Inspect the Pipes and Couplers as per the requirements of product drawings following the inspection and testing program
- Select QC samples during the production process as per the inspection program and/or project ITPs as applicable

Trading materials inspection
- Inspect the products purchased from the other manufacturing units or sub supplier and ensure that those products meet the project specification requirements and release them for delivery
- Inspect the locking strips, different types of gaskets such as Kroll and Ziller, O-rings, flat gaskets in order to ensure the quality meets the minimum specified requirements

Non-destructive testing
- Conduct the non-destructive tests as per the ITP requirement
- Witness the routine hydro tests for the Pipes and Couplers

Destructive Testing
- Conduct the destructive tests in accordance to the ITP requirements and project commitments agreed with the Client/consultant
- Witness and monitor the short term and medium term survival tests periodically and ensure the tests are not affected with any climatic effects and successfully completed as per the project requirements

Preparation of reports, TPI inspection and release
- Prepare the daily QC internal reports as well as project specific documentation (Manufacturing Record Book - MRB) to be submitted to the Client
- Carry out the final inspection and release together with the Customer TPIs and Client TPIs for all the products comes under the major projects based on the project specific requirements. Also perform additional tests as per the ITP for the witness point of Customer/Client

Stock counting
- Participate and lead a small team of employees during the Half
- yearly and Yearly stock counts to ensure that the physical inventory matches the ERP system inventory
- Carry out monthly stock counting for the major raw materials in the stores warehouse and provide the actual data to the QC Engineer for monthly RM stock count report

Mould & Socket Sleeve inspection
- Carry out steel mould and socket sleeve inspection either at factory of at supplier’s premises as per the relevant engineering drawings to ensure that those moulds are manufactured as per the given approved drawings

HSE
- Comply with relevant safety, quality and environmental control procedures and instructions
- Use personal protective equipment and safety gear when performing assigned tasks
- Keep operational areas clean and well organized to prevent incidents and accidents
- Report unsafe acts, incidents or safety violations
- Develop a safety culture by ensuring all staff comply with HSE policies and procedures
- Participate in QHSE audits, incident reporting and review of QHSE performances as require

SPAN OF Communication
- Internal: Production, Projects and Delivery Departments
- External: Third Party Inspectors

Job relevant information (BOUNDARIES & DECISION-MAKING AUTHORITY)
- The jobholder has the authority to reject any product that does not meet QC set standards, with the approval of direct manager

**Skills**:
Required Qualifications:

- Technical School Certificate / On Job Training

Preferred Experience:

- At least 2 years of pipe manufacturing experience
- Engineering Degree / Diploma (Civil or Mechanical)

Job-Specific Skills:

- QC inspection and testing of Raw Material and finished products.
- Reading and interpretation of engineering drawings
- Ability to prepare reports
- Ability to use measuring and testing equipment

COMPETENCIES
- Self-motivated
- Teamwork
- Accurate and attentive to details



  • Doha, Qatar China Eleventh Chemicals Construction WLL Full time

    Direct, Supervise and Participate in inspection activities to ensure product quality - Project Quality Plan/Procedures necessary to achieve product quality - Initiate evaluation for non-conforming items - Develop Project Quality Plans, inspection, and test plans in consultation with Project Quality Manager - Liaise with QC/NDT/Certification/Welding Team and...


  • Doha, Qatar Swan Global WLL Full time

    Urgently Hiring - QC welding/piping inspector Job Location: - Raslaffan, Qatar Contract Duration: - 12 Months **Salary**: - To be discussed Work Hours: - 10Hr/6 Days **Qualifications**: - Code knowledge for ASME B31.3, ASME B31.8, ASME Sec. IX, ASME Sec.V **Experience required**: minimum 10 years oil & gas experience. **Required certification**:...


  • Doha, Qatar Atlas Dias Full time

    We are Hiring QA/QC Welding Inspector Qualifications: Minimum 5-7 years of experience in quality assurance for the repair of plant equipment/items. Certified Welding Inspector 3.2.2, with a strong understanding of quality assurance and control. Preferred: Level-II certification in RT, UT, MT, PT, VT. Engineering background or technical education from a...

  • Qc Inspector

    5 months ago


    Doha, Qatar Ruby Information Technology Solutions Full time

    QC INSPECTOR-CIVIL Any nationality. Should have experience as QC inspector. Qatar/GCC experience is mandatory. Minimum 7 years' experience required. Must have oil and gas experience. Must have UPDA. Send your CVs to: **Education**: - Bachelor's (required) **Experience**: - oil and gas: 7 years (required) **Language**: - english (required) Ability to...


  • Doha, Qatar ELECO Full time

    Direct, Supervise and Participate in inspection activities to ensure product quality - Project Quality Plan/Procedures necessary to achieve product quality - Initiate evaluation for non-conforming items - Develop Project Quality Plans, inspection, and test plans in consultation with Project Quality Manager - Liaise with QC/NDT/Certification/Welding Team and...

  • QA/qc Inspector

    5 months ago


    Doha, Qatar ( Outsourcing & Recruiter ) Full time

    QA/QC INSPECTOR QUALIFICATIONS: - BSC - 7 YEARS TOTAL EXPERIENCE - PWA EXPERIENCE - 5 YEARS EXPERIENCE IN QA/QC INSPECTOR - MUST BE IN QATAR - UPDA B HOLDER **Experience**: - QATAR: 7 years (preferred) - ELECTRICAL INSPECTOR: 7 years (preferred) License/Certification: - UPDA B (preferred)


  • Doha, Qatar Atlas Dias Full time

    **Job description** **Job Title**: QA/QC Welding Inspector **Project Duration**: 3 months **Site** : MIC **Requirements**: Must have a valid CSWIP 3.2.2 certification. Qatar Energy Approval required. Freelancers preferred, with immediate availability. Salary : Negotiable based on experience **Certifications**: - CSWIP - 3.2 - Level II certification in...

