Senior MIEC Instrumentation Engineer

2 weeks ago


Doha, Baladīyat ad Dawḩah, Qatar Tanqeeb Full time

JOB PURPOSE & KEY ACCOUNTABILITIES:

The purpose of the Job is to guarantee that the Instrumentation part of all Maintenance & Inspection Engineering (MIE) Contractor deliverables are aligned with FOPS Maintenance team requirements. As such, the job holder is accountable:

  1. Responsible for the review of all Maintenance and Spare Parts deliverables related to Instrumentation issued by the MIE Projects Contractors.
  2. Ensure the compliance of Instrumentation activities with Client's specifications/standards.
  3. In charge of the training and monitoring of Instrumentation engineers.
  4. Guarantee the quality of the technical description for all Instrumentation spare parts, commissioning/start up, capital and operational ensuring purchase requisition specification and relevant certifications are correct.
  5. Provide assistance to the MIE contractor Work Package leaders with regards to Electrical activities issues.
HSEQ responsibilities:

To ensure compliance with client's Incident Free culture, Health and Safety and Environment policy.

Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications).

Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at CTR yard, HSEQ meetings ensuring risks are identified, actions assigned and managed within Project team and Contractors.

Monitor work activities, especially areas where unsafe acts could occur and ensure that risks have been properly identified and assessed prior to work execution (Job Safety Analysis).

Ensure that potential failures, weaknesses and hazards are immediately reported.

MIEC General Responsibilities:

Responsible for the review of all Maintenance and Spare Parts deliverables related to Instrumentation issued by the MIE Projects Contractors.

In charge of the training and monitoring of Instrumentation engineers.

Attend weekly and monthly meetings with MIE Contractors.

Identify areas of concern, challenge, and identify / implement improvement measures.

Ensure all outstanding Instrumentation related actions were managed and closed out within time.

Provide assistance to the MIE Contractor Instrumentation leaders to ensure compliance with project specifications.

Participate in Maintenance and Spare Parts MIEC workshops with Company Stakeholders to ensure alignment.

MIEC Technical Responsibilities:

Review documentation both EPCIC and projects and provide feedback in a timely manner.

Coordinate and validate the quality and compliance of Instrumentation documents required for the completion of Maintenance deliverables in the EDMS.

Participate in 3D model reviews, ensure that maintainability aspects, maintenance access and handling requirements are properly addressed during Detailed Engineering.

Contribute to the development of new or updating of Instrumentation standards.

Participate in criticality reviews, RBM studies or equivalent to ensure Instrumentation related Maintenance requirements are properly addressed.

Review and validate the Instrumentation Maintenance Work Instructions.

Guarantee the quality of the technical description for all Instrumentation spare parts, commissioning/start up, capital and operational ensuring purchase requisition specification and relevant certification are correct.

Provide technical clarification for the procurement of Instrumentation spare parts as required.

Participate in the review of the Maintenance dossiers prepared by the MIE Contractors.

Skills QUALIFICATIONS, EXPERIENCE, & SKILLS:

Minimum Qualifications:

Bachelor's degree or equivalent in engineering.

Minimum Experience:

8 to 10 years' experience in the petrochemical, refining, oil & gas exploration & production or similar industry in Instrumentation Engineering role.

Previous experience in the supervision of Maintenance Engineering activities within a project team and/or experience in the use of the Risk Based Maintenance (RBM) or equivalent would be beneficial.


#J-18808-Ljbffr
  • MIEC Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar Airswift Full time

    Job Specification & Key Accountabilities(Duties include but not limited to):Ensure proper preparation and execution of the MIE Project and handover to the FOPS department.Follow up on Maintenance Engineering activities as per the Maintenance & Inspection Engineering Contract (MIEC).Ensure MIEC activities comply with CLIENT specifications, standards, and...


  • Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: MIEC Inspection Engineer Location: Doha Start Date : 01-APR-2024 End Date : 31-MAR-2026 Qualification and background Minimum Qualifications:Bachelor's degree or equivalent in engineering.Minimum Experience:Minimum 3-8 years' experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering...


  • Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: MIEC Inspection Engineer Location: Doha Start Date : 01-APR-2024 End Date : 31-MAR-2026 Qualification and background Minimum Qualifications:Bachelor's degree or equivalent in engineering.Minimum Experience:Minimum 3-8 years' experience in the petrochemical, refining, Oil & Gas exploration, or similar industry in Inspection Engineering...

  • Rp Miec Engineer

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for RP MIEC Engineer for one of our clients with the following details:Location : Doha, QatarStart date: 01-JUN-2024Demob date: 31-MAY-2026Work Status : Resident, SingleQualifications, Experience, & Skills:Minimum Qualifications:Bachelor's degree or equivalent in engineering Minimum 38...


  • Doha, Baladīyat ad Dawḩah, Qatar NES FIRCROFT Full time

    BH-260996Posted: 16/02/2024 Competitive Qatar Doha Contract Oil & Gas PetrochemicalPosition: MIEC Inspection EngineerLocation: DohaStart Date : 01-APR-2024End Date : 31-MAR-2026Qualification and backgroundMinimum Qualifications: Bachelor's degree or equivalent in engineering.Minimum Experience: Minimum 38 years' experience in the petrochemical, refining, Oil...

