Design Engineer

7 months ago

Doha, Qatar Swan Global WLL Full time

**Design Engineer - Cybersecurity**

Location Doha

Duty Hours: 10 Hrs / 6 days

**Project Duration :6 Months**
- Engineer, implement, and monitor security measures for the protection of ICS systems or SIS systems, related networks, and information, while identifying and defining system security requirements.
- Design ICS systems security architecture and develop detailed cybersecurity designs adhering to standard blueprints and best design practices.
- Engage in the entire software/system lifecycle, encompassing design, documentation, installation, configuration, and testing.
- Manage System Backup technologies like Acronis & other providers, including installation and deployment.
- Deploy and Manage End Point Security & Application Control Solutions from McAfee & other providers, as well as SIEM solutions like McAfee, Splunk, Q-radar, & other providers.
- Implement and manage network-based firewalls (e.g., Fortinet, Palo Alto, CISCO, SonicWALL, Siemens, etc.), network troubleshooting, and intrusion detection products.
- Install and manage Network Management Solutions.
- Conduct firmware updates for various Automation Control Systems, Switches, Firewalls, etc.
- Configure and deploy Domain Controller settings and policies to defined computer groups.
- Implement host-based security technologies such as Antivirus, Data Leakage Prevention, Host IPS, Whitelisting, and Anomaly Detection.
- Perform installation, configuration, and testing activities at both factory (manufacturing facility) and customer sites, with experience in Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT).
- Prepare comprehensive system documentation including Functional Design Specifications, Backup Systems documentation, Firewall configurations, Network Diagrams, System Architectures, Asset Inventory, FAT and SAT procedures, and Operation & Maintenance manuals.
- Cyber Security FDS Document preparation
- Cyber Security FAT Procedure and Report Document preparation
- Cyber Security SAT Procedure and Report Document preparation
- Switch Management including time synchronization.
- Network Segregation, VLAN Configuration etc.
- Firewalls Management including time synchronization.
- "Configurations and Management of Domain Controllers - Secondary & Primary Redundant DC
- Group, User & Policy Setup"
- Application Whitelisting, Device Control, Host Intrusion Protection
- Inventory Management and Security Audit Compliance
- User Logins, Security Hardening, Network Hardening, USB Port Blockers
- NIDS Configuration
- NAS Server Configuration
- Disaster Recovery Configuration
- Hypervisor Host machine Setup and Configurations
- NMS Configuration - Accumulation of all network nodes and their respective management
- Backup Server Configuration
- WSUS Setup
- ePOs Server and Anti Virus Setup on all servers and workstations
- PCS Management Console
- Redundant Data Diode Configuration
- SIEM Server and SIEM Log Server configurations

**Education and Certifications**:

- Bachelor’s degree in engineering (Electrical Engineering, Computer Engineering, or related field). A degree in Cybersecurity is preferred.
- Valid certification in OT security (e.g., CISSP, GICSP, OSCP) are highly desirable.

**Professional Experience**:

- Minimum of 5 years as Design/Site Engineer with experience in IT/OT security, with Proven experience in ICS Systems and Cybersecurity, with a focus on OT security.
- Knowledge of Oil & Gas engineering practices, applicable specifications, codes, and international standards.
- Familiarity with the Oil and Gas industry and its specific cybersecurity challenges.
- Demonstrated experience in executing sizable EPC jobs for brownfield Oil and Gas projects.
- Ability to manage multiple priorities in a dynamic environment.
- 5 years professional experience in large EPC projects
- 3 years professional experience in design, engineering, and site execution.

**Key Skills and knowledge**:

- VxRail Clusters and other Virtualization Platforms and Management Client/Consoles.
- Backup Systems, Patch Management, Data diodes, and Workstations.
- Domain Controller, PDC/RADIUS Server.
- Endpoint protection solutions including McAfee Complete Endpoint Protection, Protect PLUS Business Software, McAfee MOVE Antivirus for Virtual Servers, and McAfee Application Control for Servers Protect PLUS Business.
- SIEM (Security Information and Event Management) solutions.
- One-Way Data Diodes for Industrial Control Systems (ICS) with hands-on experience for ICS OWL software.
- IDS Physical Appliance based on Nozomi Guardian / Dragos or similar solution providers.
- Network-based firewalls.

