Qc Coating

**COATING/ QC INSPECTOR** **Eligibility Criteria**: Minimum 5 years of verified experience in oil and gas industry in similar capacity and shall possess NACE-II, B GAS level 2, FROSIO, I Corrlevel-2 or equivalent. **QUALIFICATION**:Diploma/ Degree/ BSc - Mechanical Engineering **LOCATION**: QATAR **JOINING**: 15 SEPT 2024 **SALARY**:5000 -5500 QAR...

Urgent Hiring!!! We are looking for a QC painting and coating inspector. please see the requirements below; - **Requirements**:_ - should have Knowledge of NACE, BS, SSPC, TWI, and codes relevant to the scope of work - Should have CIP level 2 or above CSWIP grade 2 - Experience: Minimum 10-15 years as inspector or lead inspector **Experience**: - QC...

**Immediate Hiring !** **QC SUPERVISOR (PAINTING/COATING - BGAS-CSWIP Grade 2)** - Minimum Requirement Painting / Coating_ - Should have Engineering Diploma or Degree. - QC Supervisor (Painting/Coating) should have valid certificate BGAS - CSWIP Grade 2, CIP Level 2 or above. - Should have Oil & Gas Experience. At least 10 years’ experience required....

**Amplitude Industrial Services Qatar** is a Branch of Amplitude Industrial Services Jubail, we have been in Jubail (Saudi Arabia) for the past 15 years and have achieved many milestones. **we currently have 6,000 Employees strength in Jubail (Saudi Arabia)** making us the leading Manpower company in and around Jubail. For an upcoming oil and gas project in...

**About this role** - To ensure that painting, coating, thermal insulation and passive fire protection, quality requirements are well established and implemented by the Contractor during fabrication and construction works in order to obtain formal guarantee and warranties of each paint system.o To supervise and inspect all painting and coating quality...

**Responsibilities**: Inspect coating processes, verify materials, and ensure compliance with project specifications. Perform visual and instrument-based inspections, identifying defects and corrective actions. Maintain detailed inspection reports and ensure safety and environmental regulations are met. **Requirements**: Minimum 5 years of experience in...

**Coating / Painting Inspector** **Education**: Degree/Diploma in Mechanical Engineering **Mandatory Certification** BGAS Level-2 Certified Coating Inspector or NACE CIP Level - 2 **Responsibilities**: - Inspect coatings applied to surfaces, such as pipelines, tanks, bridges, and buildings, according to industry standards and client requirements. -...

**DRAWLINES ENGINEERING CONSULT**is looking for **QC Fireproof**in **Doha-Qatar** **Project Duration**: 10 Months+ **Project Site Location**: Messaied **Responsibilities**: - The surface of the steel structure needs to be sprayed with fireproof coating, and the coating needs to be supported by steel wire mesh. - **Minimum 5 years of experience in the...

Brunel is a global provider of flexible workforce solutions and expertise, **connecting specialists **with clients across the globe. We deliver innovative services like Recruitment (people, talent, and training), Logistics (global mobility and travel), Technical Services (project support and setup) and Consultancy to our clients both globally and...

Brunel is a global provider of flexible workforce solutions and expertise, **connecting specialists **with clients across the globe. We deliver innovative services like Recruitment (people, talent, and training), Logistics (global mobility and travel), Technical Services (project support and setup) and Consultancy to our clients both globally and...

**1. QA/QC Welding Inspector** **2. QA/QC Mechanical Engineer** **3. QA/QC Coating Inspector** **4. QA/QC E&I Inspector** **Qualification**: - Bachelor’s degree in engineering or higher educational qualification in engineering - Must have Registered Auditor with IRCA, RABQSA or equivalent. Welding inspection qualification (CSWIP3.1, AWS-CWI or IWE) or...

**1. QA/QC Welding Inspector** **2. QA/QC Mechanical Engineer** **3. QA/QC Coating Inspector** **4. QA/QC E&I Inspector** **Qualification**: - Bachelor’s degree in engineering or higher educational qualification in engineering - Must have Registered Auditor with IRCA, RABQSA or equivalent. Welding inspection qualification (CSWIP3.1, AWS-CWI or IWE) or...

**About this role** - Promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities; - Carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices; - Follow-up of engineering...

Kintec Recruitment Limited is looking for a qualified QC Inspector to provide high-quality assurance for a major oil and gas project in Qatar.The successful candidate will be responsible for implementing quality procedures and inspection plans for coating activities throughout fabrication, construction, and installation phases.They will verify that...

Painting / coating inspection of steel structural works Nase Level 2 or B - GAS Certificate is mandatory - Responsible for stage wise painting / coating inspection. - Prepare “inspection & test plan” (ITP) for specific project / company requirements/ surfacepreparation and painting / coating procedure - Hot dip galvanizing coating inspection in...

AccountabilitiesEnsure Engineering Dossier are delivered with a robust coating engineering definition and fit for purpose design that can be procured, fabricated, transported, installed, and operated safely, meeting the requirements of the organization's standard, project basis of design, and SOR.Ensure assigned project tasks are well managed in accordance...

Job OverviewCegelec Qatar is currently seeking a highly experienced Welding and Coating Inspector Specialist to join our team. As a key member of our quality department, you will be responsible for ensuring the quality and compliance of welding and coating processes throughout the construction phase.Your primary focus will be on conducting inspections,...

Industry: Oil & Gas City/Country: Doha, Qatar Location: Qatar International Oil & Gas Company is looking for a **CPP TOPSIDE QC Painting Supervisor** **Location: Doha/Korea** **Status: Single** **Contract: 1 year** **Qualifications & Experience Required** - Education to HND/BTS level or COMPANY approved equivalent in engineering discipline. - Painting and...

Position: Coating & Insulation Inspector Department / Division: Coating and Insulation / MSD Reports to: Coating & Insulation Manager Duties & Responsibilities: - Perform Inspection activities in accordance with requirement of the relevant Inspection & Test Plan. - Monitoring the work and co-ordinate all the Inspection activities with Client Inspector &...

Job Title: QC Inspector Contract Duration - 3 Month Extendable Job Summary: Ensure knowledge of preparation of ITP, MST, MAR, Quality Control plan. Ensure adequate knowledge of ASTM, ISO, BN standard required for Fabrication Industry. Prior to the commencement of works, review & understand the relevant project specification & drawing. Be well-versed in the...