Maintenance Inspection Engineer

1 month ago


Doha, Qatar Brunel Qatar Full time
  • To ensure follow-up of Maintenance Engineering activities in line with Maintenance & Inspection Engineering contract
  • To ensure compliance of activities with specifications/standards and local legislation,
  • To co-ordinate all project MIEC activities in collaboration with MIE Contractor, Maintenance Department and MIEC Lead,

Your Tasks

  • HSEQ responsibilities:
    • Ensure compliance with Incident Free culture, Health and Safety and Environment policy,
    • Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications etc.),
    • Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at CTR yard, HSEQ meetings ensuring risks are identified, actions assigned and managed within Project team and Contractors,
    • Monitor work activities, especially areas where unsafe acts could occur and ensure that risks have been properly identified and assessed prior to work execution (Job Safety Analysis),
    • Ensure that potential failures, weaknesses and hazards are immediately reported.
  • During Basic Engineering Phases:
    • Participate to the preparation of Scope of Work (SOW) for the MIEC contract and assist with CFT preparation along with Field Operations Maintenance Engineering Team,
    • Ensure that all Maintenance and Inspection aspects are captured in the EPCIC contract CFT,
    • Ensure that maintainability aspects, handling requirements and Maintenance access are properly addressed during 3D models reviews.
    • Support the cost reduction initiative with providing C&P the requirements to challenge tenders bid, reducing the cost of the Contract.
  • MIEC General Responsibilities:
    • Participate to the review of all contractual deliverables issued by the MIE Project Contractor,
    • Attend weekly and monthly meetings, following progress, taking decisions, and ensuring actions are closed out without delaying the project,
    • Review the progress measurement figures established by MIE contractor,
    • Challenge Project MIE Contractor for late delivery and any potential requirement for change orders,
    • Participate to MIEC workshops with Company Stakeholders to ensure alignment,
    • Attend quarterly REX with MIE Contractor, ensuring any lessons learnt are captured in REX register for implementation into future MIECs,
    • Participate to the Project Quality Review Audits and ensured any outcomes are captured, actioned and closed out.
  • MIEC Technical Responsibilities:
    • Responsible for Project MIE activities ensuring that schedule meets EPCIC and Company milestones and readiness for start-up with emphasis being on operating and capital spare part selection process and procurement, including inspection, shipment, delivery and storage/preservation,
    • Participation in criticality reviews, RCM studies or equivalent to ensure maintenance requirements are properly addressed
    • Participate in the resolution of the clarifications or requests raised by the MIE Contractor
    • Contribute to MIE contract final report and REX at the end of the project,
    • Participate to the Project handover to Field Operations Team for Maintenance and Inspection (incl. PRODOM).
  • Project Responsibilities:
    • Contribute to the management of the Project as directed by MIEC Lead
    • Provide support to project start-up,
    • Provide support as required to commissioning activities,
    • Facilitate efficient communication/information flow with Head of Maintenance and Inspection Engineering, Project team, stakeholders and Maintenance department,
    • Ad-hoc activities as required by line manager,
    • All staff must be willing to participate in Crisis Response Training and to assist during Emergency Response Situations if required.


  • Doha, Qatar Brunel Full time

    To ensure follow-up of Maintenance Engineering activities in line with Maintenance & Inspection Engineering contract - To ensure compliance of activities with specifications/standards and local legislation, - To co-ordinate all project MIEC activities in collaboration with MIE Contractor, Maintenance Department and MIEC Lead, **About this role** - HSEQ...


  • Doha, Baladīyat ad Dawḩah, Qatar Brunel Full time

    To ensure follow-up of Maintenance Engineering activities in line with Maintenance & Inspection Engineering contract To ensure compliance of activities with specifications/standards and local legislation, To coordinate all project MIEC activities in collaboration with MIE Contractor, Maintenance Department and MIEC Lead,About this role HSEQ responsibilities:...


  • Doha, Qatar Brunel Qatar Full time

    HSEQ responsibilities:Ensure compliance with Incident Free culture, Health and Safety and Environment policy,Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications etc.),Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at CTR yard, HSEQ...


  • Doha, Qatar Brunel Qatar Full time

    HSEQ responsibilities:Ensure compliance with Incident Free culture, Health and Safety and Environment policy,Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications etc.),Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at CTR yard, HSEQ...

  • Inspection Engineer

    2 weeks ago


    Doha, Qatar Brunel Full time

    To supervise, conduct and execute various online and offline inspection activities on Plant Static equipment and piping. Coordinate inspection and NDE works with outside parties and analyze the findings to ensure the plant’s static equipment/piping, reliability and availability; - Supervise and - analyze the outcomes of - various online and offline...

  • Inspection Engineer

    4 weeks ago


    Doha, Qatar Brunel Full time

    Participate in technical reviews regarding Maintainability & Inspectability of installations during pre-feed, feed, and detailed engineering. - Throughout the project, ensure Inspection and Integrity Engineering activities are performed in line with Maintenance & Inspection Engineering contract (MIEC). **About this role** - HSEQ responsibilities: - Ensure...


