Urgent Openings for Material Engineer-
2 weeks ago
Receiving TPI Packages from Buyers for TPI assignment. Checking for completeness
of the package received against standard requirements. Following up and getting
missing documents where the package is incomplete.
2. Verifying the manufacturer details is existing in SAP-Inspection Follow System (IFS).
If not existing, advise vendors / suppliers to provide manufacturer address and contact
details and get updated in SAP-IFS.
3. Generate TPI Assignment Documents and advise to Manufacturer on TPI
Assignment. Get the Documents signed by Sr. Materials Engineer (Inspection).
4. Transmit the TPI assignment along with unpriced Purchase Order Copy and required
attachments to TPI Agency and TPI Advise to Manufacturer.
5. Update all correspondences for each Purchase Order in SAP-IFS. (Critical and major
activity)
6. Identify the documents required based on Purchase Order requirements and follow
up with manufacturers for drawings, ITP’s/ QCP’s & Various Procedures submission
(Major Activity)
7. Participate in weekly review of all existing TPI orders and update the follow up status.
8. Verify the TPI Reports for correctness and completeness, Inspection Hours, Mileage
based on the specified locations.
9. Ensure SAP-IFS is updated with TPI reports data (Geographic specific - Type of
Inspection Personnel, No of Hours, Kilometers travelled) for invoicing purposes.
10.Verify TPI Release Notes are in-line with PO requirements and advise TPI agency for
any discrepancies. Advise Shipping Section / Vendor depending on the terms of
Delivery.
11.Verify the Final Certification and Documentation submitted is in line with PO
requirements.
12.Ensure all Approved Documents, TPI Reports, Release Notes, Final Certification and
documentation are documented electronically in SAP
13.Prepare summary for Liquidated Damages (LD) issues based on the correspondence
in SAP-IFS as per Buyer requests
14.Adhere to section work instructions / guidelines to perform the inspection activities
15.Submit weekly & monthly report to Sr. Materials Engineer (Inspection) for the Materials
Inspection activities of TPI activities.
Qualification
Bachelor’s degree or higher in Engineering under respective discipline (Mechanical /
Metallurgy / Electrical & Instrumentation).
Experience & Technical Skills
1. A minimum of 10 years’ experience in QA/ QC & Inspection environment with a
minimum of 6 years’ experience with Oil & Gas / Allied process industry out of which
at least 5 years should be relevant to Third Party Inspection.
2. knowledge of General Engineering Practices / International Standards
3. Well-versed and thorough knowledge in relevant international standards API, ASME,
ISO, NEMA, IEEE, IEC, NFPA, BASEEFA, ATEX, ANSI, ASTM, TEMA, BS and
related codes / standards / specifications & statutory regulations
4. Able to understand and interpret co specifications & regulations required to
deliver the job function effectively.
5. Good command of certification requirements for various materials and plant
equipment.
6. Capable of interpreting technical drawings, data sheets and specifications.
7. Shall be Computer literate with knowledge of ERP software (SAP) and MS office
8. Good written and spoken English, problem solving skills, technical, interpersonal skills
and coordination skills in dealing with worldwide manufacturers and suppliers.
9. Shall be capable of understanding and reviewing ITP’s, Welding, NDT, Painting and
various test procedures.
10. Capability to understand and follow international safety standard followed in Oil & Gas
industry. IOSH certificate Managing Safely or equivalent is mandatorily required prior
to start working with Company.
**Urgent openings for Material Engineer
- (TPI) Mechanical**
**Job Type**: Long Term
Location: Doha
Experience: 10 Yrs
Job Category: Oil and Gas
Posted 1 day ago
-
Urgent Openings for Material Engineer
2 weeks ago
Doha, Qatar OilExec Full timeQualification Bachelor’s degree or higher in an Engineering under respective discipline Instrumentation). Experience & Technical Skills 1. A minimum of 10 years’ experience in supply chain environment, out of which a minimum of 6 years should be in Cataloguing of Engineering Materials in Oil and Gas / Allied Process Industry. ERP knowledge in SAP MM is...
