Senior Process Engineer

3 days ago


Doha, Qatar OilExec Full time

Functional:
Job holder acts as the Expert/Highest technical authority in the area of Process Engineering including line hydraulics, surge analysis and Pump hydraulics. Handle Engineering for the Project long-term FEED, PLANNING and EPC (Detailed engineering, Procurement, Construction, Pre-Commissioning.
RESPONSIBILITIES
1) Act as the main focal point and highest technical authority on Process related activities for FEED /EPC scope development. Be a major contributor on fit-for-purpose concept process engineering definitions, to enable screening and selection.
2) Review and provide input to FEED scope of work. Review Process discipline deliverables and supervise the engineering / construction / EPC contractor’s work for all modification and engineering activities including P&ID development, PFD, Line list, Design basis, material balance, process datasheets, Instrument datasheets, Safety valves, C& E charts, control system description and calculation notes.
3) Carry out feasibility studies and prepare and review related to the project. This includes setting parameters for simulations, reviewing and approving red-lined mark-ups of PFDs, PIDs, data sheets and other relevant deliverables for all modifications from engineering / construction / EPC contractors.
4) Supervise the FEED/engineering/construction/EPC contractor(s)’ work for all related to assigned project drawings review / approval during engineering related projects, ensuring compliance with HSE&S standards and international codes/standards in alignment with company policies and strategies.
5) Interface with contractors’ engineering teams and provide technical guidance and expertise to ensure project requirements are clearly understood and met. Review and approve related technical documents.
6) Prepare and review data sheets/specifications, P&ID, study reports, vendor screening/selections, and technical bid evaluations, and approve or make recommendations to management for approval, as per the Document Distribution Matrix (DDM).
7) Review vendors/subcontractor(s) drawings, calculations, and related documentation to ensure the Process and/or valve engineering aspects meet the required specifications. Comment on and/or approve the relevant documents and follow-up with engineering contractors to ensure the comments are incorporated into the related documentations.
8) Participate in main/critical materials’ Factory Acceptance Testing (FAT) and provide installation and commissioning guidance as required.
9) Coordinate with company quality control, Asset Integrity, Projects and Operations teams to provide specialist engineering support in the project.
10) Participate in costing and preparation of budgets for piping and valve/engineering or related projects. Support to prepare business case studies and techno-economic justifications for high value modification projects.
11) Participate in design reviews, 3D model reviews, technical studies, PID reviews, constructability reviews and PHAs (Process hazard analysis like Hazop, What if, Hazid etc.).
12) Review technical content of Non-Conformance Requests (NCRs), warranty claims, derogation requests and concession requests received from the engineering/EPC/construction contractors and vendors, and provide recommendations for acceptance, acceptance with comments, or rejection of same for management approval.
13) Perform other similar or related duties as required or assigned by the Engineering Manager. Lead development and surveillance of contractor studies to support screening as required. Lead development and surveillance process engineering elements of FEED deliverables on selected concepts from pre-FEED through FEED approval.
QUALIFICATIONS & EXPERIENCE
Minimum Educational Requirements / Qualifications:
Bachelor’s Degree in Chemical Engineering.
Minimum Experience:
15 years’ relevant experience in process engineering within the oil and gas industry or related engineering consultants/EPC contractors.
Skills and Competencies:
Bachelor’s degree (4/5yrs) in Chemical Engineering.
Additional related technical qualifications (PRO-II, PIPESIM, HTRI etc) and Certifications would be an added asset / preferable.
Minimum of 15 years’ experience in process engineering for major projects, with at least 5 years at senior level.
Minimum of 15 years’ experience in process engineering for similar oil/gas production and upstream/downstream processing facilities.
Minimum of 8 years’ experience in gas processing related Projects. Skilled in computer
- MS Office/MS projects & Presentation. Proficiency in International Codes like API, TEMA ASTM, NACE.

**Senior Process Engineer**

**Job Type**: Full Time
Location: Doha, Qatar
Experience: Minimum of 15 years’ experience in process engineering for major projects
Job Category: Engineering Oil and Gas
Posted 36 mins ago



  • Doha, Qatar Wood Plc Full time

    Overview / Responsibilities: Wood has an opportunity for a Senior Process Engineer to join our team in Qatar - Ensure schedule and cost considerations are included in design decisions, while maintaining primary responsibility to assure safe and appropriate quality designs - Ensure Process Engineering activities are executed in alignment with Shell’s...


  • Doha, Qatar MATRIX INCORPORTATED CONTRACTING CO. W.L.L Full time

    Senior Process Engineer IMMEDIATE JOINING - Minimum 10 years’ experience in water and storm water networks + Oil & Gas projects - As a Lead Engineer, execute process engineering design for feasibility, concept, FEED, detailed design or EPC projects. - Bachelor’s Degree in Chemical Engineering - Mandatory - Must be on free visa with valid QID - 10 hrs /...


  • Doha, Qatar Parsons Full time

    Parsons is looking for an amazingly talented **Senior Process Engineer **to join our team! In this role you will get to **Insert one sentence summary of key job role. **What You'll Be Doing**: - Lead the design, modification, and optimization of STP processes and pump stations to ensure compliance with regulatory standards and environmental requirements. -...


  • Doha, Qatar Drawlines Consult WLL Full time

    **DRAWLINES ENGINEERING CONSULTANT** is looking for **Senior Process Engineer** in **Doha, Qatar** **Years of experience**: 8-10 Years **Qualification **:Degree in Chemical Engineering - Minimum 8-10 years’ experience in Process Engineering at the various stages of green-field and brown-field projects from Feasibility Study, Conceptual Design, to FEED,...

