Qc Inspector Ii
4 months ago
Reports to: QC Manager
Category: FTE
Unit / Division / Department / Section: QC
Location: Qatar
- ___
JOB PURPOSE
Responsible for ensuring that all the Pipes and Couplers are manufactured to the quality standards laid down and that every item is inspected and stamped QC OK when ready for release to the Final Warehouse
KEY ACCOUNTABILITIES
Policies & Procedures
- Comply with operational procedures and instructions when performing all job tasks and activities
In-process inspection
- Ensure only approved and QC accepted raw materials are used in the manufacturing process
- Ensure that the production process comply with the technical Know-How documents & Quality Assurance Procedures
- Conduct the refractive index check of the epoxy resin/hardener mix ratio to ensure it meets the set requirements
- Check and monitor the ambient temperature and humidity
- Witness the production processes and ensure that the relevant approved Raw Material Calculation and Machine Set ups are followed to meet the project requirements
- Inform the non-conformances immediately to the responsible Machine Captains and other employees in the Production and QC departments so corrective actions can be taken
Online / Offline Inspection of Pipes and Couplers
- Inspect the Pipes and Couplers as per the requirements of product drawings following the inspection and testing program
- Select QC samples during the production process as per the inspection program and/or project ITPs as applicable
Trading materials inspection
- Inspect the products purchased from the other manufacturing units or sub supplier and ensure that those products meet the project specification requirements and release them for delivery
- Inspect the locking strips, different types of gaskets such as Kroll and Ziller, O-rings, flat gaskets in order to ensure the quality meets the minimum specified requirements
Non-destructive testing
- Conduct the non-destructive tests as per the ITP requirement
- Witness the routine hydro tests for the Pipes and Couplers
Destructive Testing
- Conduct the destructive tests in accordance to the ITP requirements and project commitments agreed with the Client/consultant
- Witness and monitor the short term and medium term survival tests periodically and ensure the tests are not affected with any climatic effects and successfully completed as per the project requirements
Preparation of reports, TPI inspection and release
- Prepare the daily QC internal reports as well as project specific documentation (Manufacturing Record Book - MRB) to be submitted to the Client
- Carry out the final inspection and release together with the Customer TPIs and Client TPIs for all the products comes under the major projects based on the project specific requirements. Also perform additional tests as per the ITP for the witness point of Customer/Client
Stock counting
- Participate and lead a small team of employees during the Half
- yearly and Yearly stock counts to ensure that the physical inventory matches the ERP system inventory
- Carry out monthly stock counting for the major raw materials in the stores warehouse and provide the actual data to the QC Engineer for monthly RM stock count report
Mould & Socket Sleeve inspection
- Carry out steel mould and socket sleeve inspection either at factory of at supplier’s premises as per the relevant engineering drawings to ensure that those moulds are manufactured as per the given approved drawings
HSE
- Comply with relevant safety, quality and environmental control procedures and instructions
- Use personal protective equipment and safety gear when performing assigned tasks
- Keep operational areas clean and well organized to prevent incidents and accidents
- Report unsafe acts, incidents or safety violations
- Develop a safety culture by ensuring all staff comply with HSE policies and procedures
- Participate in QHSE audits, incident reporting and review of QHSE performances as require
SPAN OF Communication
- Internal: Production, Projects and Delivery Departments
- External: Third Party Inspectors
- Job relevant information (BOUNDARIES & DECISION-MAKING AUTHORITY)
- The jobholder has the authority to reject any product that does not meet QC set standards, with the approval of direct manager
**Skills**:
Required Qualifications:
- Technical School Certificate / On Job Training
Preferred Experience:
- At least 2 years of pipe manufacturing experience
- Engineering Degree / Diploma (Civil or Mechanical)
Job-Specific Skills:
- QC inspection and testing of Raw Material and finished products.
- Reading and interpretation of engineering drawings
- Ability to prepare reports
- Ability to use measuring and testing equipment
COMPETENCIES
- Self-motivated
- Teamwork
- Accurate and attentive to details
This job has been sourced from an external job board.
-
QA/qc Welding Inspector
1 month ago
Doha, Qatar China Eleventh Chemicals Construction WLL Full timeDirect, Supervise and Participate in inspection activities to ensure product quality - Project Quality Plan/Procedures necessary to achieve product quality - Initiate evaluation for non-conforming items - Develop Project Quality Plans, inspection, and test plans in consultation with Project Quality Manager - Liaise with QC/NDT/Certification/Welding Team and...
