Engineer (Maintenance & Inspection)

4 days ago

Doha, Qatar Brunel Full time

To ensure follow-up of Maintenance Engineering activities in line with Maintenance & Inspection Engineering contract
- To ensure compliance of activities with specifications/standards and local legislation,
- To co-ordinate all project MIEC activities in collaboration with MIE Contractor, Maintenance Department and MIEC Lead,

**About this role**
- HSEQ responsibilities:

- Ensure compliance with Incident Free culture, Health and Safety and Environment policy,
- Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications etc.),
- Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at CTR yard, HSEQ meetings ensuring risks are identified, actions assigned and managed within Project team and Contractors,
- Monitor work activities, especially areas where unsafe acts could occur and ensure that risks have been properly identified and assessed prior to work execution (Job Safety Analysis),
- Ensure that potential failures, weaknesses and hazards are immediately reported.
- During Basic Engineering Phases:

- Participate to the preparation of Scope of Work (SOW) for the MIEC contract and assist with CFT preparation along with Field Operations Maintenance Engineering Team,
- Ensure that all Maintenance and Inspection aspects are captured in the EPCIC contract CFT,
- Ensure that maintainability aspects, handling requirements and Maintenance access are properly addressed during 3D models reviews.
- Support the cost reduction initiative with providing C&P the requirements to challenge tenders bid, reducing the cost of the Contract.
- MIEC General Responsibilities:

- Participate to the review of all contractual deliverables issued by the MIE Project Contractor,
- Attend weekly and monthly meetings, following progress, taking decisions, and ensuring actions are closed out without delaying the project,
- Review the progress measurement figures established by MIE contractor,
- Challenge Project MIE Contractor for late delivery and any potential requirement for change orders,
- Participate to MIEC workshops with Company Stakeholders to ensure alignment,
- Attend quarterly REX with MIE Contractor, ensuring any lessons learnt are captured in REX register for implementation into future MIECs,
- Participate to the Project Quality Review Audits and ensured any outcomes are captured, actioned and closed out.
- MIEC Technical Responsibilities:

- Responsible for Project MIE activities ensuring that schedule meets EPCIC and Company milestones and readiness for start-up with emphasis being on operating and capital spare part selection process and procurement, including inspection, shipment, delivery and storage/preservation,
- Participation in criticality reviews, RCM studies or equivalent to ensure maintenance requirements are properly addressed
- Participate in the resolution of the clarifications or requests raised by the MIE Contractor
- Contribute to MIE contract final report and REX at the end of the project,
- Participate to the Project handover to Field Operations Team for Maintenance and Inspection (incl. PRODOM).
- Project Responsibilities:

- Contribute to the management of the Project as directed by MIEC Lead
- Provide support to project start-up,
- Provide support as required to commissioning activities,
- Facilitate efficient communication/information flow with Head of Maintenance and Inspection Engineering, Project team, stakeholders and Maintenance department,
- Ad-hoc activities as required by line manager,
- All staff must be willing to participate in Crisis Response Training and to assist during Emergency Response Situations if required.

**What you need to bring**
- Bachelor’s degree or equivalent in engineering.
- Minimum 3-8 years’ experience in the petrochemical, refining, Oil & Gas exploration or similar industry in Maintenance Engineering role, Inspection Engineering experience being a plus.
- Good analytical skills,
- Ability to work on projects in a complex and multicultural environment,
- Experience with CMIMS,
- Familiar with standards, MANASA and relevant codes and standards,
- Fluent in English (listening, writing and speaking) and its technical vocabulary,
- Computer literate,
- Available for missions as necessitated by project,
- Medically fit to travel to Offshore Oil & Gas Platforms,
- H2S OPITO and T-BOSIET trainings.

**Benefits**
- ** Salary**:

- Day Rate in USD Plus Allowance
- ** Work Schedule**:

- 9 Hours / 6 Days
- ** Duration**:

- 31-MAY-2026, renewable
- ** Location**:

- Qatar

Academic Bachelor

  • Maintenance Inspection Engineer

    1 month ago

    Doha, Qatar Brunel Qatar Full time

    To ensure follow-up of Maintenance Engineering activities in line with Maintenance & Inspection Engineering contractTo ensure compliance of activities with specifications/standards and local legislation,To co-ordinate all project MIEC activities in collaboration with MIE Contractor, Maintenance Department and MIEC Lead, Your Tasks HSEQ...

  • Maintenance Inspection Engineer

    4 weeks ago

    Doha, Qatar Brunel Qatar Full time

    To ensure follow-up of Maintenance Engineering activities in line with Maintenance & Inspection Engineering contractTo ensure compliance of activities with specifications/standards and local legislation,To co-ordinate all project MIEC activities in collaboration with MIE Contractor, Maintenance Department and MIEC Lead, Your Tasks HSEQ...

  • Engineer (Maintenance & Inspection)

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Brunel Full time

    To ensure follow-up of Maintenance Engineering activities in line with Maintenance & Inspection Engineering contract To ensure compliance of activities with specifications/standards and local legislation, To coordinate all project MIEC activities in collaboration with MIE Contractor, Maintenance Department and MIEC Lead,About this role HSEQ responsibilities:...

  • Maintenance Inspection Engineer

    1 month ago

    Doha, Qatar Brunel Qatar Full time

    HSEQ responsibilities:Ensure compliance with Incident Free culture, Health and Safety and Environment policy,Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications etc.),Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at CTR yard, HSEQ...

  • Maintenance Inspection Engineer

    4 weeks ago

    Doha, Qatar Brunel Qatar Full time

    HSEQ responsibilities:Ensure compliance with Incident Free culture, Health and Safety and Environment policy,Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications etc.),Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at CTR yard, HSEQ...

  • Inspection Engineer

    2 weeks ago

    Doha, Qatar Brunel Full time

    To supervise, conduct and execute various online and offline inspection activities on Plant Static equipment and piping. Coordinate inspection and NDE works with outside parties and analyze the findings to ensure the plant’s static equipment/piping, reliability and availability; - Supervise and - analyze the outcomes of - various online and offline...

  • Maintenance Engineer

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Nakilat Full time

    Job Summary and PurposeThe Maintenance Engineer (AI) is responsible for monitoring of Assets in line with Asset Integrity Management System Procedure. This includes integrity of plant, facility, utility, mobility, civil & marine infrastructures in the NKOM yard and for the continual review and improvement of Asset Management Plans (AMP's). Monitoring of all...

  • Inspection Engineer

    4 weeks ago

    Doha, Qatar Brunel Full time

    Participate in technical reviews regarding Maintainability & Inspectability of installations during pre-feed, feed, and detailed engineering. - Throughout the project, ensure Inspection and Integrity Engineering activities are performed in line with Maintenance & Inspection Engineering contract (MIEC). **About this role** - HSEQ responsibilities: - Ensure...

  • Inspection Engineer

    1 day ago

    Doha, Qatar Brunel Full time

    Participate in technical reviews regarding Maintainability & Inspectability of installations during pre-feed, feed, and detailed engineering. - Throughout the project, ensure Inspection and Integrity Engineering activities are performed in line with Maintenance & Inspection Engineering contract (MIEC). **About this role** - HSEQ responsibilities: - Ensure...

  • Maintenance Manager

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Al Taaluq Contracting & Maintenance Full time

    We are currently searching for a qualified and reliable maintenance manager to lead our maintenance department. As the maintenance manager, you will be responsible for managing all installation, repair, and upkeep operations of our company's facilities. Your duties will include maintaining flats, Villas, villa compound in good condition.Maintenance Manager...

  • Miec Inspection Engineer

    3 weeks ago

    Doha, Qatar NES FIRCROFT Full time

    BH-260996 Posted: 16/02/2024 - Competitive- Qatar Doha- Contract- Oil & Gas- Petrochemical**Position: MIEC Inspection Engineer** **Location: Doha** **Start Date : 01-APR-2024** **End Date : 31-MAR-2026** **Qualification and background** **Minimum Qualifications**: - Bachelor’s degree or equivalent in engineering. **Minimum Experience**: - Minimum 3-8...

  • Eplan Engineer

    4 weeks ago

    Doha, Qatar Madre Integrated Engineering Doha Full time

    1. Independent engineering for GA & Electrical Wiring Diagrams & Loop Drawings, we shall provide(BOQ, IO list, system architecture & Panel selection and accessories) under little supervision of Siemens.2. Familiar with Siemens Automation Products (S7-400H/FH, S7-1200, S7-300, ET200M) & wiring requirement of the same.3. Familiar with Panels...

  • Eplan Engineer

    2 months ago

    Doha, Qatar Madre Integrated Engineering Doha Full time

    1. Independent engineering for GA & Electrical Wiring Diagrams & Loop Drawings, we shall provide(BOQ, IO list, system architecture & Panel selection and accessories) under little supervision of Siemens.2. Familiar with Siemens Automation Products (S7-400H/FH, S7-1200, S7-300, ET200M) & wiring requirement of the same.3. Familiar with Panels...

  • MIEC Inspection Engineer

    4 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: MIEC Inspection Engineer Location: Doha Start Date : 01-APR-2024 End Date : 31-MAR-2026 Qualification and background Minimum Qualifications:Bachelor's degree or equivalent in engineering.Minimum Experience:Minimum 3-8 years' experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering...

  • MIEC Inspection Engineer

    2 months ago

    Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: MIEC Inspection Engineer Location: Doha Start Date : 01-APR-2024 End Date : 31-MAR-2026 Qualification and background Minimum Qualifications:Bachelor's degree or equivalent in engineering.Minimum Experience:Minimum 3-8 years' experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering...

  • Inspection Engineer

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar Brunel Full time

    Participate in technical reviews regarding Maintainability & Inspectability of installations during pre-feed, feed, and detailed engineering. Throughout the project, ensure Inspection and Integrity Engineering activities are performed in line with Maintenance & Inspection Engineering contract (MIEC).About this role HSEQ responsibilities: Ensure compliance...

  • Miec Inspection Engineer

    2 weeks ago

    Doha, Baladīyat ad Dawḩah, Qatar NES FIRCROFT Full time

    BH-260996Posted: 16/02/2024 Competitive Qatar Doha Contract Oil & Gas PetrochemicalPosition: MIEC Inspection EngineerLocation: DohaStart Date : 01-APR-2024End Date : 31-MAR-2026Qualification and backgroundMinimum Qualifications: Bachelor's degree or equivalent in engineering.Minimum Experience: Minimum 38 years' experience in the petrochemical, refining, Oil...

  • Maintainability and Inspectability Engineer

    2 weeks ago

    Doha, Qatar Brunel Full time

    To review the 3D model prior to participating in any Maintainability and Inspectability 3D model reviews, - To participate in Maintainability and Inspectability 3D model reviews (30%, 60%, 90%, follow-up meetings ) at EPC premises or online, providing their expertise and input into the design and installation of equipment, relative to Maintainability,...

  • Senior Inspection Engineer

    1 week ago

    Doha, Qatar Brunel Full time

    Organize and coordinate the development and implementation of robust inspection plans and activities, providing technical expertise in equipment integrity, and collaborating with cross-functional teams to achieve project readiness, and safe and seamless start-up of Operations Expansion & Start Up projects. - Manages low to medium complexity...

  • Maintenance Engineer

    3 weeks ago

    Doha, Qatar Porto Facility Managment Full time

    **Key Responsibilities**: - Conduct regular inspections of machinery, equipment, and systems to ensure optimal functioning. - Perform preventive maintenance and repair tasks on mechanical, electrical, and HVAC systems. - Diagnose and troubleshoot issues with machinery and equipment, implementing effective solutions. - Develop and implement maintenance...