CPP MIEC Lead

2 weeks ago


Doha, Baladīyat ad Dawḩah, Qatar Oil and Gas Job Search Ltd Full time
  • The purpose of the Job is to guarantee the proper preparation and execution of one MIE Project.
    As such, the job holder is accountable:
    • To ensure the proper preparation and execution of the Maintenance and Inspection Engineering (MIE) Project up to handover of MIEC deliverables to department.
    • To ensure follow-up of Maintenance Engineering activities in line with Maintenance & Inspection Engineering Contract (MIEC).
    • To ensure compliance of MIEC activities with the COMPANY specifications/standards and local legislation.
    • To guarantee that all the Maintainable and Inspectable equipment covered by the MIE Project are properly addressed.
    • For following-up the selection, supply chain and inspection of all Project operating spare parts and specific tools,
    • To ensure all the Project templates are uploaded for the platforms First Oil.
    • To guarantee that all the relevant spare parts are available in the warehouse for the platforms First Oil.
    • To co-ordinate Project MIEC activities in collaboration with MIE Contractor, the COMPANY Maintenance.
    • Department and Head of Maintenance and Inspection Engineering.
    • To act as interim Head of Maintenance and Inspection Engineering during his vacation and mission periods.
    • To follow-up the COMPANY method team clarifications requests on completed MIE Project.
  • HSEQ responsibilities:
    • Ensure compliance with the COMPANY Incident Free culture, Health and Safety and Environment Policy,
    • Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures, and specifications etc.),
    • Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at CTR yard, HSEQ meetings ensuring risks are identified, actions assigned and managed within Project team and Contractors,
    • Monitor work activities, especially areas where unsafe acts could occur and ensure that risks have been properly identified and assessed prior to work execution (Job Safety Analysis),
    • Ensure that potential failures, weaknesses, and hazards are immediately reported,
  • During Basic Engineering Phases:
    • Responsible for the preparation of Scope of Work (SOW) for the MIEC contract and assist with CFT preparation along with Field Operations Maintenance Engineering Team,
    • Ensure that all Maintenance and Inspection aspects are captured in the EPCIC contract CFT,
    • Review technical bids, prepare clarifications, and facilitate clarification meetings capturing comments of Bidders,
    • Prepare answers to Bidders technical clarifications,
    • Develop evaluation matrix and critique each bidder based on technical content and proposed personnel / organization,
    • Support the cost reduction initiative with providing C&P the requirements to challenge tenders bid, reducing the cost of the Contract,
  • MIEC General Responsibilities:
    • Approve the review of all technical deliverables issued by the MIE Project Contractor,
    • Lead the review of all contractual deliverables issued by the MIE Project Contractor,
    • Manage Project weekly and monthly meetings, following progress, taking decisions, and ensuring actions are closed out without delaying the Project,
    • Validate the Project Work Time Schedule update,
    • Review the progress measurement figures established by MIE contractor,
    • Challenge Project MIE Contractor for late delivery and any potential requirement for change orders,
    • Participate in MIEC workshops with Company Stakeholders to ensure alignment,
    • Manage quarterly REX with MIE Contractor, ensuring any lessons learnt are captured in REX register for implementation into future MIECs,
    • Participate to the Project Quality Review Audits and ensured any outcomes are captured, actioned and closed out,
  • MIEC Technical Responsibilities:
    • Responsible for developing new or updating existing M&I philosophies and strategies +spare parts recommendation strategy,
    • Accountable for Project MIE activities ensuring that schedule meets EPCIC and Company milestones and readiness for start-up with emphasis being on operating and capital spare part selection process and procurement, including inspection, shipment, delivery, and storage/preservation,
    • Accountable for the quality of the technical description for all spare parts.
    • Commissioning/start up, Capital and operational ensuring purchase requisition specification and relevant certification are correct,
    • Ensure the mass loading of PM data into the CMIMS and adequacy of deliverables for spare parts (capital / operational) and consumables as require ,
    • Contribute to MIE contract final report and REX at the end of the project,
    • Responsible for Project handover to Field Operations Team for Maintenance and Inspection.
  • Project Responsibilities:
    • Manage Project as directed by Head of Maintenance and Inspection Engineering,
    • Manage project start-up,
    • Provide support as required to commissioning activities,
    • Facilitate efficient communication/information flow with Head of Maintenance and Inspection Engineering, Project team, stakeholders, and the COMPANY Maintenance department,
    • Contribute to the identification of training requirements regarding installed equipment and where required contribute to the arrangement of training with vendors for COMPANY personnel,
    • Contribute to the identification of new specific maintenance contracts to be used by operations for new equipment, write SOW and prepare for Call for Tender (CFT),
    • Ad-hoc activities as required by line manager,
    • All staff must be willing to participate in Crisis Response Training and to assist during Emergency Response Situations if required.
  • Bachelor's degree or equivalent in engineering.
  • Senior Maintenance or Inspection Engineer with at least 10 years of Oil and Gas experience including Operations experience.
  • Previous experience in the supervision of Maintenance and Inspection projects and or engineering
  • activities are required.
  • Leadership skills and good communication skills,
  • Good analytical skills,
  • Ability to work on projects in a complex and multicultural environment,
  • Experience with CMIMS,
  • Familiar with COMPANY standards, MANASA and relevant codes and standards,
  • Fluent in English (listening, writing, and speaking) and its technical vocabulary,
  • Computer literate,
  • Available for missions as necessitated by project,
  • Medically fit to travel to Offshore Oil & Gas Platforms,
  • H2S OPITO and T-BOSIET training.
  • Salary:
    • Day Rate in USD Plus Allowance
  • Work Schedule:
    • 9 Hours / 6 Days
  • Duration:
    • 31-July-2026, renewable
  • Location:
    • Qatar
A powerful global network, connecting the most talented and experienced specialists with both present-day and pioneering projects. With 120+ offices and more than 12,000 specialists around the world, we deliver skilled talent and workforce services that transform global projects in Conventional Energy, Infrastructure, Renewable Energy, Life Sciences, Future Mobility and Mining.
#J-18808-Ljbffr
  • CPP MIEC Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar Brunel GmbH Full time

