Maintainability and Inspectability Engineer

4 weeks ago


Doha, Qatar Brunel Full time

To review the 3D model prior to participating in any Maintainability and Inspectability 3D model reviews,
- To participate in Maintainability and Inspectability 3D model reviews (30%, 60%, 90%, follow-up meetings ) at EPC premises or online, providing their expertise and input into the design and installation of equipment, relative to Maintainability, Inspectability and material handling.
- Identifying concerns and ensuring punches are rectified or recorded,
- To follow all punch list items recorded within the MIE Scope through to punch closure,
- To ensure and verify that all material handling devices defined during the detailed engineering phase have been correctly selected and methods of installation meet COMPANY standards.

**About this role**
- Ensure MIE department resources complete the HSEQ mandatory trainings on time,
- Monitor work activities, especially areas where unsafe acts could occur and ensure that risks have been properly identified and assessed prior to work execution (Job Safety Analysis),
- Ensure that potential failures, weaknesses and hazards are immediately reported,
- Verify during the 3D Model reviews that all HSE aspects associated with regards to Maintenance and Inspection can be safely performed during the life cycle of the Installation. This includes the ability to safely deploy life saving equipment in event of an emergency.
- Review deliverables issued by the MIE Contractor related to the Maintainability and Inspectability Work Pack.
- To read, and understand COMPANY standards associated with Maintainability, Inspectability and material handling (lifting and transfer),
- Pre review 3D models and create a report of findings including discrepancies & inconsistencies with standards, observations such as clashes, obstructions, and anomalies with regards to access and egress,
- Attend 3D model review sessions, raising your findings and ensuring they are addressed or captured within a punch list to be resolved,
- Ensure handling methods are critiqued and are in line with COMPANY standards and that the outcomes are detailed within the EPC material handling study / report,
- Discussion when required with SLS (Site Lifting Specialist) who is present at construction yard,
- Follow up on the punch list items with the project PDMS coordinator and relevant discipline engineers. Ensuring punch close out before Transfer to Operations and Maintenance.

**What you need to bring**
- Bachelor’s degree or equivalent in engineering,
- Rigging & Lifting training.
- 3-8 years site experience with a strong background in Material Handling, Rigging & Lifting,
- Previous experience within engineering or design of petrochemical, refining, Oil & Gas facilities.
- Medically fit to travel to Offshore Oil & Gas Platforms,
- H2S OPITO and T-BOSIET trainings.

**Benefits**
- ** Salary**:

- Day Rate in USD Plus Allowance
- ** Work Schedule**:

- 9 Hours / 6 Days
- ** Duration**:

- 30-JUN-2025, renewable
- ** Location**:

- Qatar

Academic Bachelor


  • Inspection Engineer

    1 month ago


    Doha, Qatar Brunel Full time

    To supervise, conduct and execute various online and offline inspection activities on Plant Static equipment and piping. - Coordinate inspection and NDE works with outside parties and analyze the findings to ensure the integrity, reliability, and availability of the plant’s static equipment/piping. **About this role** - Conduct and execute various online...

  • Inspection Engineer

    4 weeks ago


    Doha, Qatar Kintec Global Recruitment Full time

    Manage baselineinspection activities ensuring EPCIC and contractor schedules arealigned and meet project milestonesEnsure compliance of all inspection activities withspecifications/standards and local legislation.Review and validate all inspection engineeringactivities included in the contractProvide assistance to the Contractor Work Package Leaders...


  • Doha, Qatar NES Fircroft Remote Work Freelance Full time

    Position: MIEC Inspection Engineer Location: Doha Start Date : 01-APR-2024 End Date : 31-MAR-2026 Qualification and background Minimum Qualifications:Bachelor's degree or equivalent in engineering.Minimum Experience:Minimum 3-8 years' experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering...


  • Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: MIEC Inspection Engineer Location: Doha Start Date : 01-APR-2024 End Date : 31-MAR-2026 Qualification and background Minimum Qualifications:Bachelor's degree or equivalent in engineering.Minimum Experience:Minimum 3-8 years' experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering...


  • Doha, Qatar Brunel Qatar Full time

    Organize and coordinate the development and implementation of robust inspection plans and activities, providing technical expertise in equipment integrity, and collaborating with cross-functional teams to achieve project readiness, and safe and seamless start-up of Operations Expansion & Start Up projects.Manages low to medium complexity multi-disciplinary...


  • Doha, Qatar Brunel Qatar Full time

    To ensure follow-up of Maintenance Engineering activities in line with Maintenance & Inspection Engineering contractTo ensure compliance of activities with specifications/standards and local legislation,To co-ordinate all project MIEC activities in collaboration with MIE Contractor, Maintenance Department and MIEC Lead, Your Tasks HSEQ...


  • Doha, Qatar Brunel Qatar Full time

    HSEQ responsibilities:Ensure compliance with Incident Free culture, Health and Safety and Environment policy,Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications etc.),Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at CTR yard, HSEQ...