**Job Types**: Full-time, Contract
Contract length: 6 months

Pay: QAR12,300.00 per month

Application Question(s):

- Visa Type ( Company Visa/ Family Visa/ Freelance Visa]
- How Many years of Oil & Gas Experience
- Current Salary
- Expected Salary

  • Mechanical Design Engineer

    7 months ago

    Doha, Qatar Universal Design Center Full time

    Company Overview: We are a leading engineering firm in Qatar, dedicated to providing innovative and cutting-edge solutions to our clients' mechanical design needs. As we continue to expand our operations, we are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. Position Summary: **Responsibilities**: Collaborate with...

  • Structural Design Engineer

    2 months ago

    Doha, Qatar Universal Design Center Full time

    Structural Design Engineering with Experience of 5 + Years. Education : Bachelors/3-5 yr Degree Employment Type : Full Time Employee Location : Qatar. - _Detailed structural design of buildings/structures _ - _Produce design drawings, calculations reports and specifications._ - _Proficient in utilizing standard engineering principles, techniques and...

  • Architectural Design Engineer

    3 days ago

    Doha, Qatar Universal Design Center Full time

    We are currently seeking an experienced and talented Architectural Design Engineer to join our dynamic team in Qatar. As an Architectural Design Engineer, you will play a crucial role in designing and developing innovative architectural solutions that adhere to the highest engineering standards and codes in Qatar. **Responsibilities**: Lead and contribute...

  • Female Architectural Design Engineer

    2 months ago

    Doha, Qatar Universal Design Center Full time

    We are currently seeking an 2 years experienced and talented Architectural Design Engineer to join our dynamic team in Qatar. As an Architectural Design Engineer, you will play a crucial role in designing and developing innovative architectural solutions that adhere to the highest engineering standards and codes in Qatar. **Responsibilities**: Lead and...

  • Architecture Engineer

    6 months ago

    Doha, Qatar Qatari Home Design & Engineering Consultancy Full time

    Our Company “Qatari Home Design & Engineering Consultancy” is hiring for the following position: 1. Architecture Engineer (Designer) - Major in Architecture Engineering. Note: Salary is negotiable as per experience. Thank you Ability to commute/relocate: - Doha: Reliably commute or planning to relocate before starting work...

  • Architect & Interior Designer

    5 months ago

    Doha, Qatar Design Kingdom Full time

    We are Engineering company located in Doha we are looking for Architects and Interior designers Must have experience in 2D & 3D software Pay: From QAR3,000.00 per month

  • Structural Design Engineer

    7 months ago

    Doha, Qatar Al-kashaf international design & consultant office Full time

    Required for a Consulting Office - Grade A: Structural design engineer - 7+ years' experience in GCC - UPDA grade (any) - Previous experience in consulting offices (not Contracting Co.) - Valid Qatari residency - Previous experience in various projects (hotels, high-rise buildings, mixed-use developments, commercial/residential towers, clubs, schools, malls,...

  • Hvac Design Engineer

    7 months ago

    Doha, Qatar Al-kashaf international design & consultant office Full time

    Required for a Consulting Office - Grade A: HVAC Design Engineer - 7+ years' experience in GCC - UPDA grade (any) - Previous experience in consulting offices (not Contracting Co.) - Valid Qatari residency - Previous experience in various projects (hotels, high-rise buildings, mixed-use developments, commercial/residential towers, clubs, schools, malls,...

  • Design Architect Engineer

    3 weeks ago

    Doha, Qatar AL-KASHAF International for Design & Engineering Consultant Office Full time

    **Classification UPDA: A** **Experience: Min. 10 years** **Have experience in Consulting Office** **Previous experience in various projects**: **(hotels, high-rise buildings, mixed-use developments, commercial/residential towers, clubs, schools, malls, hospitals & Fit-Out projects)** **Available for immediate joining** We are looking for a...

  • Hvac Design Engineer

    3 months ago

    Doha, Qatar Al-kashaf international design & consultant office Full time

    Required for a Consulting Office - Grade A: HVAC Design Engineer - 4+ years' experience in GCC - UPDA grade (any) - Arabian Nationality - Previous experience in consulting offices or Contracting Co. - Valid Qatari residency - Previous experience in various projects (hotels, high-rise buildings, mixed-use developments, commercial/residential towers, clubs,...

