Miec Maintenance Lead

2 weeks ago

Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

Industry:
Oil & Gas

City/Country:
Doha, Qatar


Location:
Doha

We are looking for a
MIEC Maintenance Lead for one of our clients with the following details:



Location:
Doha
, Qatar

Start Date: 01-JUN-2024

End Date: 31-MAY-2026

Doha Logistics allowance:
SINGLE status

Qualification and Experience Required:

Minimum Qualifications:

  • Bachelor's degree or equivalent in engineering.

Minimum Experience:

  • Senior Maintenance Engineer with at least 10 years experience with Maintenance handon experience and previous experience gained in Maintenance operations management position,
  • Previous experience in the supervision of Maintenance Engineering activities within a project team and/or experience in the use of the Risk Based Maintenance (RBM) or equivalent would be beneficial.

Job-Specific Skills (Generic / Technical):

  • Leadership skills and good communication skills,
  • Ability to work on projects in a complex and multicultural environment,
  • Experience with CMIMS,
  • Detailed knowledge of legislation/regulations relevant to Maintenance discipline,
  • Familiar with company standards, MANASA and relevant codes and standards,
  • Fluent in English (listening, writing and speaking) and its technical vocabulary,
  • Computer literate,
  • Available for missions as necessitated by project,
  • Medically fit to travel to Offshore Oil & Gas Platforms,
  • H2S OPITO and T-BOSIET trainings.

Activities:

HSEQ responsibilities:

  • Ensure compliance with the company's Incident Free culture, Health and Safety and Environment policy,
  • Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications etc.),
  • Promote HSEQ awareness of workforce at all levels through proactive attitude site tour management at CTR yard, HSEQ meetings ensuring risks are identified, actions assigned and managed within Project team and Contractors,
  • Monitor work activities, especially areas where unsafe acts could occur and ensure that risks have been properly identified and assessed prior to work execution (Job Safety Analysis),
  • Ensure that potential failures, weaknesses and hazards are immediately reported.

During Basic Engineering Phases:

  • Responsible for the preparation of Scope of Work (SOW) for the MIEC contract and assist with CFT preparation along with Field Operations Maintenance Engineering Team,
  • Ensure that all Maintenance and Integrity aspects are captured in the EPCIC contract CFT,
  • Responsible for the review of the Maintenance and Integrity technical bids and answer to Bidders Maintenance and Integrity technical clarifications,
  • Support the cost reduction initiative with providing C&P the requirements to challenge tenders bid, reducing the cost of the Contract.
  • Ensure that Maintainability aspects, handling requirements and Maintenance access are properly addressed during detailed engineering, construction and commissioning phases including participation to 3D modelling and constructability reviews.

MIEC General Responsibilities:

  • Lead the review of all Maintenance and Integrity deliverables issued by the MIE Projects Contractors,
  • Attend weekly and monthly meetings, following progress, taking decisions, and ensuring actions are closed out without delaying the Project,
  • Ensure all outstanding Maintenance and Integrity related actions were managed and closed out within time.
  • Provide assistance to the MIE Contractor Maintenance and Integrity Leaders to ensure compliance with project specifications.
  • Challenge MIEC contractor for late delivery and any potential requirement for Change Orders.
  • Review the Maintenance and Integrity Work Time Schedule update,
  • Participate to Maintenance and Integrity MIEC workshops with Company Stakeholders to ensure alignment,
  • Attend Quarterly REX with MIEC contractor and ensuring any lessons learnt are captured in REX register for implementation into future MIECs.
  • Participate to the Project Quality Review Audits and ensured any outcomes are captured, actioned and closed out.

