CPP Offshore Electrical/Instrumentation Supervisor

2 weeks ago


Doha, Baladīyat ad Dawḩah, Qatar Asterix Communications Full time

Job Responsibilities:
  1. To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities.
  2. To carry out work in compliance with the COMPANY values and policies, relevant laws and regulations, agreed the COMPANY priorities and objectives, C standards and procedures and good industry practices.
  3. Follow and assist CSR during work preparation for all phases in BF and HU works within his/her responsibility.
  4. Review CTR construction engineering documents and assist Project construction engineer for validation of the documents HSE Management System.
  5. Participate in CONTRACTOR site visit or another visit offshore if required by preparation.
  6. Propose and encourage design optimization to minimize the offshore works.
  7. Follow up with FOPS the outstanding points in regard to the existing facilities.
  8. Material and construction equipment list preparation and validation including its mobilization plan.
  9. Review and monitor the availability of drawings, job instructions, material deliveries, and tools.
  10. Review all Method Statements from CTR within his/her field of competence.
  11. Ensure equipment installation as per Approved for Construction (AFC) project drawings, specifications, procedures, and Site Instructions.
  12. Supervise the installation of all bulk and support associated with its discipline.
  13. Supervise the workmanship for cables installation and glanding.
  14. Report to E&I Superintendent for monitoring construction progress.
  15. Responsible for monitoring contractor's labor resources in accordance with the approved mobilization plan and report to E&I Superintendent.
  16. Ensure the correct implementation of the Permit to Work system.
  17. Ensure Contractors personnel have sufficient training and experience to carry out safe operations.
  18. Identification of any Non-Conformance linked to Fabrication (NCRs).
  19. Review manufacturing records books.
  20. Coordinate with Commissioning Team during the pre-commissioning phase in close relation with the Pre-commissioning Superintendent.
  21. To verify the completeness and correctness of the construction drawings and ensure the complete handover to the Commissioning team.
Desired Candidate Profile:

Profile: Have an Associate's or BS degree in a technical field or extensive natural gas/oil industry experience.

Professional Experience (number of years): 15.

Experience within project (number of years): 10.

Education: Any Graduation()

Gender: nm

Nationality: Any Nationality

Requirements:
  • Have strong working knowledge of construction contracts, contractor inspection procedures, and construction work sequences for jackets.
  • A good knowledge of COMPANY standard, TOTAL General Specifications (GS), and International codes/standards.
  • Conversant with General Arrangement (GA) engineering and structural drawings including building marking plans, also with tubing isometrics and P&IDs.
  • English fluent.
  • The ability to work in a team-oriented, collaborative environment is essential.
  • Good leadership skills and good communication skills.
  • Ability to work on projects in a complex and multicultural environment.
  • Skilled in using computer programs for word processing, spreadsheets, and e-mail communications.
  • Familiar with ICAPs software.

#J-18808-Ljbffr

  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Korea / Doha, QatarLocation: DohaWe are recruiting for CPP INS Supervisor for one of our Clients in Doha, Qatar.Industry: Oil and GasTerms & Condition:Work Location: Doha/ KoreaDuration: Feb Dec 2024ACCOUNTABILITIES To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities, To...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaLooking for a CPP Electrical Engineer to work in Doha/ India/Vietnam/Malaysia/Oman/China/Korea/ Singapore.Start date: 1- Oct- 2023End date: 30- Sept -2025Location: Doha/ India/Vietnam/Malaysia/Oman/China/Korea/ SingaporeContract duration: 2 yearsQualifications and experience required: Qualification:...

  • Instrument Supervisor

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar MPH Full time

    To promote & comply withapplicable safety instructions and other COMPANY HSE procedures inall activities, To carry out work in compliance withCOMPANY values and policies, relevant laws, and regulations, agreedCOMPANY priorities and objectives, COMPANY standards and proceduresand good industry practices, Review and monitor theavailability of drawings, job...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Category: MechanicalIndustry: Oil & GasCity/Country: Doha, QatarLocation: DohaPosition: CPP Preservation Mechanical SupervisorStart date:01-JUL-2023End date:31-JUL-2024Location:Doha/KoreaActivities: To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities, To carry out work in compliance with COMPANY values...

  • Instrument Supervisor

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar MPH Full time

    To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities, To carry out work in compliance with COMPANY values and policies, relevant laws, and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices, Review and monitor the availability of...