    HSEQ responsibilities:Ensure compliance with the COMPANY Incident Free culture, Health and Safety and Environment Policy,Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures, and specifications etc.),Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at...

  • Miec Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaPosition: MIEC LeadLocation:Doha QatarDuration:2 YearsStatus:Resident SingleTaskHSEQ responsibilities: Ensure compliance with THE COMPANY Incident Free culture, Health and Safety and Environment policy, Support and enforce the project HSEQ management system (charters, objectives, directives, plans,...

  • MIEC Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar MphExperts Full time

    Position: MIEC LeadLocation: Doha QatarDuration: 2 YearsStatus: Resident SingleTaskHSEQ responsibilities:Ensure compliance with THE COMPANY Incident Free culture, Health and Safety and Environment policy,Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications etc.),Promote HSEQ awareness...

  • Miec Maintenance Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for a MIEC Maintenance Lead for one of our clients with the following details:Location: Doha, QatarStart Date: 01-JUN-2024End Date: 31-MAY-2026Doha Logistics allowance: SINGLE statusQualification and Experience Required:Minimum Qualifications: Bachelor's degree or equivalent in...

  • MIEC Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar Airswift Full time

    Job Specification & Key Accountabilities(Duties include but not limited to):Ensure proper preparation and execution of the MIE Project and handover to the FOPS department.Follow up on Maintenance Engineering activities as per the Maintenance & Inspection Engineering Contract (MIEC).Ensure MIEC activities comply with CLIENT specifications, standards, and...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for Ruya Batch 1 MIEC Lead for one of our clients with the following details:Start date: AUG-2024Demob date: JUL-2026Location: Doha. Qatar ( with possible missions to MIEC contractor offices and possible at EPCC yard location. Offshore if necessary )Work status : Resident....


  • Doha, Baladīyat ad Dawḩah, Qatar Energy Jobline Full time

    We are looking for Ruya Batch 1 MIEC Lead for one of our clients with the following details:Start date: AUG-2024Demob date: JUL-2026Location: Doha. Qatar ( with possible missions to MIEC contractor offices and possible at EPCC yard location. Offshore if necessary )Work status : Resident. SingleQualifications & Experience Required:Bachelor's degree or...

  • MIEC Spare Parts Lead

    4 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: Spare Parts Lead Start date: 01-JUN-2024 Demob date: 31-MAY-2026 Location: Doha Qualification and backgroundBachelor's degree or equivalent in engineeringSenior Maintenance Engineer with at least 10 years' experience with Maintenance hand-on experience and previous experience gained in Maintenance operations management position,Experience with...