  • Doha, Qatar Brunel Full time

    To Inspect the materials to the PO requirements (Technical Specification, certification, packaging, and the physical condition) and conclude the inspection outcome; - To refer required specifications, codes, standards or other Engineering Documents, drawings, datasheets for carrying out the Inspection; - Report item wise visual, dimensional, quantities with...


  • Doha, Qatar Al-Sofi Full time

    ALSOFI GROUP PVT LTD: SENIOR RISK BASED INSPECTION ENGINEER: Engineers: Minimum 3 Years: Job Code : AST186002-25: Qatar: Free accommodation Free transportation Minimum Experience: 3 years Gulf experience.ALSOFI GROUP PVT LTD: SENIOR RISK BASED INSPECTION ENGINEER: Engineers: Minimum 3 Years: Job Code : AST186002-25: Qatar: Free accommodation Free...


  • Doha, Qatar Applus+ Full time

    Support thesite Offplots Quality Team in coordinating all aspects of the project Requestfor Inspection (RFI) Verification program and ensure the Quality Controlprogram is achieved.Coordinatesite inspection workflow from Contractor databases to assigned Companypersonnel, verifies the accuracy, and reconciles the completion status of theinspection performed...

  • Inspection Engineer

    4 weeks ago


    Doha, Qatar NES Fircroft Doha Full time

    Experience with CMIMS.Detailed knowledge of legislation/regulations relevant to inspection discipline.Familiar with company standards, MANASA and relevant codes and standards.Fluent in English (listening, writing, and speaking) and its technical vocabulary.Computer literate.Good communication and analytical skills.Ability to work in a complex and...


  • Doha, Qatar BriteConsult Full time

    6-8 years’ experience in automobile / vehicle repair / inspection with at least 3 years holding a supervisory roleProvide vehicle registration, reservation, cancellation and report printing services as per customer requirement consistent with department standardsAssist in explaining to the customers the faults marked in the inspection report if...

  • Quality Ops Tech

    1 month ago


    Doha, Qatar McDermott Full time

    **Job Overview**: Information for the section above must be pulled from the (GJF) Global Job Framework Quality Ops Tech (Vendor Inspection Coordinator) (Source Inspection Administrator) has responsibilities for the source inspection coordination and preparation of relevant documentation in the respective project and reporting to Senior Quality Ops Tech...


  • Doha, Qatar Applus+ Full time

    Support thesite Offplots Quality Team incoordinating all aspects of the project Requestfor Inspection (RFI)Verification program and ensure the Quality Controlprogram isachieved.Coordinatesite inspection workflow fromContractor databases to assigned Companypersonnel, verifies theaccuracy, and reconciles the completion status of theinspectionperformed for the...

  • Quality Ops Tech

    1 month ago


    Doha, Qatar McDermott Full time

    **Job Overview**: Quality Ops Tech (Vendor Inspection Coordinator) (Source Inspection Administrator) has responsibilities for the source inspection coordination and preparation of relevant documentation in the respective project and repotting to Senior Quality Ops Tech (Senior Vendor Inspection Coordinator), Source Inspection Manager (Project) or Project...


  • Doha, Qatar TRS Staffing Full time

    **Position**: Manager - ROV & Survey Subsea Inspection **Industry**: Oil & Gas (Offshore/Onshore), EPCIC, Subsea **Location**: Qatar **Key Roles & Responsibilities**: - Overall responsibility for all ROV and Survey activities on - and off-shore. - Overall responsibility for all operational activities associated with ROV and Survey assets, including all...

  • Inspection Supervisor

    1 month ago


    Doha, Qatar قطر للطاقة Full time

    **Company** QatarEnergy is an integrated national oil corporation that stands at theforefront of efforts for the long term sustainable development,utilization and monetization of oil and gas resources in the State ofQatar. In its efforts to become one of the best national energycompanies in the world, QatarEnergy's activities and those of itssubsidiaries...


  • Doha, Qatar قطر للطاقة Full time

    **Company** QatarEnergy is an integrated national oil corporation that stands at the forefront of efforts for the long term sustainable development,utilization and monetization of oil and gas resources in the State of Qatar. In its efforts to become one of the best national energy companies in the world, QatarEnergy's activities and those of its...


  • Doha, Qatar Energy Jobline Full time

    The site (RLIC) Request For Inspection (RFI) Coordinator provides a high level of technical support and coordination for the project Offplots Quality function. The position coordinates efficient inspection resource allocation via Request for Inspection (RFI) coordination and produces project RFI reporting metrics.This position enables the NFE Offplots...


  • Doha, Qatar Brunel Full time

    Receiving TPI Packages from Buyers for TPI assignment. Checking for completeness of the package received against standard requirements. Following up and getting missing documents where the package is incomplete; - Verifying the manufacturer details is existing in SAP-Inspection Follow System (IFS). If not existing, advise vendors / suppliers to provide...