Senior Commissioning Engineer

1 week ago


Doha, Qatar McDermott Full time

**Job Overview**:
The Senior Commissioning Engineer uses best practices and knowledge of internal or external issues to improve the Commissioning discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Commissioning discipline. The Senior Commissioning Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. They impact a range of customer, operational, project, or service activities with the Commissioning team and other related teams and ensure that they are working within the appropriate guidelines and policies.

Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.

For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

**Key Tasks and Responsibilities**:

- Report to the Commissioning Manager and provide support to the Principal Commissioning Engineer in the preparation of home office deliverables
- At the site, the Senior Commissioning Engineer will participate in walk-down inspections, punch listing, and testing including troubleshooting of mechanical, electrical & instrument component issues that can arise on the project
- Work collaboration within the Project team and with the Client to maintain positive relationships
- Required to support the commissioning team with performing any of the following activities as a minimum
- Operate and maintain Manuals development
- Commissioning and Start-up Spares development
- First Fills and Consumables development
- Commissioning, and Start-Up Procedures
- Discipline Equipment system checks and tests
- Function testing of mechanical, electrical, and instrument systems
- Participate in Commissioning, Start-Up and Performance Testing
- Resolve operational and maintenance issues during Commissioning, Start-Up, and Performance Tests
- Supervise craft personnel required for site pre-commissioning and commissioning activities
- Coordinate activities with other engineers in the commissioning team

Reports to:
Project: Project Commissioning Manager
Functional: Function Commissioning Manager
Liaise with: Commissioning Manager, Discipline Lead Engineers, Project Engineers, Construction/Fabrication team
Supervises: Commissioning Engineers, Completions Specialists, Operation & Maintenance specialists, Designers, and support
personnel within the function group

**Essential Qualifications and Education**:

- Bachelor’s degree or equivalent in Engineering
- 8-15 years of experience in oil and gas with a major contractor or consultant
- Requires a good understanding of concepts, principles, and practices in commissioning, completions, and training as well as basic knowledge of other functions, such as construction and operations & maintenance
- Applies understanding of the industry to improve effectiveness
- Preferably possess a degree or diploma or equivalent in engineering
- Have a minimum of 5 years of experience in a chemical, refinery, or oil & gas processing facility
- Prefer 2+ years of previous commissioning and start-up experience in the chemical, refinery, or oil & gas industry
- Able to effectively communicate technical solutions and concepts to other engineers and non-engineers
- Must have good computer software skills in MS Word, Excel, PowerPoint, and Visio
- Must have good organizational skills and be adaptable to the needs of various discipline groups
- Must have the ability to assess and communicate project requirements and expectations in a clearly defined, positive, and productive manner
- Willing and able to travel to construction sites on assignments to international sitesProficiency in English, Multi-Language skills a plus

LI-AL2



  • Doha, Qatar McDermott Full time

    **Job Overview**: The Senior Commissioning Engineer uses best practices and knowledge of internal or external issues to improve the Commissioning discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Commissioning discipline. The Senior Commissioning...


  • Doha, Qatar McDermott Full time

    **Company Overview**: People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea...


  • Doha, Qatar Brunel Full time

    Responsible and accountable for execution of commissioning, start-up, and hand-over of Industrial Cities (VI) assets/facilities in projects and to ensure that: - Industrial Cities Asset Owners are fully ready to assume ownership of the commissioned project deliverables (facilities) at the point of delivery/handover stage, and that they are able to operate...


  • Doha, Qatar Siemens Full time

    Siemens strongly believes in the value of a Digital Portfolio, hence Smart Infrastructure combines Digital Power Distribution and Digital Building Infrastructure technologies. Our Digital Portfolio will enable our customers to enjoy occupant’s intuitive buildings which are comfortable, safe, secure and energy efficient. Smart infrastructure from Siemens...


  • Doha, Qatar قطر للطاقة Full time

    **Company** QatarEnergy is an integrated national oil corporation that stands at theforefront of efforts for the long term sustainable development,utilization and monetization of oil and gas resources in the State ofQatar. In its efforts to become one of the best national energycompanies in the world, QatarEnergy's activities and those of itssubsidiaries...

  • Senior Commissioning

    4 months ago


    Doha, Qatar Siemens Energy Full time

    **A Snapshot of your day** As a Commissioning/Service Engineer you will work within experienced GIS, CM C&P teams to design, test and deploy complex solutions for transmission operator substations, work with customers to develop innovate solutions, and design new solutions to cater for our future network expansion solutions. The team is responsible to...