  • Doha, Qatar Brunel Full time

    Participate in technical reviews regarding Maintainability & Inspectability of installations during pre-feed, feed, and detailed engineering. - Throughout the project, ensure Inspection and Integrity Engineering activities are performed in line with Maintenance & Inspection Engineering contract (MIEC). **About this role** - HSEQ responsibilities: - Ensure...

  • Maintenance Manager

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar Al Taaluq Contracting & Maintenance Full time

    We are currently searching for a qualified and reliable maintenance manager to lead our maintenance department. As the maintenance manager, you will be responsible for managing all installation, repair, and upkeep operations of our company's facilities. Your duties will include maintaining flats, Villas, villa compound in good condition.Maintenance Manager...


  • Doha, Qatar NES FIRCROFT Full time

    BH-260996 Posted: 16/02/2024 - Competitive- Qatar Doha- Contract- Oil & Gas- Petrochemical**Position: MIEC Inspection Engineer** **Location: Doha** **Start Date : 01-APR-2024** **End Date : 31-MAR-2026** **Qualification and background** **Minimum Qualifications**: - Bachelor’s degree or equivalent in engineering. **Minimum Experience**: - Minimum 3-8...


  • Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: MIEC Inspection Engineer Location: Doha Start Date : 01-APR-2024 End Date : 31-MAR-2026 Qualification and background Minimum Qualifications:Bachelor's degree or equivalent in engineering.Minimum Experience:Minimum 3-8 years' experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering...


  • Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: MIEC Inspection Engineer Location: Doha Start Date : 01-APR-2024 End Date : 31-MAR-2026 Qualification and background Minimum Qualifications:Bachelor's degree or equivalent in engineering.Minimum Experience:Minimum 3-8 years' experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering...

  • Inspection Engineer

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar Brunel Full time

    Participate in technical reviews regarding Maintainability & Inspectability of installations during pre-feed, feed, and detailed engineering. Throughout the project, ensure Inspection and Integrity Engineering activities are performed in line with Maintenance & Inspection Engineering contract (MIEC).About this role HSEQ responsibilities: Ensure compliance...


  • Doha, Baladīyat ad Dawḩah, Qatar NES FIRCROFT Full time

    BH-260996Posted: 16/02/2024 Competitive Qatar Doha Contract Oil & Gas PetrochemicalPosition: MIEC Inspection EngineerLocation: DohaStart Date : 01-APR-2024End Date : 31-MAR-2026Qualification and backgroundMinimum Qualifications: Bachelor's degree or equivalent in engineering.Minimum Experience: Minimum 38 years' experience in the petrochemical, refining, Oil...


  • Doha, Qatar Brunel Full time

    To review the 3D model prior to participating in any Maintainability and Inspectability 3D model reviews, - To participate in Maintainability and Inspectability 3D model reviews (30%, 60%, 90%, follow-up meetings ) at EPC premises or online, providing their expertise and input into the design and installation of equipment, relative to Maintainability,...


  • Doha, Qatar Brunel Full time

    Organize and coordinate the development and implementation of robust inspection plans and activities, providing technical expertise in equipment integrity, and collaborating with cross-functional teams to achieve project readiness, and safe and seamless start-up of Operations Expansion & Start Up projects. - Manages low to medium complexity...

  • Maintenance Engineer

    3 weeks ago


    Doha, Qatar Porto Facility Managment Full time

    **Key Responsibilities**: - Conduct regular inspections of machinery, equipment, and systems to ensure optimal functioning. - Perform preventive maintenance and repair tasks on mechanical, electrical, and HVAC systems. - Diagnose and troubleshoot issues with machinery and equipment, implementing effective solutions. - Develop and implement maintenance...


  • Doha, Baladīyat ad Dawḩah, Qatar Brunel Full time

    To review the 3D model prior to participating in any Maintainability and Inspectability 3D model reviews, To participate in Maintainability and Inspectability 3D model reviews (30%, 60%, 90%, followup meetings ) at EPC premises or online, providing their expertise and input into the design and installation of equipment, relative to Maintainability,...


  • Doha, Qatar MPH Global Services Full time

    Industry: Oil & Gas City/Country: Doha, Qatar Location: Doha We are recruiting for **Inspection Methods Engineer **for one of our Oil and Gas Company in **Doha, Qatar.** Industry: Oil and Gas **Terms & Condition**: **Work Location**: Doha, Qatar Commencement - Jun 2023 - Jun 2024 (Extended as per the project) **Responsibilities**: - Define the Risk...


  • Doha, Qatar Brunel Qatar Full time

    Organize and coordinate the development and implementation of robust inspection plans and activities, providing technical expertise in equipment integrity, and collaborating with cross-functional teams to achieve project readiness, and safe and seamless start-up of Operations Expansion & Start Up projects.Manages low to medium complexity multi-disciplinary...


  • Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Job Description Senior Inspection Engineer Job Purpose: To provide cost effective and timely inspection support services to ensure the safe and reliable operation of the company's static pressure plant, storage tanks and interconnecting pipework. Optimize and monitor the integrity of static equipment and piping using appropriate inspection technology, NDT...