Sealine Coating Engineer

4 days ago


Doha, Qatar Brunel Full time

**About this role**
- Promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities;
- Carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices;
- Follow-up of engineering development activities progress related to coating systems. The scope of activities will concern both FEEDs, detailed design and construction contracts. The activities include the review and comment of engineering and vendor documentation to ensure compliance with design dossier, SOR, Company specifications, Corporate standard and HSE regulation, international codes and classification society rules;
- Participate in the redaction of the scope of work related to coatings systems for FEED contracts and EPC contracts;
- Supervise, control, review and co-ordinate pipeline coating engineering discipline development in compliance with project specifications and procedures, COMPANY specifications, international with respect of cost, schedule and required level of quality and safety applicable to this project;
- Review and approve, in accordance with applicable procedures and requirements, the various engineering and vendor documents issued by CTR. Identification of any optimization / improvement in the design dossier in relation with pipeline coating to be implemented in the early stage of project execution, in line with management instructions;
- Identify potential deviations from the COMPANY referential, write and submit them to the Engineering Manager for instruction and final decision from COMPANY;
- Provide technical answers and clarifications to internal project audit sessions (PR, HAZOP, etc );
- Contribute to the engineering interfaces;
- Ensure close coordination with other disciplines;
- Liaise with technical authority for any issue related to coating COMPANY standards;
- Assist during execution of fabrication, transportation, and installation, liaise with QC resident personnel and site representative for preservation and all types of coatings from surface preparation to repair procedures;
- Assess performance of dedicated personnel for painting and coatings, advise on selection and training requirements;
- Ensure that relevant feedback from previous similar projects are considered in the design performance, Participate actively in technical decision making, in meetings with potential contractors and vendors, Participate in the technical analysis of offers and assist in vendor selection, Assistance in the finalization of contractual documents, Participate in weekly and monthly meetings with Contractors, and in specific ad hoc meetings as required by management, Provide technical answers to technical queries and provide support in deviations requests related to corrosion and painting issues, Manage assistance from shareholder specialists (remote head office), when required, Participate in the project reviews sessions with COMPANY, Contractors and vendors teams;
- Ensure detailed progress reporting to project management;
- Assist project management team to reply to various correspondence by providing technical support;
- Carry out any other duty or task that may be assigned by hierarchical superiors in line with discipline expertise;
- Treat all information obtained during course of the work with confidentiality.

**What you need to bring**
- Qualification: degree in corrosion or coating engineering, NACE or FROSIO level 3 qualified;
- Experience: at least 10 years in Coating engineering and construction for Oil & Gas projects (Engineering companies, Construction plants/yards);
- Available for technical missions worldwide;
- Familiar with international standards;
- Language: Fluent English;
- Computer literate;
- Strong leadership skills and good communication skills;
- Ability to work on projects in a complex and multicultural environment;
- Good analytical skills.

Academic Bachelor



  • Doha, Qatar MPH Global Services Full time

    Ensure that the assigned projects tasks are well managed as per the statement of requirement, COMPANY specifications and contractual requirements, - Ensure that all the interfaces with the design team are correctly managed, - Ensure that the projects are executed in accordance with the organization's safety regulations, with quality conformance and within...


  • Doha, Qatar MPH Global Services Full time

    Category: Oil and Gas Industry: Oil & Gas City/Country: Doha, Qatar Location: Doha - Ensure that the assigned projects tasks are well managed as per the statement of requirement, COMPANY specifications and contractual requirements, - Ensure that all the interfaces with the design team are correctly managed, - Ensure that the projects are executed in...

  • Coating Supervisor

    2 days ago


    Doha, Qatar Brunel Full time

    **About this role** - Be fully aware of the COMPANY HSE requirements - Ensure that all activities and works in responsibility are done in full compliance with the HSE requirements of COMPANY and the relevant Authorities - Directs and provide close onsite supervision of all jobs being performed by the contractors in the assigned area within COMPANY...

  • Coating Inspector

    7 months ago


    Doha, Qatar Nakilat Full time

    **Job Summary and Purpose**: Provide oversight and due diligence inspection of all cryogenic equipment during the construction of LNG / LPGLPG vessels built at the selected shipbuilding site for the Nakilat newbuilding programs. Attend scheduled inspections, commissioning(s), tests, demonstrations, and trials in accordance with the shipbuilder’s published...

  • Coating Foreman

    1 day ago


    Doha, Qatar TRG HUMAN RESOURCES Full time

    Position: Coating Foreman/Chargehand Department / Division: Coating and Insulation / MSD Reports to: Coating Supervisor/ Coating & Insulation Engineer Duties & Responsibilities: - Lead painting works of different types of steel structure, various types of diameter pipeline as per client requirement. - Quantity surveying and planning of materials available...


  • Doha, Qatar Brunel Full time

    Brunel is a global provider of flexible workforce solutions and expertise, connecting specialists with clients across the globe. We deliver innovative services like Recruitment (people, talent, and training), Logistics (global mobility and travel), Technical Services (project support and setup) and Consultancy to our clients both globally and...