MIEC Technical Responsibilities:

  • Responsible for developing new or updating existing Maintenance philosophies,
  • Accountable for ensuring that Maintainability aspects and Maintenance access are properly addressed during Detailed Engineering, Construction and Commissioning phases including participation to 3D model reviews,
  • Lead the review of the Hierarchy Breakdown deliverables issued by the MIE Projects Contractors,
  • Participation in RBM studies or equivalent to ensure Maintenance requirements are properly addressed,
  • Validate the Maintenance dossiers prepared by MIEC,
  • Accountable for the mass loading of PM data into the CMIMS,
  • Contribute to MIE contract final report and REX at the end of the project,
  • Accountable of Project handover to Field Operations Team for Maintenance (incl. PRODOM).

Project Responsibilities:

  • Provide support to project startup,
  • Provide support as required to commissioning activities,
  • Facilita

  • Miec Lead

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaPosition: MIEC LeadLocation:Doha QatarDuration:2 YearsStatus:Resident SingleTaskHSEQ responsibilities: Ensure compliance with THE COMPANY Incident Free culture, Health and Safety and Environment policy, Support and enforce the project HSEQ management system (charters, objectives, directives, plans,...

  • MIEC Lead

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar MphExperts Full time

    Position: MIEC LeadLocation: Doha QatarDuration: 2 YearsStatus: Resident SingleTaskHSEQ responsibilities:Ensure compliance with THE COMPANY Incident Free culture, Health and Safety and Environment policy,Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications etc.),Promote HSEQ awareness...

  • MIEC Lead

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Airswift Full time

    Job Specification & Key Accountabilities(Duties include but not limited to):Ensure proper preparation and execution of the MIE Project and handover to the FOPS department.Follow up on Maintenance Engineering activities as per the Maintenance & Inspection Engineering Contract (MIEC).Ensure MIEC activities comply with CLIENT specifications, standards, and...

  • CPP MIEC Lead

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Oil and Gas Job Search Ltd Full time

    The purpose of the Job is to guarantee the proper preparation and execution of one MIE Project. As such, the job holder is accountable: To ensure the proper preparation and execution of the Maintenance and Inspection Engineering (MIE) Project up to handover of MIEC deliverables to department. To ensure follow-up of Maintenance Engineering activities in...

  • CPP MIEC Lead

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Brunel GmbH Full time

    HSEQ responsibilities:Ensure compliance with the COMPANY Incident Free culture, Health and Safety and Environment Policy,Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures, and specifications etc.),Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at...

  • Ruya Batch 1 Miec Lead

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for Ruya Batch 1 MIEC Lead for one of our clients with the following details:Start date: AUG-2024Demob date: JUL-2026Location: Doha. Qatar ( with possible missions to MIEC contractor offices and possible at EPCC yard location. Offshore if necessary )Work status : Resident....

  • Maintenance Lead

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Brunel Full time

    The purpose of the Job is to guarantee that the Maintenance & Inspection Engineering (MIE) Contractor Maintenance and Integrity deliverables follow the same strategy across the MIE Projects. This strategy must be aligned with FOPS Maintenance team requirements.About this role Ensure that all Maintenance and Integrity aspects are captured in the EPCIC...

  • Ruya Batch 1 MIEC Lead

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Energy Jobline Full time

    We are looking for Ruya Batch 1 MIEC Lead for one of our clients with the following details:Start date: AUG-2024Demob date: JUL-2026Location: Doha. Qatar ( with possible missions to MIEC contractor offices and possible at EPCC yard location. Offshore if necessary )Work status : Resident. SingleQualifications & Experience Required:Bachelor's degree or...

  • MIEC Spare Parts Lead

    4 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: Spare Parts Lead Start date: 01-JUN-2024 Demob date: 31-MAY-2026 Location: Doha Qualification and backgroundBachelor's degree or equivalent in engineeringSenior Maintenance Engineer with at least 10 years' experience with Maintenance hand-on experience and previous experience gained in Maintenance operations management position,Experience with...

  • MIEC Spare Parts Lead

    1 month ago

    Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: Spare Parts Lead Start date: 01-JUN-2024 Demob date: 31-MAY-2026 Location: Doha Qualification and backgroundBachelor's degree or equivalent in engineeringSenior Maintenance Engineer with at least 10 years' experience with Maintenance hand-on experience and previous experience gained in Maintenance operations management position,Experience with...