  • MIEC Spare Parts Lead

    1 month ago


    Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: Spare Parts Lead Start date: 01-JUN-2024 Demob date: 31-MAY-2026 Location: Doha Qualification and backgroundBachelor's degree or equivalent in engineeringSenior Maintenance Engineer with at least 10 years' experience with Maintenance hand-on experience and previous experience gained in Maintenance operations management position,Experience with...


  • Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: MIEC Inspection Engineer Location: Doha Start Date : 01-APR-2024 End Date : 31-MAR-2026 Qualification and background Minimum Qualifications:Bachelor's degree or equivalent in engineering.Minimum Experience:Minimum 3-8 years' experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering...


  • Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: MIEC Inspection Engineer Location: Doha Start Date : 01-APR-2024 End Date : 31-MAR-2026 Qualification and background Minimum Qualifications:Bachelor's degree or equivalent in engineering.Minimum Experience:Minimum 3-8 years' experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering...

  • Miec Spare Parts Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar NES FIRCROFT Full time

    BH-262941Posted: 06/03/2024 Competitive Qatar Doha Contract Oil & GasPosition: Spare Parts LeadStart date: 01-JUN-2024Demob date: 31-MAY-2026Location: DohaQualification and background Bachelor's degree or equivalent in engineering Senior Maintenance Engineer with at least 10 years' experience with Maintenance handon experience and previous experience gained...


  • Doha, Baladīyat ad Dawḩah, Qatar NES FIRCROFT Full time

    BH-260996Posted: 16/02/2024 Competitive Qatar Doha Contract Oil & Gas PetrochemicalPosition: MIEC Inspection EngineerLocation: DohaStart Date : 01-APR-2024End Date : 31-MAR-2026Qualification and backgroundMinimum Qualifications: Bachelor's degree or equivalent in engineering.Minimum Experience: Minimum 38 years' experience in the petrochemical, refining, Oil...

  • Rp Miec Engineer

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for RP MIEC Engineer for one of our clients with the following details:Location : Doha, QatarStart date: 01-JUN-2024Demob date: 31-MAY-2026Work Status : Resident, SingleQualifications, Experience, & Skills:Minimum Qualifications:Bachelor's degree or equivalent in engineering Minimum 38...

  • Cpp QA/qc Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaOur client, Major Oil & Gas company, is urgently looking for a "CPP QA/QC Lead" to work in Qatar.Start date: 01 - JUN-2023End date:01-JUN-2025**Location: Doha OnshoreContract Duration:2 Years**Qualifications & Experience Required: Qualification: Engineering master's degree or experienced technician...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Category: MechanicalIndustry: Oil & GasCity/Country: Doha, QatarLocation: DohaPosition: CPP Preservation Mechanical SupervisorStart date:01-JUL-2023End date:31-JUL-2024Location:Doha/KoreaActivities: To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all activities, To carry out work in compliance with COMPANY values...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Consulting Services Full time

    We are looking for a CPP Mechanical Package Superintendent with the following details :Start Date : AUG 2024End Date : MAR 2025Location: Doha / Offshore / Korea ( All locations )Work Status : Resident, Single QUALIFICATIONS & EXPERIENCE REQUIREDEducation to HND/BTS level or COMPANY approved equivalent in engineering discipline.Professional Experience (number...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Category: Oil and GasIndustry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for a CPP Mechanical Package Superintendent with the following details:Start Date : AUG 2024End Date : MAR 2025Location: Doha / Offshore / Korea ( All locations )Work Status : Resident, SingleQUALIFICATIONS & EXPERIENCE REQUIRED Education to HND/BTS level or COMPANY...

  • Project Cost Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for a Project Cost Lead for one of our clients with the following details:Location: Doha/KoreaStart Date: 01-AUG-2024End Date: 31-AUG-2025Doha Logistics allowance: SINGLE statusQualification and Experience Required: Degree in Economics or Engineering or equivalent Minimum 15 years'...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: QatarLooking for a CPP Engineering Coordinator to work in Doha/ India/Vietnam/Malaysia/Oman/China/Korea/ Singapore.Start date: 01-SEP-2023End date: 31-AUG-2025Location: Doha/ India/Vietnam/Malaysia/Oman/China/Korea/ Singapore.**Contract duration:2 yearsQualifications and experience required: Engineering...