Senior Mechanical Engineer

6 months ago


Doha, Qatar Brunel Full time

Responsible for the review of all Maintenance and Spare Parts deliverables related to Mechanical issued by the MIE Projects Contractors,
- Ensure the compliance of Mechanical activities with specifications/standards,
- In charge of the training and monitoring of Mechanical engineers,
- Guarantee the quality of the technical description for all Mechanical spare parts, commissioning/start up, capital and operational ensuring purchase requisition specification and relevant certification are correct.
- Provide assistance to the MIE contractor Work Package leaders with regards to Electrical activities issues.

**About this role**
- HSEQ responsibilities:

- Ensure compliance with Incident Free culture, Health and Safety and Environment policy,
- Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications etc.),
- Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at CTR yard, HSEQ meetings ensuring risks are identified, actions assigned and managed within Project team and Contractors,
- Monitor work activities, especially areas where unsafe acts could occur and ensure that risks have been properly identified and assessed prior to work execution (Job Safety Analysis),
- Ensure that potential failures, weaknesses and hazards are immediately reported.
- During Basic Engineering Phases:

- Ensure that Maintainability aspects, handling requirements and Maintenance access are properly addressed.
- Participate to design reviews as required.
- MIEC General Responsibilities:

- Responsible for the review of all Maintenance and Spare Parts deliverables related to Mechanical issued by the MIE Projects Contractors.
- In charge of the training and monitoring of Mechanical engineers.
- Attend weekly and monthly meetings with MIE Contractors.
- Identify areas of concern, challenge and identify / implement improvement measures.
- Ensure all outstanding Mechanical related actions were managed and closed out within time.
- Provide assistance to the MIE Contractor Mechanical leaders to ensure compliance with project specifications.
- Participate to Maintenance and Spare Parts MIEC workshops with Company Stakeholders to ensure alignment.
- MIEC Technical Responsibilities:

- Review documentation both EPCIC and projects and provide feedback in a timely manner.
- Coordinate and validate the quality and compliance of Mechanical documents required for the completion of Maintenance deliverables in the EDMS.
- Participate to 3D model reviews, ensure that maintainability aspects, maintenance access and handling requirements are properly addressed during Detailed Engineering.
- Contribute to the development of new or updating of Mechanical standards.
- Participation in criticality reviews, RBM studies or equivalent to ensure Mechanical related Maintenance requirements are properly addressed.
- Review and validate the Mechanical Maintenance Work Instructions.
- Guarantee the quality of the technical description for all Mechanical spare parts, commissioning/start up, capital and operational ensuring purchase requisition specification and relevant certification are correct.
- Provide technical clarification for the procurement of Mechanical spare parts as required.
- Participate to the review of the Maintenance dossiers prepared by the MIE Contractors.
- Project Responsibilities:

- Provide support as required to commissioning activities,
- Facilitate efficient communication/information flow with Head of Maintenance and Inspection Engineering, Project team, stakeholders and Maintenance department,
- Attend FAT/SAT as required by project/company.
- Ad-hoc activities as required by line manager,
- All staff must be willing to participate in Crisis Response Training and to assist during Emergency Response Situations if required.

**What you need to bring**
- Bachelor’s degree or equivalent in engineering.
- 8 to 10 years’ experience in the petrochemical, refining, oil & gas exploration & production or similar industry in Mechanical Engineering role.
- Previous experience in the supervision of Maintenance Engineering activities within a project team and/or experience in the use of the Risk Based Maintenance (RBM) or equivalent would be
- beneficial.

**Benefits**
- ** Salary**:

- Day Rate in USD Plus Allowance
- ** Work Schedule**:

- 9 Hours / 6 Days
- ** Duration**:

- 31-MAY-2026, renewable
- ** Location**:

- Qatar

Academic Bachelor



  • Doha, Qatar Vodafone Team Full time

    We are searching for a self-motivated senior mechanical engineer with a proven record of excellent project delivery to lead a number of company projects. Responsibilities will include working alongside other professionals to ensure deadlines are met, liaising with external stakeholders, attending meetings, using CADD software to produce detailed designs,...


  • Doha, Qatar Tadmur Holding WLL Full time

    **Qualifications and Requirements**: - Bachelor’s degree in Mechanical Engineering - Minimum of 8 years of experience in mechanical engineering, with at least 4 years in a senior role within the contracting industry. - Extensive experience with large-scale construction projects, particularly in the commercial, industrial, or infrastructure sectors. -...


  • Doha, Qatar Endangle Engineering Solution Full time

    We are urgently hiring for the below position: 1. Senior Mechanical Engineer Duration: 3 months Location: Qatar (Valid QID required) Qualifications: - Experience in Oil & Gas, Data Centers, and High-Rise Buildings projects - UPDA Engineer Grade A certification - Must have Consultancy and Design experience - Proficiency in mechanical design, CAD, and...


  • Doha, Qatar ( Outsourcing & Recruiter ) Full time

    We are looking for: Senior Engineer Mechanical **Qualifications**: - 15 years of experience Mechanical - Consultancy Experience - Qatar Experience - PWA experience - UPDA A **Job Types**: Temporary, Contract, Permanent Ability to commute/relocate: - Doha: Reliably commute or planning to relocate before starting work (required) **Experience**: -...


  • Doha, Qatar Vistas Global Full time

    Are you a seasoned Mechanical Engineer with a passion for MEP works in construction projects? We're looking for a talented individual to join our team as a Senior MEP Engineer! **Requirements**: - Must have a Bachelors in Mechanical Engineering or higher - Must have minimum 10+ years of experience in MEP works (design and construction) in construction...


