Qc Coordinator

3 weeks ago

Doha, Qatar MPH Global Services Full time

Category: Oil and Gas
Industry: Oil & Gas
City/Country: Doha, Qatar
Location: Doha

**JOB TITLE** - **QC Coordinator**

**ACCOUNTABILITIES**

The job holder is accountable for the following activities during project execution by Engineering & Construction Division:
To ensure the performance of the EPCIC Contractor, Subcontractors and Construction Yard, is achieving the Project Quality requirements during yard fabrication, construction and load-out/sea fastening works.

Provides the necessary back-up to Project QA/QC Engineer of COMPANY regarding contractual issues relating to Quality during execution phase.

Drive, monitor and liaise with relevant entities to ensure QA/QC related COMPANY rules, standards and procedures are implemented in the execution of the DBN PWM & AB OBS Project by the Contractor.

To Coordinate the Quality Control activities on the Construction yard with a strong support of Metallurgy, Welding and Non-destructive Testing.

To provide necessary information to Pre-Commissioning Team.

To treat all information obtained during course of the work with confidentiality,

To assist other technical disciplines in the implementation of Quality Requirements.

Direct, advice and coordinate with CONTRACTOR QC personnel, site QC Inspectors etc. to ensure all QC deliverables are obtained

**ACTIVITIES**
- To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities,
- To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices,
- To report regularly to his hierarchical superior and carry out any other duty or task that may be assigned,
- Coordinate the COMPANY dedicated DBN PWM & AB OBS Quality team, conduct necessary meeting, act as COMPANY Quality focal point in front of Contractor and Subcontractor at work site and offshore.
- Participate in the establishment and implementation of a suitable Audit Program to cover Contractor and Subcontractors main critical processes,
- To review and approved the Quality Documentation applicable to construction yard issue by the Contractor and Subcontractors,
- Review and approved the different inspection reports issued by the Contractor,
- To implement the QC activities based on the criticality assessment and surveillance level.
- Manage all Company quality inspections related to material, welding, NDT and coating/painting activities, both Onshore and Offshore.
- Ensure that material, welding, and NDT traceability system is maintained throughout the fabrication process,
- Ensure that there is no backlog for inspection performance, reporting and data base update,
- Ensure that construction verification activities by the Certifying Authority are in line with Contract requirement,
- Issue Non-Conformance reports or review Contractor Non-Conformance reports and validate dispositions. Intervene as necessary where warranted,
- Be the leader in the implementation of the change management process (DEV/TQ/CON) for QC and NDT,
- Participate in the weekly meeting and in the issuance of weekly report and KPIs,
- Review and validate manufacturing records books,
- At the end of the mission, issue Return of Experience (REX) report to capture feedback regarding QC issues met during Fabrication and Construction.
- Proactively identify any potential Quality failures and report to Lead as required.
- Carry out any other relevant duties or tasks that may be assigned by reporting line
- ** Qualification**:
Engineering Degree or experienced technician with HND/HNC and minimum of 15 years experiences in the oil and gas industry,
- Professional Experience : Around 10 years of experience associated with Quality Management in Quality Assurance and Quality Control, coordination of quality activities within Engineering, Procurement, Construction, Hook-up, Brown-Field, Pre-Commissioning, Commissioning and Start-up projects of offshore facilities (jacket/topsides) in the Oil and Gas Industry,
- Certified to - Welding:

- AWS SCWI, CSWIP Grade 3.2 or EWIP/IWIP-C or COMPANY approved equivalent. NDT:

- ISO 9712, ASNT. Preferably Certified and Experienced in Coating Activities.
- Good reporting skills and use of Microsoft reporting tools.
- Knowledge of QHSE audit/inspection techniques and procedures with regards to construction yards and O&G facilities.
- Familiar with General Specifications, EDMS and relevant codes and standards,
- Language: Fluent English,
- Computer literate,
- Strong leadership skills and good communication skills,
- Ability to work on projects in a complex and multicultural environment,
- Good analytical skills,
- H2S OPITO and T-BOSIET trainings

  • Offshore Qc/ndt Coordinator

    2 weeks ago

    Doha, Qatar Brunel Full time

    We are looking for an Offshore QC/NDT Coordinator which our client requires to perform validation and acceptance of contractors’ ultrasonic survey works as third-party representative. Raise / Close Work Orders, coordinating and overseeing ultrasonic / NDT survey works. **About this role** - Verify, approve contractors ultrasonic survey works and...