-
Qc Welding/piping Inspector
6 months ago
Doha, Qatar Swan Global WLL Full timeUrgently Hiring - QC welding/piping inspector Job Location: - Raslaffan, Qatar Contract Duration: - 12 Months **Salary**: - To be discussed Work Hours: - 10Hr/6 Days **Qualifications**: - Code knowledge for ASME B31.3, ASME B31.8, ASME Sec. IX, ASME Sec.V **Experience required**: minimum 10 years oil & gas experience. **Required certification**:...
-
QA/qc Welding Inspector Cswip 3.2
3 months ago
Doha, Qatar Atlas Dias Full timeWe are Hiring QA/QC Welding Inspector Qualifications: Minimum 5-7 years of experience in quality assurance for the repair of plant equipment/items. Certified Welding Inspector 3.2.2, with a strong understanding of quality assurance and control. Preferred: Level-II certification in RT, UT, MT, PT, VT. Engineering background or technical education from a...
-
QA/qc Welding Inspector
2 months ago
Doha, Qatar ELECO Full timeDirect, Supervise and Participate in inspection activities to ensure product quality - Project Quality Plan/Procedures necessary to achieve product quality - Initiate evaluation for non-conforming items - Develop Project Quality Plans, inspection, and test plans in consultation with Project Quality Manager - Liaise with QC/NDT/Certification/Welding Team and...
-
Qc Inspector
6 months ago
Doha, Qatar Ruby Information Technology Solutions Full timeQC INSPECTOR-CIVIL Any nationality. Should have experience as QC inspector. Qatar/GCC experience is mandatory. Minimum 7 years' experience required. Must have oil and gas experience. Must have UPDA. Send your CVs to: **Education**: - Bachelor's (required) **Experience**: - oil and gas: 7 years (required) **Language**: - english (required) Ability to...
-
Qc Inspector Ii
4 months ago
Doha, Qatar Future Pipe Industries Full timeReports to: QC Manager Category: FTE Unit / Division / Department / Section: QC Location: Qatar - ___ JOB PURPOSE Responsible for ensuring that all the Pipes and Couplers are manufactured to the quality standards laid down and that every item is inspected and stamped QC OK when ready for release to the Final Warehouse KEY ACCOUNTABILITIES Policies &...
-
Junior Qc Inspector
4 days ago
Doha, Qatar DIME International Mechanical Engineering Full time1. Junior QC Inspector - Fabrication Key Responsibilities: Conduct dimensional inspections of fabricated components. Verify material preparation, fit-up, and alignment. Ensure compliance with client specifications and shop drawings. Record inspection results and address non-conformance issues. 2. Junior QC Inspector - Welding Key...
-
Coating/qc Inspector
4 months ago
Doha, Qatar AL Jameh Group General Trading and Contracting Full time**COATING/ QC INSPECTOR** **Eligibility Criteria**: Minimum 5 years of verified experience in oil and gas industry in similar capacity and shall possess NACE-II, B GAS level 2, FROSIO, I Corrlevel-2 or equivalent. **QUALIFICATION**:Diploma/ Degree/ BSc - Mechanical Engineering **LOCATION**: QATAR **JOINING**: 15 SEPT 2024 **SALARY**:5000 -5500 QAR...
-
Qc Welding Inspector
3 months ago
Doha, Qatar Drawlines Consult WLL Full time**DRAWLINES ENGINEERING CONSULT** is looking for **QC Welding Inspector** in Doha, Qatar **Project Duration **:6 Months Extendable **Project Site Location**:Mesaieed **Qualification**: - Welding Inspectors shall have at least five (5) years of current experience as welding Inspectors in a fabrication/project environment and have valid **CSWIP 3.1...
-
Qc Inspector
6 months ago
Doha, Qatar Facilities Management and Maintenance (FMM) Full time**Immediate Hiring for a Prestigious Project** **QC Inspector -Electrical** **Requirements**: - University Degree/Diploma in Engineering (Electrical) - Minimum of 2/3 years of experience as QC inspector/Engineer. - Internal auditor/Lead auditor training, or any other Quality discipline training will be an added advantage. **Job Types**: Full-time,...