  • Doha, Qatar McDermott Full time

    **Job Overview**: The Senior Mechanical Engineer uses best practices and knowledge of internal or external issues to improve the mechanical discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the mechanical discipline. The Senior Mechanical Engineer solves...


  • Doha, Qatar Tadmur Holding WLL Full time

    We are looking for a highly skilled and experienced **Senior Mechanical Procurement Engineer** to manage the procurement process for mechanical systems and equipment within MEP (Mechanical, Electrical, and Plumbing) projects. - **Bachelor's degree in Mechanical Engineering**: - **Minimum of 10years of experience in mechanical procurement within the MEP...


  • Doha, Qatar Arabian MEP Contracting Full time

    **Role Description** 1. Senior Mechanical Engineer is required for Technical Office at site for Grade A - MEP Contracting Company. 2. Good knowledge and experience in Design Review of IFC Drawings. 3. Good knowledge of local, International codes, standards, QCDD guidelines, QCS 2014, PWA Guidelines, NFPA, ASHRAE, IPC, SMACNA & ASME. 4. Should have sound...


  • Doha, Qatar EGEC QATAR Full time

    **Job Summary**: Senior Mechanical Engineer is responsible to supervise the mechanical work based on the Designs & QCS code to get final authority approval & to meet customer expectations. Also carry out extreme attention to detail of designs as specified by design engineer to fulfil the clients need within the specified scope and schedules. **Duties &...


  • Doha, Qatar Candidzone Full time

    We are hiring for **Senior Estimation Engineer (Mechanical) - Oil & Gas industry** **Requirements**: - Required: Bachelor’s degree in mechanical engineering - Preferred: Master’s degree in mechanical engineering - Required: Minimum of 7 years in E&I Estimation Engineering within the Oil & Gas industry (Offshore and Onshore) - Preferred: Experience in...


  • Doha, Qatar McDermott Full time

    **Job Overview**: The Senior Mechanical Engineer (HVAC) uses best practices and knowledge of internal or external issues to improve the mechanical HVAC discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the mechanical discipline. The Senior Mechanical...

  • Mechanical Engineer

    4 months ago


    Doha, Qatar Valerian Trading & Contracting Co. Full time

    **!!! Urgent Requirement !!!** Immediate Hiring **Senior Mechanical Engineer** - Should have 10+ Years of experience. - Should have Consultant experience. - **Should have Building Experience.**: - Should be available for immediate joining - Any nationalities can apply - Must have a bachelors degree in Mechanical Engineering Ability to...

  • Senior Mechanic

    6 months ago


    Doha, Qatar TOP INNOVATION Full time

    *Job Title: Mechanic / Senior Mechanic* *Location: Doha, Qatar* *Company: Top Innovation Garage* *About Us: * Top Innovation Garage specializes in rebuilding 5.7 engines for Japanese, American, and European cars, along with performance modifications and off-road accessories installation. We’re dedicated to delivering top-notch automotive services in...


  • Doha, Qatar MPH Global Services Full time

    Industry: Oil & Gas City/Country: Doha, Qatar Location: Doha Our client company, is urgently looking for "**Senior Mechanical Engineer(Static)"** for their upcoming project in** Doha, Qatar**, willing to work under the following conditions for an upcoming project: - Location: Doha Qatar - Contract duration: 12 months (Renewable) - Working Schedule: Will be...


  • Doha, Qatar MPH Global Services Full time

    Industry: Oil & Gas City/Country: Doha, Qatar Location: Doha Our client company, is urgently looking for "**Senior Mechanical Engineer(Rotating**)**"** for their upcoming project in** Doha, Qatar**, willing to work under the following conditions for an upcoming project: - Location: Doha Qatar - Contract duration: 12 months (Renewable) - Working Schedule:...


  • Doha, Qatar Al Attiyah Architectural Group Holding Full time

    **Key Responsibilities**: **Project Design and Management**: - Lead the design and implementation of mechanical systems for projects, ensuring compliance with industry standards and client requirements. - Manage the overall execution of mechanical engineering projects from concept to completion. **Technical Leadership**: - Provide technical expertise in...


  • Doha, Qatar Al Attiyah Architectural Group Holding Full time

    **Job Title: Senior Mechanical Engineer** **What you will do?** - Design and develop mechanical systems and components in compliance with project requirements and industry standards. - Lead and manage mechanical engineering projects from conception through completion. - Provide technical guidance and mentorship to junior engineers and technicians. - Conduct...


  • Doha, Qatar Duncan & Ross Full time

    **Job Duties** - Carrying out Concept, preliminary and detailed engineering works related to process engineering such as developing PFD, P&ID mass balance, process mechanical calculations such as blower sizing, screen sizing, grit classifiers and process pumps including datasheets. - Carryout design of odor control systems including bio filtration and...


  • Doha, Qatar Duncan & Ross Full time

    **JOB DESCRIPTION**: In this role you will get to **conduct and support the delivery of complete Process mechanical designs for sewage treatment plants and pumping stations.** **What You'll Be Doing**: - Carrying out Concept, preliminary and detailed engineering works related to process engineering such as developing PFD, P&ID mass balance, process...


  • Doha, Qatar Duncan & Ross Full time

    **Responsibilities**: - Leading and carrying out complete Mechanical, HVAC, Plumbing & Firefighting discipline designs to required standards and quality. - Carry out mechanical design for treatment plants and pumping stations to PWA standards and quality as and when assigned by the team lead. - Initiating and developing the concept designs with optioneering...