  • Cpp Ele Supervisor

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar NES FIRCROFT Full time

    BH-238506Posted: 27/06/2023 Competitive Qatar Doha Contract Oil & GasQualification: Bachelor's degree or equivalent in engineering,- Valid CompEx Training Certificate covering Module EX-01/02/03/04.: Professional Experience in the offshore oil & gas project (number of years): 10 Experience within project: (number of years): Experience and knowledge in...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for a CPP Electrical Engineer for one of our clients with the following details:Location: Doha AND KoreaStart Date: Jul 2024End Date: Jun 2026Work Status: Resident, SingleQualification and Experience Required: Qualification: Engineering degree in Electrical engineering. Experience:...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaOur client, world's largest LNG company, is urgently looking for a "CPP Mechanical Package Supervisor" willing to work under the following conditions for an upcoming project:Terms and Conditions WorkLocation: Doha / Korea Mobilization date: 1Jan2023 Demobilization date: 31May2024 Status: SingleWith...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Category: HSE / SafetyIndustry: Oil & GasCity/Country: Doha/Korea, QatarLocation: DohaOne of our top Clients in the O&G Industry is looking for a Gallaf - Batch 3 CPP TOPSIDE Architectural & HVAC Supervisor with the following details:Location:Doha/KoreaContract Duration:FEB DEC-2024Gallaf - Batch 3 CPP TOPSIDE Architectural & HVAC Supervisor is in charge...


  • Doha, Baladīyat ad Dawḩah, Qatar SPIE Full time

    Filiale internationale du groupe SPIE spécialisée dans le domaine de l'énergie, SPIE Oil & Gas Services travaille au cœur des infrastructures de production d'énergie depuis plusieurs décennies pour les concevoir, les installer, les démarrer et les entretenir, le tout dans les meilleures conditions de sécurité, qualité, coûts et délais.Avec près...


  • Doha, Baladīyat ad Dawḩah, Qatar Technip Energies Full time

    Preparation and checking of Instrument drawings- Instrument cable block diagram, Instrument Location layout drawing, Control room Layout drawing, Instrument wiring diagram, Loop Diagram, Instrument Hook-up Diagram, MCT drawing, Cable routing and trench layout drawings, Bill Of Materials, Instrument Earthing Diagram, System Architecture diagram, Cause &...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Consulting Services Full time

    We are looking for a CPP Mechanical Package Superintendent with the following details :Start Date : AUG 2024End Date : MAR 2025Location: Doha / Offshore / Korea ( All locations )Work Status : Resident, Single QUALIFICATIONS & EXPERIENCE REQUIREDEducation to HND/BTS level or COMPANY approved equivalent in engineering discipline.Professional Experience (number...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Category: Oil and GasIndustry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for a CPP Mechanical Package Superintendent with the following details:Start Date : AUG 2024End Date : MAR 2025Location: Doha / Offshore / Korea ( All locations )Work Status : Resident, SingleQUALIFICATIONS & EXPERIENCE REQUIRED Education to HND/BTS level or COMPANY...


  • Doha, Baladīyat ad Dawḩah, Qatar Shenzhen Max-well Oilfield Services Ltd. Full time

    Offshore Drilling Supervisor (Level 2)Job Title: Offshore Drilling Supervisor (Level 2)Experience level: ExperiencedLocation: North America, Africa, Asia, or areas designated by Party ALanguage: English fluent level As the site representative of Party A, exercise the right of supervision of Party A's operations on behalf of Party A, supervise the health,...


  • Doha, Baladīyat ad Dawḩah, Qatar Energy Jobline Full time

    Process Control or Electric and Instrumentation (E&I) Technician Specific Skills Must have demonstrated mechanical/electrical knowledge to analyse and solve problems on various process instrumentation and switchgear.Must be able to inspect used parts to determine changes in performance using VOM, oscilloscope, signal generator, rules, callipers, multimeter,...


  • Doha, Baladīyat ad Dawḩah, Qatar Energy Jobline Full time

    Process Control orElectric and Instrumentation (E&I) Technician SpecificSkills Musthave demonstrated mechanical/electrical knowledge to analyse andsolve problems on various process instrumentation andswitchgear.Must be able to inspect used partsto determine changes in performance using VOM, oscilloscope, signalgenerator, rules, callipers, multimeter, feeler...


  • Doha, Baladīyat ad Dawḩah, Qatar Enermech Full time

    New Opportunity 28/28 rotation Competitive RateWe are?A leading specialist engineering services company delivering integrated solutions for complex energy and infrastructure projects and operating assets. Our business is built on the belief that our people are what make EnerMech excellent. When we are thriving globally it's not just about investing in our...


  • Doha, Baladīyat ad Dawḩah, Qatar PPL Dynamics Full time

    Sell technical products and services related to mechanical, instrumentation, and electrical engineering in the offshore oil and gas sector. Provide technical support to clients, develop new business opportunities, and maintain customer relationshipsPromote and sell technical products and services specific to the offshore oil and gas industry. Develop and...


  • Doha, Baladīyat ad Dawḩah, Qatar قطر للطاقة Full time

    Primary purpose of jobResponsible, accountable for the day-to-day Construction/execution of Electrical and Instrumentation aspects of BH LifeExtension Project to ensure they are constructed in accordance with approved Scope of Work, approved drawings,engineering design and safety, environment and QatarEnergy standards & specifications.Act as an interface...


  • Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Doha Full time

    Implementation of QC activities for Electrical and Instrumentation works in site. Review Inspection & Test Plans, Checklist and RFI. Material Receiving Inspection and check the installation of Electrical equipment and Instruments are as per correct hook-up drawings and verifying red-line mark-up as necessary. Experience in HV/LV cable laying standards,...