  • Qc Welding Inspector

    2 months ago


    Doha, Qatar Drawlines Consult WLL Full time

    **DRAWLINES ENGINEERING CONSULT** is looking for **QC Welding Inspector** in Doha, Qatar **Project Duration **:6 Months Extendable **Project Site Location**:Mesaieed **Qualification**: - Welding Inspectors shall have at least five (5) years of current experience as welding Inspectors in a fabrication/project environment and have valid **CSWIP 3.1...

  • Qc Inspector

    5 months ago


    Doha, Qatar Facilities Management and Maintenance (FMM) Full time

    **Immediate Hiring for a Prestigious Project** **QC Inspector -Electrical** **Requirements**: - University Degree/Diploma in Engineering (Electrical) - Minimum of 2/3 years of experience as QC inspector/Engineer. - Internal auditor/Lead auditor training, or any other Quality discipline training will be an added advantage. **Job Types**: Full-time,...

  • Qc Inspector

    2 weeks ago


    Doha, Qatar Lanco Engineering Full time

    **Urgent Hiring!!** **QC Inspector** **8 Years of Experience** **Should have Mechanical background** **Location**: **New Industrial Area** **Duration: 1 month** **Immediate joining is required** **Experience and education required**: - Diploma/Engineering Degree in Mechanical required. - NDT (RT & UT) Certification. - 6-8 years of previous experience...


  • Doha, Qatar Drawlines Consult WLL Full time

    **Drawlines Consult W.L.L **is amongst the leading BIM & CAD design solution firms. We build success and reputation for our clients with high-quality and cost-effective BIM modeling, CAD drafting, Design Support, Interior design, and Engineering Workforce solutions. Over the years, we have partnered in delivering numerous small, medium, and mega projects...

  • QA/qc Inspector

    5 months ago


    Doha, Qatar ( Outsourcing & Recruiter ) Full time

    Our Company is looking for: QA/QC Inspector Qualifications: - 7 Years of Experience - UPDA - Consultancy Experience - Experience working with PWA (preferred) **Job Type**: Temporary Ability to commute/relocate: - Doha: Reliably commute or planning to relocate before starting work (required) **Education**: - Bachelor's (preferred) **Experience**: -...


  • Doha, Qatar Project Support Service co Full time

    Urgent Hiring!!! We are looking for a QC painting and coating inspector. please see the requirements below; - **Requirements**:_ - should have Knowledge of NACE, BS, SSPC, TWI, and codes relevant to the scope of work - Should have CIP level 2 or above CSWIP grade 2 - Experience: Minimum 10-15 years as inspector or lead inspector **Experience**: - QC...

  • Qc Inspector

    5 months ago


    Doha, Qatar Sanmar Trading Contracting WLL Full time

    Should have previous experience as QC Inspector in oil & gas projects preferably with previous ARAMCO approval. Should have Bachelor or Diploma in Engineering **This requirement is for KSA Projects** **Job Type**: Permanent Pay: From QAR7,000.00 per month

  • Qc Inspector

    6 months ago


    Doha, Qatar Facilities Management and Maintenance (FMM) Full time

    **Requirements**: - University Degree/Diploma in Engineering (Electrical) - Minimum of 2/3 years of experience as QC inspector/Engineer. - Internal auditor/Lead auditor training, or any other Quality discipline training will be an added advantage. - NOC and valid QID is required - WhatsApp: +974 77638997_ **Job Types**: Permanent, Contract Contract length:...

  • Qc Welding

    2 months ago


    Doha, Qatar GLOBAL STRATEGIC SERVICES Full time

    **Welding inspector -** - Qualification: Mechanical Degree or equant - Technical qualification: CSWIP 3.1 certification and ASNT level II in RT,PT,MT and UT - Scope : Piping, Tanks and structure in Oil and Gas projects - Experience :Min 5 years after CSWIP 3.1 certification. **Painting Inspector** - Qualification: Mechanical Degree or equant - Technical...


  • Doha, Qatar Lanco Engineering Full time

    **QC Inspector Coating** - Minimum of 3-5 years of experience as a QC Inspector coating - Experience within the Oil & Gas or Construction sectors. - Education in materials science, corrosion engineering, or a related field - Additional technical certifications in painting and coating inspection are preferred. - Proven experience in inspecting and testing...

  • Civil QA/qc Inspector

    5 months ago


    Doha, Qatar Lanco Engineering & Contracting W.L.L Full time

    **Civil QA/QC Inspector** - Minimum 4 years of experience - Infra Experience is mandatory - Duration : 2 Months - Immediate joiners only **Job Type**: Contract **Experience**: - QA/QC Inspector: 3 years (required) - Infrastructure/Road: 3 years (required) Ability to Commute: - Doha (required)


  • Doha, Qatar ( Outsourcing & Recruiter ) Full time

    We are looking for: **QA QC WELDING INSPECTOR** Qualification: - QG North SD experience ( Qatar Gas North experience) - Working Hours: 12 Hrs - Duration: 2 -3 Months cswip 3.1 **Experience**: - qatar gas: 5 years (preferred) - QA QC WELDING INSPECTOR: 5 years (preferred)

  • Qc Inspector

    6 months ago


    Doha, Qatar Suhail Industrial Holding Group Full time

    **1. Job Purpose**: The QC Inspector is responsible for inspecting incoming, in-process and final inspection with CMM and measuring Instruments. **2. Key Responsibilities**: - Perform first off in-process and final incoming inspection - Document and record maintained of all receiving and product inspection reports - Understand and interpret drawings and...