  • QA/qc Engineer

    2 months ago

    Doha, Qatar Brunel Full time

    The QA/QC Engineer [CAT III projects] is a project-specific quality focal point, interfacing with COMPANY project stakeholders and contractors to ensure QA/QC compliance for effective handover. - This role is responsible for quality assurance and quality control during detail engineering, procurement, and construction project phases, including coordination...

  • QA/qc Engineer

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Brunel Full time

    The QA/QC Engineer [CAT III projects] is a project-specific quality focal point, interfacing with COMPANY project stakeholders and contractors to ensure QA/QC compliance for effective handover. This role is responsible for quality assurance and quality control during detail engineering, procurement, and construction project phases, including coordination of...

  • QA/qc Engineer

    3 weeks ago

    Doha, Qatar MPH Global Services Full time

    Category: Oil and Gas Industry: Oil & Gas City/Country: Doha, Qatar Location: Doha MPH Is currenly recruiting for a QAQC Engineer duration till March 2025 ACCOUNTABILITIES Under DBN PWM Project Lead, Planning and implementation of the Quality Assurance activities within the project and coordination of the project Quality Control activities...

  • QA/qc Coordinator

    3 weeks ago

    Doha, Qatar Project Support Service co Full time

    Urgent Hiring!!! send us your detailed CV. Ability to commute/relocate: - Doha: Reliably commute or planning to relocate before starting work (required) **Experience**: - QA/QC (Oil & Gas): 7 years (preferred)

  • Qc Engineer/inspector

    5 days ago

    Doha, Qatar SIGMA Contracting & Trading Full time

    **POSITION**: QC Engineer/Inspector **REPORTING TO**: Direct Supervisor: Project Manager / QA/QC Engineer. Indirect reporting to Head of Quality Department **Minimum Qualifications**: Qc Engineer: Engineering Degree + 3 years of experience. QC Inspector: Diploma in engineering + 8 years of experience. **KEY RESPONSIBILITIES: - ** **1. Inspection...

  • QA/qc Coordinator

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Project Support Service co Full time

    Urgent Hiringsend us your detailed CV.Ability to commute/relocate: Doha: Reliably commute or planning to relocate before starting work (required)Experience: QA/QC (Oil & Gas): 7 years (preferred)

  • Sr. QA/qc Engineer

    5 days ago

    Doha, Qatar SIGMA Contracting & Trading Full time

    **POSITION**: Sr. QA/QC Engineer - QA/QC Engineer **REPORTING TO**: Direct Supervisor: Project Manager Indirect reporting to Head of Quality Department **Minimum Qualifications**: Engineering Degree + 10 years of experience, 2 of them in in Sites Quality Management. **KEY RESPONSIBILITIES: - ** **1. Implementation of QA/QC Activities**: - Ensure that...

  • QA/qc Engineer

    3 weeks ago

    Doha, Qatar Al wakeel group Full time

    WE ARE HIRING URGENTLY REQUIRED NOW! Local hiring with own valid Qatar ID, Driving license QA/QC Engineer A minimum of Ten (10) years’ experience in field QA/QC construction of road and infrastructure projects. Role and Responsibilities: The QA/QC Engineer will be responsible for maintaining and following the quality plan at site. In addition, he will...

  • QA/qc Engineer

    2 weeks ago

    Doha, Qatar Parsons Full time

    **QA/QC Engineer** Qatar **What You'll Be Doing**: - The QA/QC Engineer is part of the Supervising team who will monitor the preparation and establishment of the Quality Assurance (QA) by the contractors. - The QA/QC Engineer will assist the QA/QC Manager in monitoring the implementation of the Parsons’ Management System in compliance with the Parsons...