-
Doha, Qatar OilExec Full timeQualification Bachelor’s degree or higher in an Engineering under respective discipline Electrical ). Experience & Technical Skills 1. A minimum of 10 years’ experience in supply chain environment, out of which a minimum of 6 years should be in Cataloguing of Engineering Materials in Oil and Gas / Allied Process Industry. ERP knowledge in SAP MM is...
-
Urgent Openings for Material Engineer
2 weeks ago
Doha, Qatar OilExec Full timeMATERIALS ENGINEER - INSPECTION - GOODS INWARD Qualification Bachelor’s degree or higher in Engineering under respective discipline Electrical & Instrumentation). Experience & Technical Skills 1. A minimum of 10 years’ experience in QA/ QC & Inspection environment with a minimum of 6 years’ experience with Oil & Gas / Allied process industry out of...
-
Urgent Openings for Material Engineer- Technical
2 weeks ago
Doha, Qatar OilExec Full timeConduct Technical Evaluation to evaluate technical offers from bidders in-line with company material specification. 2. Reviews technical documentation available to support the decision process. In case of deficiency or inconsistency noticed, co-ordinates as necessary with user focal point and confirms technical suitability to purchasing. Ensures that item...
-
Urgent Openings for Material Engineer- Technical
2 weeks ago
Doha, Qatar OilExec Full timeConduct Technical Evaluation to evaluate technical offers from bidders in-line with company material specification. 2. Reviews technical documentation available to support the decision process. In case of deficiency or inconsistency noticed, co-ordinates as necessary with user focal point and confirms technical suitability to purchasing. Ensures that item...
-
Urgent Openings for Material Engineer Inspection
2 weeks ago
Doha, Qatar OilExec Full timeTo Inspect the materials to the PO requirements (Technical Specification, certification, packaging, and the physical condition) and conclude the inspection outcome. 2. To refer required specifications, codes, standards or other Engineering Documents, drawings, datasheets for carrying out the Inspection. 3. Report item wise visual, dimensional, quantities...
-
Doha, Qatar OilExec Full timeMATERIAL ENGINEER - CATALOGUING 1.1 CREATION OF MATERIAL MASTER RECORDS (SAP-MM) 1.1.1 Material Master Responsible for creating the Material Master by choosing ALL the views based on material type of the commodity - Typically this would be Basic Data 1&2, Classification (as mentioned in below clause 1.2), Sales Org 1 & 2, Sales General / Plant Data,...
-
Doha, Qatar OilExec Full time1. Responsible for Cataloguing of Chemicals, Oils, Lubricants, Abrasives that are Hazardous in nature. 2. Review Safety Datasheets and Technical Data Sheets provided, to decide Hazardous Material Classification based on UN / NFPA / GHS classification system. 3. Identify Risks and Hazards applicable in planning the storage of Hazardous material in the...
-
Material Engineer
1 week ago
Doha, Qatar Candidzone Full timeURGENT REQUIREMENT - MATERIAL ENGINEER - Experience: Infrastructure-Road / Consultant / UPDA / ATM - Project Experience: Local Road - Ashghal - Project : Road Project - Location : Near IKEA - ATM Required : Material Engineer (P3A) - Education: Engineering /More than 10 years - Short term For interested and qualified applicants, please send your CV...
-
Material Engineer
1 week ago
Doha, Qatar Candidzone Full timeURGENT REQUIREMENT - MATERIAL ENGINEER - Experience: Infrastructure-Road / Consultant / UPDA / ATM - Project Experience: Local Road - Ashghal - Location : Near IKEA - ATM Required : Material Engineer (P3A) - Education: Engineering /More than 10 years - Short term For interested and qualified applicants, please send your CV at: Whatsapp: +97430788811 **Job...