  • Doha, Qatar McDermott Full time

    **Company Overview**: People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea...


  • Doha, Qatar McDermott Full time

    **Company Overview**: People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea...


  • Doha, Qatar قطر للطاقة Full time

    **Primary purpose of job** To provide commissioning and start-up technical service all capital projects assigned and provide coordination between project and operation readiness team. To prepare pre-commissioning and commissioning documentation (strategies, plans, procedures, quality, HSE, cost and schedule optimization) and ensure that it is at the full...


  • Doha, Qatar Candidzone Full time

    We are hiring for **Testing & Commissioning Engineer** **Responsibilities**: - Experienced in Testing and Commissioning of process condensate / chemical plants and in commissioning of piping, tanks, and pumps. - Process Commissioning background and brown field experience is must. - Similar experience in GCC is must. - **Location**: Mesaeeid - B.E / B.Tech....


  • Doha, Qatar Drawlines Consult WLL Full time

    Urgent Hiring Testing & Commissioning Engineer (Oil and gas) Minimum 5 years of experience required in this field Duration -6 Months Extendable Location -Doha Should have good knowledge in Testing and Commissioning of process condensate / chemical plants and in commissioning of piping, tanks, and pumps. Process Commissioning background and brown field...


  • Doha, Qatar Candidzone Full time

    Qualification: B.E / B.Tech. (Mechanical / E&I ) Experience : 8-10 years’ experience for Engineer. Duration : 2-3 months - Experienced in Testing and Commissioning of process condensate / chemical plants and in commissioning of piping, tanks, and pumps. - Process Commissioning background and brown field experience is must. - Similar experience in GCC is...


  • Doha, Qatar Winstar Electromechanical Works W.L.L Full time

    Are you an ambitious and dynamic Testing & Commissioning Engineer professional looking to take your career to new heights? Look no further! Winstar, a leading player in the electromechanical services industry for about 20 years, is seeking a passionate T&C Engineer to join our exceptional team. If you are ready to make a mark in the industry and be a part of...


  • Doha, Qatar Sanmar Trading Contracting WLL Full time

    DCS Commissioning Engineer should have experience in Emerson Delta V DCS commissioning Should have QID and ready to join as soon as possible **Job Type**: Temporary Contract length: 10 months Pay: From QAR9,000.00 per month


  • Doha, Qatar DANEM Engineering Works W.L.L Full time

    **Note: short Term Duration 2-3 Months** **Responsibilities** - Design and develop commissioning plans for projects - Oversee the installation, commissioning, and maintenance of systems - Ensure all work is carried out to the highest standard in accordance with project requirements and industry regulations - Coordinate with teams and vendors to ensure...


  • Doha, Qatar GETP Group Full time

    **Testing & Commissioning Engineer** Bachelor of Engineering in Electrical engineering **JOB DESCRIPTIONS & KEY COMPETENCIES**: - To perform all kinds of testing & commissioning work related to the LV & MV switchgear, circuit breakers and relay, HV & EHV Power Transformer. - Experience in Preventive & corrective maintenance of LV & MV switchgear, circuit...

  • Electrical Engineer

    6 months ago


    Doha, Qatar Candidzone Full time

    Electrical Engineer for Pre-Com & Commissioning Work Work location: Ras Laffan Industrial City Package: Salary plus Accommodation and Transportation Duration: 6 months extendable Electrical Engineer with 5-10 years’ working experience in commissioning. Must have experience in water treatment plant /oil and gas construction industry Can join...

  • Electrical Testing

    6 months ago


    Doha, Qatar Star Management Consultancy Full time

    **Roles & Responsibilities** - Testing of all electrical equipment such as Transformers, HV/MV/LV Switchgears including PROTECTION RELAYS. - Testing of all types of Advance Protection Relays, HV/MV Switchgear, MV/LV MCC, Protection Panels, Capacitor Bank, VFD/AFD, Motor and Generator Set. - Get assignment from supervisor and arrange the required test...


  • Doha, Qatar Hot & Cold International Consulting Full time

    Urgent Hiring for a client in Doha, Qatar Testing & Commissioning Engineer **Bachelor of Engineering in Electrical engineering** JOB DESCRIPTIONS & KEY COMPETENCIES**: - To perform all kinds of testing & commissioning work related to the LV & MV switchgear, circuit breakers and relay, HV & EHV Power Transformer. Experience in Preventive & corrective...


  • Doha, Qatar Lanco Overseas HR Consultancy Full time

    Degree in Instrumentation Engineering - Should have minimum 12 - 15 years’ experience in Oil and Gas plant with multi discipline experience in carrying out pre-commissioning, commissioning in operating plants involving RTU, PLC’s, control system, F&G system, Radio tele communication. - Should be capable of preparing commissioning engineering...