Tig and Arc Welder 6G CS

16. Tig & Arc Welder (6G-CS & SS) – 04 Nos 
Experience – Minimum of 5 years’ experience
Language  Knowledge- Hindi / English
Salary - CS+ SS welders QAR 1500 to 1700 + OT / Month for 8 Hrs Working / Night Shift
Work As required .If have CS+ SS + Copper Nickel + Incoloy + Duplex welders QAR 1800
to 2200/ Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar

Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Perform 6G pipe welding for Carbon Steel (CS), Stainless Steel (SS), and Low
Temperature Carbon Steel (LTCS) piping systems.
 Execute welding using TIG (GTAW) & ARC (SMAW) processes as per approved
WPS/PQR.
 Carry out welding for process piping, utility piping, and critical LTCS lines requiring strict
temperature control and procedure compliance
 Prepare joints by ensuring proper fit-up, alignment, cleaning, and tack welding support
before final welding execution.
 Follow applicable welding standards such as ASME Section IX, AWS D1.1, and project-
specific specifications.
 Work independently and handle multitask site requirements while maintaining high-quality
welds and strict safety compliance.
 Be flexible to work on different projects, locations (onshore/offshore), and support multiple
tasks as required.
17. Gas Cutter – 07 Nos 
Experience – Minimum of 5 years’ experience
Language  Knowledge- Hindi / English
Salary - QAR 1100 to 1200 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Perform gas cutting operations (oxy-acetylene and plasma cutting) for steel plates, pipes,
and structural materials as per approved drawings, specifications, and site requirements.
 Carry out cutting, shaping, and preparation of tank components including shell plates,
bottom plates, roof plates, nozzles, and structural supports for fabrication and repair works..
 Assist in repair, removal, and reinstallation activities of tank structures, ensuring proper fit-
up, alignment, and preparation for welding or bolting works.
 Support fabrication and installation activities including tack welding preparation, manual
material handling, and coordination with fitters and welders.
 Work independently and multitask at site conditions while ensuring strict adherence to
safety procedures, quality standards, and project specifications.
 Be flexible to work on different projects, locations (onshore/offshore), and support multiple
tasks as required.

18. Grinder – 16 Nos 
Experience – Minimum of 5 years’ experience
Language  Knowledge- Hindi / English
Salary - QAR 1100 to 1200 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Perform grinding in Tank, surface preparation, beveling, and finishing works on steel plates,
pipes, and structural components using grinders and other metal preparation tools as per
project requirements.
 Carry out preparation works for tank rehabilitation including cleaning, edge preparation, and
surface finishing of shell plates, bottom plates, roof plates, nozzles, and structural
members.
 Support tank repair and reinstallation activities including fit-up, alignment, tack welding
preparation, and coordination with fitters and welders.
 Ensure proper use of tools and equipment such as grinders, beveling machines, and
cutting tools while maintaining attention to detail and quality standards.
 Work independently and handle multitask site requirements, including manual material
handling and hydrotesting support activities, while strictly following safety procedures and
project specifications.
 Be flexible to work on different projects, locations (onshore/offshore), and support multiple
tasks as required.

19. Fire Watcher & Hole Watcher – 35 Nos 
Experience – Minimum of 5 years’ experience
Educational Qualification – Minimum HSC or Diploma in Mechanical
Language  Knowledge- Hindi / English
Salary - QAR 1000 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
Fire Watcher Responsibilities:
 Monitor all hot work activities such as welding, cutting, and grinding to prevent fire incidents
and ensure safe execution of work.
 Ensure fire protection equipment such as fire extinguishers, fire hoses, and fire blankets
are properly placed, accessible, and in good working condition at the work area.