  • Architecture Design Engineer

    7 months ago

    Doha, Qatar Al-kashaf international design & consultant office Full time

    Required for a Consulting Office - Grade A: Architecture Design Engineer - 4+ years' experience in GCC **- Previous experience in consulting offices** - Valid Qatari residency Plz. send your updated CV to WhatsApp: +97470514921 Application Question(s): - Do you have Arab nationality? **Education**: - Bachelor's (preferred) **Experience**: - Previous...

  • Electrical Engineer

    2 months ago

    Doha, Qatar Universal Design Center Full time

    We are currently seeking an experienced and talented Electrical Engineer with UPDA Grade A and specialized in design to join our dynamic team in Qatar. As an Design Engineer, you will play a crucial role in designing and developing innovative Electrical solutions that adhere to the highest engineering standards and codes in Qatar. Ability to...

  • Electrical Engineer

    1 month ago

    Doha, Qatar Universal Design Center Full time

    We are currently seeking an experienced and talented Electrical Engineer with UPDA certified and specialized in design to join our dynamic team in Qatar. As an Design Engineer, you will play a crucial role in designing and developing innovative Electrical solutions that adhere to the highest engineering standards and codes in Qatar. Ability to...

  • Hvac Design Mechanical Engineer

    2 weeks ago

    Doha, Qatar AL-KASHAF International for Design & Engineering Consultant Office Full time

    HVAC design engineers perform heating and cooling load calculations and determine airflow requirements, identifying the sizes of air handling units, or chillers and boilers. In new construction, they interpret plans and blueprints and design ductwork and piping systems. Classification UPDA: A - B - C - T Experience: Min. 5 years Have experience in...

  • Fit Out Engineer, Project Manager&site Supervisor

    2 months ago

    Doha, Qatar BOTTEGA DESIGN Full time

    BOTTEGA DESIGN IS LOOKING FOR FIT OUT ENGINEER WITH MIN OF 5 YEARS EXPERIENCE IN SITE SUPERVISION, PROJECT MANAGEMENT. Тип вакансии: Полная занятость

  • Electrical Engineer

    7 months ago

    Doha, Qatar Total Design Technology Full time

    **Key Responsibilities**: - Conduct design, calculations, and engineering tasks related to generators, UPS systems, and solar energy solutions. - Manage tender processes, including bid preparation and submission. - Prepare documents for project proposals and submissions. - Respond to sales inquiries and generate quotations based on customer requirements. -...

  • Design Engineer

    2 weeks ago

    Doha, Qatar MATRIX INCORPORATED W.L.L Full time

    To Prepare LLD and As-built drawings as per site status. - Design site plans for updating fiber cable routes. - Understanding site survey reports and single drawing to create new or update existing designs using various software platforms (Auto CAD / ArcGIS / Google Earth). - Preparing Splice Diagrams & SLD for Fiber network routes. - Organized and maintain...

  • Design Engineer

    3 weeks ago

    Doha, Qatar NAFFCO Qatar Full time

    Design and develop fire protection systems, including sprinkler systems, fire alarms, and suppression systems. Perform hydraulic calculations and prepare technical drawings using tools like AutoCAD and Revit. Ensure compliance with international fire safety codes (NFPA) and obtain regulatory approvals. Collaborate with architects, contractors, and project...

  • Design Engineer

    7 months ago

    Doha, Qatar Star Management Consultancy Full time

    WhatsApp: 5014 7023 **Responsibilities**: - Craft models and drawings of products using CAD - Analyze prototype data and retest if needed - Research new product ideas and methods - Improve existing products and processes - Ensure compliance with the industry’s safety standards - Maintain accurate records - Ensure products are user - and...

  • Civil Engineering with Upda Grade A

    5 months ago

    Doha, Qatar JMT DESIGN & BUILD Full time

    Civil Engineering Designer UPDA Certified (grade A,B or C not training) 5 years experience with Qatari Driving License Can join immediately **Job Types**: Full-time, Contract Contract length: 24 months Pay: QAR7,000.00 - QAR11,000.00 per month