-
Senior Material Engineer
1 week ago
Doha, Qatar Elite Middle East Trading & Contracting Full time**Urgent Hiring: Senior Material Engineer** **Minimum 10 Years of Experience** Domain/ Field of Experience: - Asphalt plant laboratory experience - Earthworks and roadworks testing procedures - Asphalt mix design preparation and testing requirements **Job Types**: Full-time, Permanent **Experience**: - earthworks and roadworks: 10 years (required) -...
-
Job Opening for Civil Site Engineer
3 days ago
Doha, Qatar Seko Full timeJob Opening For Civil Site Engineer Managing all Civil activities on site. Should have experience in Site QA/QC in Transmission Lines & Substation Should have experience in solar projects previously. Inspection all the civil material on site, including raw materials. 1+ years experience **Company Profile**:
-
Production Incharge
3 days ago
Doha, Qatar Al Hattab Holding Full timeUrgent Opening for Ready-mix Salary Offered: 3000-4000QAR Full Package + Company Accommodation Qualifications, Mandatory to have the below: 1. Should possess minimum 2 years as Production & Material Coordinator with experience in Ready-mix concrete industry including Qatar / GCC market. 2. Must be Locally available in QATAR with valid Qatar ID. 3....
-
Materials Engineer
2 weeks ago
Doha, Qatar ITALCONSULT Full timeThe main duties of Material Engineer the include, but are not limited to: - Review and approve (make recommendation for approval by the RE/SRE) of all submitted materials by the contractor. - Ensure compliance of used materials with the project’s specifications. - Participate in construction quality control. - Supervise, participate and direct sampling...
-
Material Engineer
2 weeks ago
Doha, Qatar Ruby Information Technology Solutions Full time**MATERIAL ENGINEER** The **MATERIAL ENGINEER** is part of the shared services team and will be providing all necessary assistance to the construction team with respect to all materials submittals, approvals, testing, sampling, etc. He will participate in the quality control of materials including all the laboratory and field testing, acceptance of used...
-
Material Engineer
1 week ago
Doha, Qatar ITALCONSULT Full timeThe main duties of Material Engineer the include, but are not limited to: - Review and approve (make recommendation for approval by the RE/SRE) of all submitted materials by the contractor. - Ensure compliance of used materials with the project’s specifications. - Participate in construction quality control. - Supervise, participate and direct sampling...
-
Material Engineer
4 days ago
Doha, Qatar Drawlines Consult WLL Full time**Drawlines **Consult is among the leading BIM & CAD design solution firms. We build success and reputation for our clients with high-quality and cost-effective BIM modeling, CAD drafting, Design Support, Interior design, and Engineering Workforce solutions. Over the years, we have partnered in delivering numerous small, medium, and mega projects across GCC...
-
Material Specialist-engineer
3 days ago
Doha, Qatar Swan Global WLL Full timeWe have urgent requirement for the position of Material Specialist Engineer Position Name: - Material Specialist Engineer Project Duration: - 11 Months and Ext Experience: - 6 Years Working Hrs: - 8 Hrs/6 Days Education: - B.E in Mechanical or Electrical Location: - MIC, Qatar **Salary**: - Up to 20,000 QAR The Warehouse Materials Specialist...
-
Senior Materials and Corrosion Engineer
2 weeks ago
Doha, Qatar Technip Energies Full time**Company Summary** Technip Energies is a global oil and gas leader, specialized in subsea, onshore, offshore, and surface technologies. Our mission: to enhance the performance of the world’s energy industry. How we do it: by constantly challenging conventions and investing in our 15000+ employees, across 34 countries. At Technip Energies, we aim to offer...
-
Material Engineer
1 week ago
Doha, Qatar EGEC QATAR Full time**Job Summary**: **Duties and responsibilities**: - Identify, select and recommend material based on weight, strength, heat and cold tolerance, cost and durability. - Measure performance of various materials in accordance with specifications. - Observe or participate in product testing process as appropriate. - Gather data and identify the reasons when a...