  • Doha, Qatar SGS Full time

    **Company Description**: - SGS is the world's leading inspection, verification, testing and certification company. We are recognized as the global benchmark for quality and integrity. With more than 99,600 employees, we operate a network of more than 2,600 offices and laboratories around the world._ The duration of this job is for a short-term contract for...


  • Doha, Qatar McDermott Full time

    **Job Overview**: Supervise QC Coating Inspectors to assure timely execution of inspection activities. Assure that the specified protective coating meets the project requirement. Liaise with CQM, PQM, Quality Inspectors, Certification Specialist, Certification Tech, Associate Certification Tech, Engineering Group, Procurement Group, Bid Coordinator, Sub-con...


  • Doha, Qatar Lanco Engineering Full time

    **QC Inspector Coating** - Minimum of 3-5 years of experience as a QC Inspector coating - Experience within the Oil & Gas or Construction sectors. - Education in materials science, corrosion engineering, or a related field - Additional technical certifications in painting and coating inspection are preferred. - Proven experience in inspecting and testing...


  • Doha, Qatar ASMACS QATAR Full time

    **OIL & GAS COATING SUPERVISOR-supervise and direct coating works** **Qualifications** - locally based in Doha for immediate joining with **QID** and **NOC**: - **8 years in experience in Oil & Gas blasting/coating/maintenance**: - **Diploma** **Civil or Mechanical Engineering/** **Certified with NACE level -2 or Equivalent** **Salary 4900 QR...


  • Doha, Qatar ASMACS QATAR Full time

    **OIL & GAS COATING SUPERVISOR-supervise and direct coating works** **Qualifications** - locally based in Doha for immediate joining with **QID** and **NOC**: - **8 years in experience in Oil & Gas blasting/coating/maintenance**: - **Diploma** **Civil or Mechanical Engineering/** **Certified with NACE level -2 or Equivalent** **Salary 4900 QR/...

  • Coating/qc Inspector

    4 months ago


    Doha, Qatar AL Jameh Group General Trading and Contracting Full time

    **COATING/ QC INSPECTOR** **Eligibility Criteria**: Minimum 5 years of verified experience in oil and gas industry in similar capacity and shall possess NACE-II, B GAS level 2, FROSIO, I Corrlevel-2 or equivalent. **QUALIFICATION**:Diploma/ Degree/ BSc - Mechanical Engineering **LOCATION**: QATAR **JOINING**: 15 SEPT 2024 **SALARY**:5000 -5500 QAR...

  • Quality Inspector

    7 months ago


    Doha, Qatar McDermott Full time

    **Job Overview**: To determine product conformity to customer specification through independent inspection and tests in accordance with the Project Quality Plan and Procedure. Identify product conformity for rectification and assure final resolution. Liaise with Painting Production Supervisions, Principal Certification Specialist, Discipline Engineer...


  • Doha, Qatar Orion Full time

    **Job description**: **Activities** **Ensure Engineering Dossier are delivered with a robust definition and fit for purpose design that can be procured, fabricated, transported, installed, and operated safely, meeting the requirements of Company standard, project basis of design, and SOR** - Manage, control, and coordinate the proper realization of the...


  • Doha, Qatar NES FIRCROFT Full time

    Leads the monitoring and oversight of the NFXP Topsides contractor team field planning, coordination, and execution activities within designated area of responsibility. Appraises the performance of the NFXP Topsides contractor team in safety, quality, cost (as applicable) and schedule Ensures that the NFXP Offshore Topsides contractor’s insulation,...


  • Doha, Qatar SGS Full time

    **Company Description**: - SGS is the world's leading inspection, verification, testing and certification company. We are recognized as the global benchmark for quality and integrity. With more than 99,600 employees, we operate a network of more than 2,600 offices and laboratories around the world._ The duration of this job is for a short-term contract for...

  • Coating Inspector

    7 months ago


    Doha, Qatar قطر للطاقة Full time

    **Company** QatarEnergy is an integrated national oil corporation that stands at theforefront of efforts for the long term sustainable development,utilization and monetization of oil and gas resources in the State ofQatar. In its efforts to become one of the best national energycompanies in the world, QatarEnergy's activities and those of itssubsidiaries...

  • Coating Lead

    7 months ago


    Doha, Qatar Nakilat Full time

    **Job Summary and Purpose**: **Accountabilities**: **Key Accountabilities**: - Act to ensure that the shipbuilder's efforts fully meet the expectations of the shareholders and are in accordance with the contract, specifications, approved plans, and the various memorandums of agreement. - Attend or appoint for attendance a member of the site staff at all...


  • Doha, Qatar Brunel Full time

    Brunel is a global provider of flexible workforce solutions and expertise, connecting specialists with clients across the globe. We deliver innovative services like Recruitment (people, talent, and training), Logistics (global mobility and travel), Technical Services (project support and setup) and Consultancy to our clients both globally and...


  • Doha, Qatar Gulf Overseas HR Consultancy Full time

    **Key Responsibilities**: - Inspect and monitor painting, coating, and insulation work to ensure compliance with approved procedures, specifications, and quality standards. - Ensure that all work complies with safety regulations and industry standards. - Review and approve quality control documentation, including reports, inspection records, and test...