  • Miec Spare Parts Lead

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar NES FIRCROFT Full time

    BH-262941Posted: 06/03/2024 Competitive Qatar Doha Contract Oil & GasPosition: Spare Parts LeadStart date: 01-JUN-2024Demob date: 31-MAY-2026Location: DohaQualification and background Bachelor's degree or equivalent in engineering Senior Maintenance Engineer with at least 10 years' experience with Maintenance handon experience and previous experience gained...

  • Maintenance Leader

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Brunel Qatar Full time

    Ensure that all Maintenance and Integrity aspects are captured in the EPCIC contract CFT,Responsible for the review of the Maintenance and Integrity technical bids and answer to Bidders Maintenance and Integrity technical clarifications,Support the cost reduction initiative with providing C&P the requirements to challenge tenders bid, reducing the cost of...

  • MIEC Inspection Engineer

    4 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: MIEC Inspection Engineer Location: Doha Start Date : 01-APR-2024 End Date : 31-MAR-2026 Qualification and background Minimum Qualifications:Bachelor's degree or equivalent in engineering.Minimum Experience:Minimum 3-8 years' experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering...

  • MIEC Inspection Engineer

    2 months ago

    Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: MIEC Inspection Engineer Location: Doha Start Date : 01-APR-2024 End Date : 31-MAR-2026 Qualification and background Minimum Qualifications:Bachelor's degree or equivalent in engineering.Minimum Experience:Minimum 3-8 years' experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering...

  • Rp Miec Engineer

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for RP MIEC Engineer for one of our clients with the following details:Location : Doha, QatarStart date: 01-JUN-2024Demob date: 31-MAY-2026Work Status : Resident, SingleQualifications, Experience, & Skills:Minimum Qualifications:Bachelor's degree or equivalent in engineering Minimum 38...

  • Miec Inspection Engineer

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar NES FIRCROFT Full time

    BH-260996Posted: 16/02/2024 Competitive Qatar Doha Contract Oil & Gas PetrochemicalPosition: MIEC Inspection EngineerLocation: DohaStart Date : 01-APR-2024End Date : 31-MAR-2026Qualification and backgroundMinimum Qualifications: Bachelor's degree or equivalent in engineering.Minimum Experience: Minimum 38 years' experience in the petrochemical, refining, Oil...

  • Maintenance Leader

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Brunel Qatar Full time

    Ensure that all Maintenance andIntegrity aspects are captured in the EPCIC contractCFT,Responsible for the review of theMaintenance and Integrity technical bids and answer to BiddersMaintenance and Integrity technicalclarifications,Support the cost reductioninitiative with providing C&P the requirements to challengetenders bid, reducing the cost of...

  • Engineer (Maintenance & Inspection)

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Brunel Full time

    To ensure follow-up of Maintenance Engineering activities in line with Maintenance & Inspection Engineering contract To ensure compliance of activities with specifications/standards and local legislation, To coordinate all project MIEC activities in collaboration with MIE Contractor, Maintenance Department and MIEC Lead,About this role HSEQ responsibilities:...

  • Spare Parts Lead

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Brunel Full time

    The purpose of the Job is to guarantee that the Maintenance & Inspection Engineering (MIE) Contractor spare parts related deliverables follow the same strategy across the MIE Projects. This strategy must be aligned with FOPS Maintenance team requirements. To ensure the proper preparation and execution of the Maintenance Engineering activities included in all...

  • Senior MIEC Instrumentation Engineer

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Tanqeeb Full time

    JOB PURPOSE & KEY ACCOUNTABILITIES:The purpose of the Job is to guarantee that the Instrumentation part of all Maintenance & Inspection Engineering (MIE) Contractor deliverables are aligned with FOPS Maintenance team requirements. As such, the job holder is accountable:Responsible for the review of all Maintenance and Spare Parts deliverables related to...