  • Senior Engineer

    7 months ago


    Doha, Qatar Friends Human Resources and Consultancy Full time

    **Senior Engineer (Process)** **Location: S**audi **A**rabia **Position Type**: Full-time **Education**:Bachelor’s degree in chemical/ mechanical engineering from an accredited college or university. **Experience**: Over 8 years of experience in process and mechanical design of desalination plant and WWTP. **Description of Responsibility** -...


  • Doha, Qatar Wood Plc Full time

    Overview / Responsibilities: Wood has an opportunity for a** Senior Process Engineer** to join our team in Qatar on a short term contract. This is a key role within the Wood Doha office delivering across study, FEED, EPC and PMC scopes of work. In this role, you will be responsible for the execution of project work in accordance with the project execution...


  • Doha, Qatar Wood Plc Full time

    Overview / Responsibilities: Wood has an opportunity for a **Senior Process Engineer** to join our team in Qatar on a staff basis. This is a key role within the Wood Doha office delivering across study, FEED, EPC and PMC scopes of work. In this role, you will be responsible for the execution of project work in accordance with the project execution plan,...


  • Doha, Qatar Candidzone Full time

    We are hiring for **Senior Process Engineer (Oil and Gas)** **Responsibilities**: - **Bachelor's in Chemical Engineering.**: - 8-10 years in Process Engineering across green-field and brown-field projects - Expertise in design optimization for Oil & Gas, Petrochemicals, Refinery, Waste Water Treatment, Utilities. - Onshore and offshore project...


  • Doha, Qatar MATRIX INCORPORTATED CONTRACTING CO. W.L.L Full time

    Senior Process Designer Bachelor's degree in Engineering is mandatory. Construction Experience in OIL & GAS with EPC Projects background. Min 4 to 5 years of GCC experience as Senior Process Designer. Min 12 years of experience in Total is mandatory. Own visa and Valid QID mandatory Please share CV to 5521 4110 **Job Type**: Temporary


  • Doha, Qatar AcuTech Group, Inc. Full time

    **Who We Are**: AcuTech Group, Inc. is a premier provider of process safety, risk management, chemical security, industrial fire protection engineering, and emergency management services. We have deep expertise in Process Safety Management (PSM), Training, Implementation, Auditing, Process Hazard Analyses (PHA's), Hazard and Operability Studies (HAZOPs),...


  • Doha, Qatar Vistas Global Full time

    We are looking to hire a Senior Process Technician to join our dynamic team. **Experience** - Assist Process Engineers to collect Operational data’s, support process studies to improve GAS Operations. - Accompany the consultants during the site visit surveys. - Draft the drawings and MOM with consultants/CONTRACTORs. - Attend PSSR/RFSU meetings,...


  • Doha, Qatar Duncan & Ross Full time

    **Job Duties** - Carrying out Concept, preliminary and detailed engineering works related to process engineering such as developing PFD, P&ID mass balance, process mechanical calculations such as blower sizing, screen sizing, grit classifiers and process pumps including datasheets. - Carryout design of odor control systems including bio filtration and...


  • Doha, Qatar Duncan & Ross Full time

    **JOB DESCRIPTION**: In this role you will get to **conduct and support the delivery of complete Process mechanical designs for sewage treatment plants and pumping stations.** **What You'll Be Doing**: - Carrying out Concept, preliminary and detailed engineering works related to process engineering such as developing PFD, P&ID mass balance, process...


  • Doha, Qatar Dietsmann Operations & Maintenance Services Full time

    **Main Duties of Senior Process Safety Engineer**: - Provide expertise for the development of AI Management system (AIMS) documentation. This includes developing procedures for SECE (Safety and Environmental Critical Element) management and producing deliverables for technical training program for SECE. - Act as Subject Material Expert (SME) for all aspects...


  • Doha, Qatar McDermott Full time

    **Job Overview**: **Key Tasks and Responsibilities**: - Be fully familiar with the project scope of work, specifications, schedule and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues - Identify changes to scope and promptly raise change notifications,...


  • Doha, Qatar Brunel Full time

    Facilitate process engineering activities for Projects Engineering Support Division to execute key activities ensuring that all activities comply with standardized processes and are delivered to the highest standards; - Reports to Head of Projects Engineering Support; - Internal: Frequent interaction with Heads in Engineering & Projects Groups, Operations,...


  • Doha, Qatar NES FIRCROFT Full time

    Ensure safe, timely and on-budget completion of assigned tasks / projects. Ensure that all work is carried out in a professional manner and in compliance with NOC values, policies, specifications and procedures. Ensure that best (process) engineering practices, lessons learnt and know-how are employed in carrying out all activities. Assume Technical...


  • Doha, Qatar Brunel Full time

    Brunel is a global provider of flexible workforce solutions and expertise, connecting specialists with clients across the globe. We deliver innovative services like Recruitment (people, talent, and training), Logistics (global mobility and travel), Technical Services (project support and setup) and Consultancy to our clients both globally and...


  • Doha, Qatar Technip Energies Full time

    **About Us** At Technip Energies, we believe in a better tomorrow and we believe we can make tomorrow better. With approximately 15,000 talented women and men, we are a global and leading engineering and technology company, with a clear vision to accelerate the energy transition. Designing and delivering added value energy solutions is what we do. If you...


  • Doha, Qatar McDermott Full time

    **Company Overview**: People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea...