Urgent Openings for Materials Engineer- Specialized
2 weeks ago
1. Responsible for Cataloguing of Chemicals, Oils, Lubricants, Abrasives that are
Hazardous in nature.
2. Review Safety Datasheets and Technical Data Sheets provided, to decide
Hazardous Material Classification based on UN / NFPA / GHS classification system.
3. Identify Risks and Hazards applicable in planning the storage of Hazardous material
in the warehouse as per applicable statutory requirements.
4. Responsible for creating Storage Bin, Info Records, Batch Management and
Hazardous Master for applicable master records.
5. Periodic inspection covering all Chemical warehouses and prepare report with
observation to prevent any unsafe practice and incompatible storage of Chemicals.
6. Shall be able to Drive the Car and make inspection visits to the Warehouse locations
as directed.
7. Review Audit observations and ensure closure with corrective measures for
resolution and prevention in future.
8. Conduct toolbox talks and update warehouse staff for ongoing HSE measures and
proper usage of tools & tackles and act as HSE focal point to whenever required.
Responsible to review and update the Safety reports issued timely by the
department.
9. Conduct Technical evaluation of chemicals to evaluate technical offers from bidders
to ensure the availability of correct material on time.
CLASSIFICATION: C2 - CONFIDENTIAL
10. Coordinate with procurement and user department for resolution of technical
clarification from supplier. Update technical specifications of chemicals for valid
changes.
11. Review existing chemicals for specification enhancement, standardization, and
elimination of duplicates.
12. Conduct gap analysis for Chemical stored in the Warehouse and provide necessary
guideline to the staff for the safe handling of Chemicals and proper usage of
adequate PPE.
13. Conduct periodic HSE audits in the warehouse and prepare detailed report for the
review. Assist warehouse supervisors for the resolution of HSE audit observations
and promote a culture of safety within the organization.
Qualification
Bachelor’s degree or higher in Chemical Engineering or equivalent.
Experience & Technical Skills
1. A minimum of 10 years’ experience in Materials Management of Chemicals out of
which a minimum of 6 years’ experience in Oil and Gas / Allied Process Industry. ERP
knowledge in SAP MM is mandatory.
2. Well versed in managing HSE compliance of Chemical Handling and storage.
3. Knowledge of process system and chemicals used in the Oil & gas Industry.
4. Exposure of SAP Chemicals Cataloguing and integration of data with associated
functions.
5. Knowledge of compatibility study of various chemicals to define the Storage
requirement.
6. Well versed with Hazardous Material Classification based on UN / NFPA / GHS
classification system.
7. Knowledge of international HSE standard ISO 45001.
8. Experience in HSE audits for Chemical handling & storage in Oil & Gas / Process
Industry.
9. Shall be Computer literate and good working knowledge in Microsoft Office
10.Exposure of Materials Management processes for improvements in chemical
warehousing processes.
11.Good written and spoken English, problem solving skills, technical communication and
interpersonal skills.
12.Should have valid Qatar driving license.
13. Capability to understand and follow international safety standard followed in Oil & Gas
industry. IOSH certificate Managing Safely or equivalent and Control of Substances
Hazardous to Health - COSHH training certificates are mandatorily required prior to
start working with Company.
**Urgent openings for Materials Engineer
- Specialized in Chemicals/ Hazmat**
**Job Type**: Long Term
Location: Doha
Experience: 10 Yrs
Job Category: Oil and Gas
Posted 1 hour ago
-
Urgent Openings for Material Engineer
2 weeks ago
Doha, Qatar OilExec Full timeQualification Bachelor’s degree or higher in an Engineering under respective discipline Instrumentation). Experience & Technical Skills 1. A minimum of 10 years’ experience in supply chain environment, out of which a minimum of 6 years should be in Cataloguing of Engineering Materials in Oil and Gas / Allied Process Industry. ERP knowledge in SAP MM is...
-
Doha, Qatar OilExec Full timeQualification Bachelor’s degree or higher in an Engineering under respective discipline Electrical ). Experience & Technical Skills 1. A minimum of 10 years’ experience in supply chain environment, out of which a minimum of 6 years should be in Cataloguing of Engineering Materials in Oil and Gas / Allied Process Industry. ERP knowledge in SAP MM is...
-
Urgent Openings for Material Engineer
1 week ago
Doha, Qatar OilExec Full timeMATERIALS ENGINEER - INSPECTION - GOODS INWARD Qualification Bachelor’s degree or higher in Engineering under respective discipline Electrical & Instrumentation). Experience & Technical Skills 1. A minimum of 10 years’ experience in QA/ QC & Inspection environment with a minimum of 6 years’ experience with Oil & Gas / Allied process industry out of...
-
Urgent Openings for Material Engineer- Technical
2 weeks ago
Doha, Qatar OilExec Full timeConduct Technical Evaluation to evaluate technical offers from bidders in-line with company material specification. 2. Reviews technical documentation available to support the decision process. In case of deficiency or inconsistency noticed, co-ordinates as necessary with user focal point and confirms technical suitability to purchasing. Ensures that item...
-
Urgent Openings for Material Engineer- Technical
2 weeks ago
Doha, Qatar OilExec Full timeConduct Technical Evaluation to evaluate technical offers from bidders in-line with company material specification. 2. Reviews technical documentation available to support the decision process. In case of deficiency or inconsistency noticed, co-ordinates as necessary with user focal point and confirms technical suitability to purchasing. Ensures that item...
-
Urgent Openings for Material Engineer Inspection
2 weeks ago
Doha, Qatar OilExec Full timeTo Inspect the materials to the PO requirements (Technical Specification, certification, packaging, and the physical condition) and conclude the inspection outcome. 2. To refer required specifications, codes, standards or other Engineering Documents, drawings, datasheets for carrying out the Inspection. 3. Report item wise visual, dimensional, quantities...
-
Doha, Qatar OilExec Full timeMATERIAL ENGINEER - CATALOGUING 1.1 CREATION OF MATERIAL MASTER RECORDS (SAP-MM) 1.1.1 Material Master Responsible for creating the Material Master by choosing ALL the views based on material type of the commodity - Typically this would be Basic Data 1&2, Classification (as mentioned in below clause 1.2), Sales Org 1 & 2, Sales General / Plant Data,...
-
Urgent Openings for Material Engineer-
1 week ago
Doha, Qatar OilExec Full timeReceiving TPI Packages from Buyers for TPI assignment. Checking for completeness of the package received against standard requirements. Following up and getting missing documents where the package is incomplete. 2. Verifying the manufacturer details is existing in SAP-Inspection Follow System (IFS). If not existing, advise vendors / suppliers to provide...
-
Material Engineer
6 days ago
Doha, Qatar Candidzone Full timeURGENT REQUIREMENT - MATERIAL ENGINEER - Experience: Infrastructure-Road / Consultant / UPDA / ATM - Project Experience: Local Road - Ashghal - Project : Road Project - Location : Near IKEA - ATM Required : Material Engineer (P3A) - Education: Engineering /More than 10 years - Short term For interested and qualified applicants, please send your CV...
-
Material Engineer
2 weeks ago
Doha, Qatar OilExec Full timeQualification 1. Bachelor’s degree or higher in Mechanical / Metallurgical. 2. LEEA Part 1 certification. 3. IRCA Certified ISO 9001-Lead Auditor desired 4. Inspection certification in CSWIP 3.2 Senior Welding Inspector or equivalent, ASNT/PCN Level II in Radiography, Ultrasonic, Magnetic Particle and penetrant testing or equivalent, BGAS/NACE Painting...
-
Material Engineer
5 days ago
Doha, Qatar Candidzone Full timeURGENT REQUIREMENT - MATERIAL ENGINEER - Experience: Infrastructure-Road / Consultant / UPDA / ATM - Project Experience: Local Road - Ashghal - Location : Near IKEA - ATM Required : Material Engineer (P3A) - Education: Engineering /More than 10 years - Short term For interested and qualified applicants, please send your CV at: Whatsapp: +97430788811 **Job...
-
Senior Material Engineer
6 days ago
Doha, Qatar Elite Middle East Trading & Contracting Full time**Urgent Hiring: Senior Material Engineer** **Minimum 10 Years of Experience** Domain/ Field of Experience: - Asphalt plant laboratory experience - Earthworks and roadworks testing procedures - Asphalt mix design preparation and testing requirements **Job Types**: Full-time, Permanent **Experience**: - earthworks and roadworks: 10 years (required) -...
-
Material Engineer
4 days ago
Doha, Qatar Gulf Consulting Group Full timeWe are reputed Engineering Consultants based in Doha, currently looking for **Material Engineer.** **Requirements**: Minimum experience required 10 years with minimum 7 years as similar experience. Qualified professional who can manage and coordinate specialized activity, discipline or team of moderate size and complexity. Leads in the formulation of...
-
Senior Materials and Corrosion Engineer
2 weeks ago
Doha, Qatar Technip Energies Full time**Company Summary** Technip Energies is a global oil and gas leader, specialized in subsea, onshore, offshore, and surface technologies. Our mission: to enhance the performance of the world’s energy industry. How we do it: by constantly challenging conventions and investing in our 15000+ employees, across 34 countries. At Technip Energies, we aim to offer...
-
Material Data Specialist
3 days ago
Doha, Baladīyat ad Dawḩah, Qatar lxbfYeaa Full timeJob TitleMaterial Specialist - ElectricalAbout the RoleWe are working with our client, a leading company in Qatar, to source a skilled Material Specialist - Electrical. This is a 1-year residential contract renewable based in Qatar.ResponsibilitiesMaterial Master Data ManagementCleanse data using material classification templates.Populate missing...
-
Material Management Expert
5 days ago
Doha, Baladīyat ad Dawḩah, Qatar lxbfYeaa Full timeJob OverviewThe Materials Specialist role at lxbfYeaa involves analyzing the existing material master against the Classification to identify missing mandatory specifications, testing, and certifications. This includes populating data from company documents, manufacturers' websites, and physical warehouse stock to enhance the material master specification.You...
-
Job Opening for Civil Site Engineer
12 hours ago
Doha, Qatar Seko Full timeJob Opening For Civil Site Engineer Managing all Civil activities on site. Should have experience in Site QA/QC in Transmission Lines & Substation Should have experience in solar projects previously. Inspection all the civil material on site, including raw materials. 1+ years experience **Company Profile**:
-
Urgent Hiring for Beautician or Make Up Artist
2 weeks ago
Doha, Qatar Candidzone Full timeUrgent Hiring for **Beautician or make up Artist** **Beautician or make up Artist who is specializing in nail and hair - Portfolio is required** Must have very good experience with 2+years here in Qatar. **Requirements**: - Preferred nationalities include**:Client is open for any nationality.**: - Employees with a valid Qatar ID (QID) must transfer...
-
Production Incharge
12 hours ago
Doha, Qatar Al Hattab Holding Full timeUrgent Opening for Ready-mix Salary Offered: 3000-4000QAR Full Package + Company Accommodation Qualifications, Mandatory to have the below: 1. Should possess minimum 2 years as Production & Material Coordinator with experience in Ready-mix concrete industry including Qatar / GCC market. 2. Must be Locally available in QATAR with valid Qatar ID. 3....
-
Materials Engineer
1 week ago
Doha, Qatar ITALCONSULT Full timeThe main duties of Material Engineer the include, but are not limited to: - Review and approve (make recommendation for approval by the RE/SRE) of all submitted materials by the contractor. - Ensure compliance of used materials with the project’s specifications. - Participate in construction quality control. - Supervise, participate and direct sampling...