  • QA/qc Engineer

    1 week ago

    Doha, Qatar Brunel Full time

    **QA/QC Engineer will **ensure** that the quality of engineering, procurement, construction, installation of new equipment, modifications and repairs for onshore plant and offshore facilities is meeting the requirements of Codes, Standards, Specifications and Company Policies and Procedures.**: - ** Reports to Lead of Plant QA/QC.**: - ** Required to...

  • QA/qc Lead

    5 days ago

    Doha, Qatar Brunel Full time

    **Lead **QA/QC will **ensure that the quality of engineering, procurement, construction, installation of new equipment, modifications and repairs for onshore plant and offshore facilities is meeting the requirements of Codes, Standards, Specifications and Company Policies and Procedures.**: - ** Reports to Head of Plant QA/QC.**: - ** Required to supervise...

  • QA Qc Engineer

    2 weeks ago

    Doha, Qatar SHADE Full time

    Liaise with the Client/Consultant for the conduct of day to day quality related activities of the project. Responsible for coordination all inspection and test requirements of the project at all stages of process/production as per the PQP and contract requirement. Preparation of project specific procedures, work instruction & QC plans. Responsible for...

  • Senior QA/qc Engineer

    2 weeks ago

    Doha, Qatar Parsons Full time

    **Senior QA/QC Engineer** **Qatar** Parsons is looking for an amazingly talented **Senior QA/QC Engineer **to join our team! In this role you will get to be part of the supervising team to monitor the preparation and establishment of the quality assurance. **What You'll Be Doing**: - The QA/QC Engineer is part of the Supervising team who will monitor the...

  • Senior Technical QA

    3 weeks ago

    Doha, Qatar S.h.e.l.t.e.r Full time

    The preparation of the companies QA manual control and supervision of all amendments and revisions - Control and the distribution of all the companies quality documentation - Monitor all quality related activities on the project - Perform all internal and external audits on behalf of the companies management - Verify contractor quality requirements are...

  • QA/qc Senior

    3 weeks ago

    Doha, Qatar EGEC QATAR Full time

    **Job Summary**: QA/QC Engineer is responsible for Projects QA/QC works/ implementing a quality management system (QMS); and Supporting all EGEC’s projects by ensuring compliance with QMS requirements. **Duties & Responsibilities, (include but not limited to)**: - Responsible for the quality and workmanship of every activity, thorough knowledge of all...

  • QA/qc Senior

    3 weeks ago

    Doha, Qatar EGEC QATAR Full time

    **Job Summary**: QA/QC Engineer is responsible for Projects QA/QC works/ implementing a quality management system (QMS); and Supporting all EGEC’s projects by ensuring compliance with QMS requirements. **Duties & Responsibilities, (include but not limited to)**: - Responsible for the quality and workmanship of every activity, thorough knowledge of all...

  • QA/qc Inpector

    3 weeks ago

    Doha, Qatar Drawlines Consult WLL Full time

    **Drawlines Consult** is amongst the leading BIM & CAD design solution firms. We build success and reputation for our clients with high-quality and cost-effective solutions in BIM modeling, CAD drafting, Design Support, Interior design, and Engineering Workforce solutions. Over the years, we have partnered in delivering numerous small, medium, and mega...

  • QA/qc Mep Engineer

    3 weeks ago

    Doha, Qatar Candidzone Full time

    We are hiring for **QA/QC MEP Engineer** **Responsibilities**: - Pre-Inspection & Preparation of INR, MIR and coordinate with consultant for Approval. - Preparation of the Project Specific method statement, Inspection and Test Plans, Checklist, and related procedures - To identify and resolve any site issues on the work site. - Coordinate with HSE...

  • QA Qc Architectural Inspector

    3 weeks ago

    Doha, Qatar Valerian Trading & Contracting Co. Full time

    **!!! Urgent Requirement !!!** **Immediate Hiring** **QA QC Architectural Inspector** **A minimum of 5+ Years of Experience is required** **Should have experience in Day to day **i**nspection, Material Inspection Concrete Witness & Monitoring, Arch. Finishing & TPI Coordination.** **Should be available for immediate joining** **Must have a Bachelor's...