 Maintain continuous vigilance during hot work operations and respond immediately to any
fire or spark-related hazards using appropriate firefighting equipment.
 Stop work immediately if unsafe conditions are observed and report hazards or violations to
the supervisor or HSE team without delay.
 Ensure strict compliance with site safety procedures, PTW requirements, and QatarEnergy
or project-specific fire safety regulations.
 Remain alert and ready to perform multitask site duties as assigned while maintaining full
focus on fire safety responsibilities.
Hole Watcher Responsibilities:
 Monitor all confined space entry activities and ensure strict compliance with confined space
entry permits and approved safety procedures.
 Maintain continuous communication with personnel working inside confined spaces and
ensure their safety throughout the operation.
 Ensure proper ventilation, gas testing, lighting, and safety equipment are in place before
and during confined space entry activities.
 Track and record entry and exit of all personnel entering confined spaces to ensure
accurate accountability at all times.
 Initiate emergency response procedures immediately in case of any unsafe condition,
alarm, or distress inside the confined space.
 Ensure compliance with PTW systems, HSE regulations, and remain prepared to perform
multitask site duties as assigned.

20. Assistant Fitter – 52 Nos 
Experience – Minimum of 5 years’ experience
Language  Knowledge- Hindi / English
Salary - QAR 1000 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Assist in tank rehabilitation works including preparation, fitting, alignment, installation,
removal, and reinstallation of tank plates, nozzles, piping components, and structural steel
members.
 Support fabrication and installation activities by handling materials, assisting in fit-up,
positioning components, and preparing work areas as directed by supervisors.
 Assist in cutting, grinding, beveling, and surface preparation activities using hand tools, gas
cutting equipment, and other approved tools and equipment.
 Read and follow basic engineering drawings, sketches, work instructions, and safety
requirements to support the execution of assigned tasks with minimum supervision.
 Perform Tank internal cleaning, Support Painting. Civil & Scaffolding team
 Assist in hydrotesting activities, manual material handling, lifting operations, and
preparation of components for welding, including tack welding support where required.

 Work independently or as part of a team, perform multitask site activities as assigned, and
ensure compliance with project safety procedures, quality requirements, and housekeeping
standards at all times.
 Be flexible to work on different projects, locations (onshore/offshore), and support multiple
tasks as required.

21. Electrician – 04 Nos
Experience – Minimum of 5 years’ experience
Education Qualification – HSE/Diploma/ITI
Language  Knowledge- Hindi / English
Salary - QAR 1200 to 1400 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Carry out installation, maintenance, troubleshooting, and repair of electrical systems and
equipment, including lighting systems, power distribution boards, generators, welding
machines, grinding machines, and temporary power arrangements required for tank
rehabilitation activities.
 Install, terminate, test, and maintain electrical cables, junction boxes, switches, lighting
fixtures, motors, and other associated electrical equipment at site.
 Perform inspection, testing, and fault diagnosis of electrical systems using appropriate
testing instruments, ensuring all equipment is safe, reliable, and fully operational.
 Ensure all electrical works are executed in compliance with Permit to Work (PTW) systems,
QatarEnergy safety procedures, applicable electrical standards, and project HSE
regulations.
 Support shutdown, maintenance, and rehabilitation activities, working independently or as
part of a team while maintaining high standards of safety, quality, and productivity.
 Coordinate with supervisors and other disciplines to ensure smooth execution of site
activities.
 Maintain proper housekeeping and ensure safe handling of tools, equipment, and materials
at all times.
 Proven experience in the Oil & Gas industry (mandatory).
 Gulf experience is required.
 Strong knowledge of industrial electrical systems and site practices

22. Rigger + Flagman – 21 Nos
Experience – Minimum of 5 years’ experience
Language  Knowledge- Hindi / English
Salary - QAR 1100 to 1200 +OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar

Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Perform rigging, lifting, and material handling activities for tank rehabilitation works,
including movement of tank plates, shell sections, roof components, nozzles, piping,
structural steel, and other heavy materials.
 Plan and execute rigging operations by assessing load weights, selecting appropriate lifting
gear, and ensuring safe lifting practices in accordance with approved lifting procedures.
 Inspect and use lifting equipment such as slings, shackles, wire ropes, chain blocks,
spreader bars, and other rigging accessories, ensuring all equipment is certified and fit for
use.
 Direct and guide crane operators during lifting operations using approved hand signals,
flagging methods, and radio communication to ensure safe and efficient load movement.
 Read and interpret lifting plans, load charts, rigging diagrams, and work instructions to
ensure proper rigging arrangements and safe execution of lifting activities.
 Establish and maintain safe lifting zones, monitor load stability during lifting operations, and
ensure personnel remain clear of suspended loads and hazardous areas.
 Report damaged, defective, or uncertified lifting equipment to supervisors and ensure such
equipment is removed from service until repaired or replaced.
 Ensure compliance with Permit to Work (PTW), lifting procedures, QatarEnergy safety
requirements, and site HSE regulations while supporting multitask site activities as
required.
 Be flexible to work on different projects, locations (onshore/offshore), and support multiple
tasks as required.

23. Light / Medium Driver – 05 Nos
Experience – Minimum of 5 years’ experience
Language  Knowledge- Hindi / English
Salary - QAR 1400 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Operate light and heavy vehicles safely for transportation of personnel, materials,
equipment, and tools within Oil & Gas plant and project sites as per assigned duties.
 Must hold a valid Qatar driving license for Light / Medium vehicles and ensure compliance
with all traffic laws and company driving regulations.
 Ensure safe driving practices in compliance with Qatar traffic rules, company transport
procedures, and site-specific HSE regulations at all times.

24. Instrument Technician – 03 Nos
Experience – Minimum of 5 years’ experience
Language  Knowledge- Hindi / English
Salary - QAR 1400 to 1600 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Install, calibrate, test, and maintain field instruments associated with cryogenic tanks,
including pressure transmitters, switches, pneumatic controllers, temperature sensors, level
gauges, and control valves.
 Carry out calibration of instruments using standard calibration equipment and ensure all
instruments are within required accuracy and tolerances.
 Ensure proper installation and maintenance of level measurement systems used in
cryogenic storage tanks such as radar gauges, differential pressure transmitters, and float
systems.
 Perform loop checking, function testing, and commissioning support during plant
shutdowns, startups, and maintenance activities.
 Work closely with mechanical, electrical, and process teams to ensure smooth integration
of instrumentation systems in tank rehabilitation and operational activities.
 Ensure compliance with Permit to Work (PTW) systems, QatarEnergy safety procedures,
and instrumentation standards during all site activities.
 Maintain accurate documentation including calibration records, maintenance reports, and
test certificates

25. General Helper – 30 Nos
Experience – Minimum of 5 years’ experience
Language  Knowledge- Hindi / English
Salary - QAR 1000 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Assist skilled workers such as fitters, welders, fabricators, and technicians in tank
rehabilitation activities by following instructions and supporting site execution work.
 Carry out basic site tasks including surface cleaning, grinding, deburring, material handling,
and preparation of work areas for welding, fitting, or painting activities.
 Operate simple hand tools such as grinders, hammers, wrenches, and other basic
equipment safely under supervision of supervisors or skilled personnel.

 Support installation and maintenance activities including movement of materials, assisting
in alignment, and preparation of components for fabrication and repair works.
 Work safely in challenging site conditions including confined spaces, working at heights,
and other industrial environments as required by project activities.
 Demonstrate teamwork, discipline, and willingness to multitask, ensuring compliance with
site safety procedures, instructions, and project requirements at all times.
 Perform Tank internal cleaning, Support Painting. Civil & Scaffolding team.

26. Store Assistant – 02 Nos
Experience – Minimum of 5 years’ experience
Language  Knowledge- Hindi / English
Salary - QAR 1200 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Receive, inspect, and verify incoming materials, tools, and equipment against delivery
notes, purchase orders, and project specifications.
 Ensure proper storage, labeling, and arrangement of materials in the store yard or
warehouse in compliance with company procedures and safety standards.
 Issue materials and tools to site personnel based on approved requisitions and maintain
accurate records of all inward and outward movements.
 Maintain inventory records, stock registers, and material tracking systems to ensure
accurate stock control and availability of materials.
 Assist in periodic stock verification, audits, and reconciliation of materials to prevent
shortages, losses, or discrepancies.
 Coordinate with site engineers, procurement teams, and suppliers for material delivery,
replacement, and return of unused items.
 Ensure proper handling and preservation of materials such as pipes, fittings, valves,
electrical items, and consumables to avoid damage or deterioration.
 Maintain housekeeping, safety compliance, and organization of the store area in
accordance with HSE regulations and company procedures.

27. Site Admin – 02 Nos
Experience – Minimum of 5 years’ experience
Language  Knowledge- Hindi / English
Salary - QAR 1200 to1400+ OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.

Job Responsibility: 
 Site administrative work
 Coordination for visa , gate passes , logistic etc
 Monthly Timesheets
 Leave schedule and Camp coordination.

28. Mechanic – 01 No
Experience – Minimum of 5 years’ experience
Language  Knowledge- Hindi / English
Salary - QAR 1200 to 1400 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Perform maintenance, servicing, inspection, and repair of light and heavy vehicles including
trucks, Forlift,buses, pickups, and site vehicles used in oil & gas projects.
 Perform maintenance, servicing, inspection, and repair of Diesel Generator, Compressor,
Dewatering Pump & Hydraulic Jacks
 Diagnose mechanical, electrical, and hydraulic faults in vehicles and carry out effective
troubleshooting and corrective repairs to ensure safe and reliable operation.
 Carry out preventive maintenance activities such as engine servicing, oil changes, brake
repairs, clutch works, suspension, steering, and transmission systems.
 Inspect vehicles regularly to ensure roadworthiness, identify defects, and ensure
compliance with safety and company transport standards.
 Maintain service records, repair logs, and maintenance reports accurately for all assigned
vehicles as per workshop and site requirements.
29. Civil Mason – 02 Nos
Experience – Minimum of 5 years’ experience
Language  Knowledge- Hindi / English
Salary - QAR 1100 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Carry out civil construction and repair works including concrete breaking, plastering, block
work, grouting, and finishing activities related to tank rehabilitation projects.

 Prepare surfaces and execute repair works such as crack filling, patch repairs, and
concrete restoration for tank foundations, bund walls, and structural areas.
 Mix and apply construction materials such as cement, mortar, grout, and other compounds
in correct proportions as per site requirements.
 Assist in formwork, scaffolding, and reinforcement-related activities as required for civil
maintenance and rehabilitation works.
30. Tank Jacking Operator – 01 No 
Educational Qualification- SSC/HSC/ITI
Experience – Minimum of 10 years’ experience
Age – Minimum 25- 40 Years
Language  Knowledge- Hindi / English
Salary - QAR 1500 to 1700 + OT / Month for 8 Hrs. Working / Night Shift Work As required
Work Location – Onshore / Offshore Anywhere in Qatar
Contract Type - Long Term / permanent based on performance
Free Food, accommodation and transport.
Leave - Yearly leave to home country.
Job Responsibility: 
 Operate hydraulic tank jacking systems for lifting, lowering, and positioning storage tanks
safely during construction, rehabilitation, and maintenance activities.
 Assemble, install, inspect, and dismantle tank jacking equipment, including hydraulic jacks,
power packs, lifting brackets, hoses, and supporting accessories.
 Monitor hydraulic pressure, lifting loads, tank level, and synchronization of all jacking points
to ensure uniform lifting and prevent structural distortion.
 Carry out tank lifting operations strictly in accordance with approved lifting procedures,
engineering drawings, method statements, and project specifications.
 Perform routine inspection, maintenance, and functional checks of hydraulic jacks, pumps,
hoses, gauges, and related lifting equipment before and after use.
 Coordinate with supervisors, engineers, riggers, scaffolders, and fabrication teams to
ensure safe and efficient execution of tank jacking activities.
 Ensure tank alignment, plumbness, elevation, and dimensional tolerances are maintained
throughout the lifting and lowering operations.
 Identify equipment defects, hydraulic leaks, uneven lifting conditions, or abnormal operating
conditions and immediately report them to the supervisor.
 Maintain records of jacking operations, lifting sequences, equipment inspections, and
maintenance activities as required.
 Comply with all safety procedures, Permit to Work (PTW) requirements, confined space
regulations, work-at-height procedures, and lifting safety standards.
 Assist in tank shell erection, dismantling, rehabilitation, and associated mechanical
activities whenever required.
 Work independently with minimum supervision while maintaining productivity, quality, and
strict adherence to HSE requirements.
 Be flexible to work on different projects, locations (onshore/offshore), day or night shifts,
and support multiple mechanical activities as required.