-
Qc Inspector
1 month ago
Doha, Qatar Lanco Engineering Full time**Urgent Hiring!!** **QC Inspector** **8 Years of Experience** **Should have Mechanical background** **Location**: **New Industrial Area** **Duration: 1 month** **Immediate joining is required** **Experience and education required**: - Diploma/Engineering Degree in Mechanical required. - NDT (RT & UT) Certification. - 6-8 years of previous experience...
-
QA/qc Inspector
6 months ago
Doha, Qatar ( Outsourcing & Recruiter ) Full timeOur Company is looking for: QA/QC Inspector Qualifications: - 7 Years of Experience - UPDA - Consultancy Experience - Experience working with PWA (preferred) **Job Type**: Temporary Ability to commute/relocate: - Doha: Reliably commute or planning to relocate before starting work (required) **Education**: - Bachelor's (preferred) **Experience**: -...
-
Qc Painting/coating Inspector
3 months ago
Doha, Qatar Project Support Service co Full timeUrgent Hiring!!! We are looking for a QC painting and coating inspector. please see the requirements below; - **Requirements**:_ - should have Knowledge of NACE, BS, SSPC, TWI, and codes relevant to the scope of work - Should have CIP level 2 or above CSWIP grade 2 - Experience: Minimum 10-15 years as inspector or lead inspector **Experience**: - QC...
-
Qc Inspector
6 months ago
Doha, Qatar Sanmar Trading Contracting WLL Full timeShould have previous experience as QC Inspector in oil & gas projects preferably with previous ARAMCO approval. Should have Bachelor or Diploma in Engineering **This requirement is for KSA Projects** **Job Type**: Permanent Pay: From QAR7,000.00 per month
-
Qc Inspector
7 months ago
Doha, Qatar Facilities Management and Maintenance (FMM) Full time**Requirements**: - University Degree/Diploma in Engineering (Electrical) - Minimum of 2/3 years of experience as QC inspector/Engineer. - Internal auditor/Lead auditor training, or any other Quality discipline training will be an added advantage. - NOC and valid QID is required - WhatsApp: +974 77638997_ **Job Types**: Permanent, Contract Contract length:...
-
Qc Inspector
7 months ago
Doha, Qatar Swan Global WLL Full timeWe are Swan Global looking for QC Inspector - Pipeline for Doha Location. Please find job details below: Experience: 10 Yrs Project Duration: 1 Year Location: Ras Laffan Education: Engineering Degree **Experience**: - NACE/AMPP certified Level 3 QC Inspector, - preferably approved by Qatar Gas. - It will be an inspection of the external field joint...
-
Qc Welding
3 months ago
Doha, Qatar GLOBAL STRATEGIC SERVICES Full time**Welding inspector -** - Qualification: Mechanical Degree or equant - Technical qualification: CSWIP 3.1 certification and ASNT level II in RT,PT,MT and UT - Scope : Piping, Tanks and structure in Oil and Gas projects - Experience :Min 5 years after CSWIP 3.1 certification. **Painting Inspector** - Qualification: Mechanical Degree or equant - Technical...
-
Qc Inspector Coating-outsourcing
6 months ago
Doha, Qatar Lanco Engineering Full time**QC Inspector Coating** - Minimum of 3-5 years of experience as a QC Inspector coating - Experience within the Oil & Gas or Construction sectors. - Education in materials science, corrosion engineering, or a related field - Additional technical certifications in painting and coating inspection are preferred. - Proven experience in inspecting and testing...
-
Civil QA/qc Inspector
6 months ago
Doha, Qatar Lanco Engineering & Contracting W.L.L Full time**Civil QA/QC Inspector** - Minimum 4 years of experience - Infra Experience is mandatory - Duration : 2 Months - Immediate joiners only **Job Type**: Contract **Experience**: - QA/QC Inspector: 3 years (required) - Infrastructure/Road: 3 years (required) Ability to Commute: - Doha (required)
-
QA Qc Welding Inspector
6 months ago
Doha, Qatar ( Outsourcing & Recruiter ) Full timeWe are looking for: **QA QC WELDING INSPECTOR** Qualification: - QG North SD experience ( Qatar Gas North experience) - Working Hours: 12 Hrs - Duration: 2 -3 Months cswip 3.1 **Experience**: - qatar gas: 5 years (preferred) - QA QC WELDING INSPECTOR: 5 years (preferred)