  • Miec Maintenance Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for a MIEC Maintenance Lead for one of our clients with the following details:Location: Doha, QatarStart Date: 01-JUN-2024End Date: 31-MAY-2026Doha Logistics allowance: SINGLE statusQualification and Experience Required:Minimum Qualifications: Bachelor's degree or equivalent in...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for RP Senior MIEC Electrical Engineer for one of our clients with the following details:Location : Doha, QatarStart date: 01-JUN-2024Demob date: 31-MAY-2026Work Status : Resident, SingleMinimum Qualifications: Bachelor's degree or equivalent in engineering. Minimum Experience: 8 to 10...

  • Miec Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaPosition: MIEC LeadLocation:Doha QatarDuration:2 YearsStatus:Resident SingleTaskHSEQ responsibilities: Ensure compliance with THE COMPANY Incident Free culture, Health and Safety and Environment policy, Support and enforce the project HSEQ management system (charters, objectives, directives, plans,...

  • MIEC Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar MphExperts Full time

    Position: MIEC LeadLocation: Doha QatarDuration: 2 YearsStatus: Resident SingleTaskHSEQ responsibilities:Ensure compliance with THE COMPANY Incident Free culture, Health and Safety and Environment policy,Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures and specifications etc.),Promote HSEQ awareness...


  • Doha, Baladīyat ad Dawḩah, Qatar Brunel Full time

    The purpose of the Job is to guarantee that the Mechanical part of all Maintenance & Inspection Engineering (MIE) Contractor deliverables are aligned with FOPS Maintenance team requirements.About this role During Basic Engineering Phases: Ensure that Maintainability aspects, handling requirements and Maintenance access are properly addressed. Participate to...

  • CPP MIEC Lead

    2 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar Oil and Gas Job Search Ltd Full time

    The purpose of the Job is to guarantee the proper preparation and execution of one MIE Project. As such, the job holder is accountable: To ensure the proper preparation and execution of the Maintenance and Inspection Engineering (MIE) Project up to handover of MIEC deliverables to department. To ensure follow-up of Maintenance Engineering activities in...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for Ruya Batch 1 MIEC Lead for one of our clients with the following details:Start date: AUG-2024Demob date: JUL-2026Location: Doha. Qatar ( with possible missions to MIEC contractor offices and possible at EPCC yard location. Offshore if necessary )Work status : Resident....


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaLooking for to work in Senior Instrument Engineer to work in Doha, Qatar.**Start Date: Oct-2023End Date:31-Mar-2025Contract duration:2 yearsLocation:Doha**Qualifications and experience required: Bachelor (B.E./B. Tech) of Instrumentation / Electronics / Telecom / Electrical & Instrumentation 10 Years'...


  • Doha, Baladīyat ad Dawḩah, Qatar Energy Jobline Full time

    We are looking for Ruya Batch 1 MIEC Lead for one of our clients with the following details:Start date: AUG-2024Demob date: JUL-2026Location: Doha. Qatar ( with possible missions to MIEC contractor offices and possible at EPCC yard location. Offshore if necessary )Work status : Resident. SingleQualifications & Experience Required:Bachelor's degree or...


  • Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: WHP Senior MIEC Mechanical Engineer Start date: 01-JUN-2024 Demob date: 31-MAY-2026 Location: Doha Qualification and backgroundBachelor's degree or equivalent in engineering8 to 10 years' experience in the petrochemical, refining, oil & gas exploration & production or similar industry in Mechanical Engineering role.Previous experience in the...


  • Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: WHP Senior MIEC Mechanical Engineer Start date: 01-JUN-2024 Demob date: 31-MAY-2026 Location: Doha Qualification and backgroundBachelor's degree or equivalent in engineering8 to 10 years' experience in the petrochemical, refining, oil & gas exploration & production or similar industry in Mechanical Engineering role.Previous experience in the...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Consulting Services Full time

    We are looking for Senior Instrumentation Engineer for one of our clients with the following details:Start date: 01-JUL-2024Demob date: 30-JUN-2026Location: Doha/KoreaDoha Logistics allowance: SINGLE statusQualifications & Experience Required:Engineering degree in instrumentation and control engineering.Experience: minimum 12 years' experience as...


  • Doha, Baladīyat ad Dawḩah, Qatar MPH Global Services Full time

    Industry: Oil & GasCity/Country: Doha, QatarLocation: DohaWe are looking for Senior Instrumentation Engineer for one of our clients with the following details:Start date: 01-JUL-2024Demob date: 30-JUN-2026Location: Doha/KoreaDoha Logistics allowance: SINGLE statusQualifications & Experience Required: Engineering degree in instrumentation and control...

  • MIEC Spare Parts Lead

    4 weeks ago


    Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: Spare Parts Lead Start date: 01-JUN-2024 Demob date: 31-MAY-2026 Location: Doha Qualification and backgroundBachelor's degree or equivalent in engineeringSenior Maintenance Engineer with at least 10 years' experience with Maintenance hand-on experience and previous experience gained in Maintenance operations management position,Experience with...

  • MIEC Spare Parts Lead

    1 month ago


    Doha, Baladīyat ad Dawḩah, Qatar NES Fircroft Full time

    Position: Spare Parts Lead Start date: 01-JUN-2024 Demob date: 31-MAY-2026 Location: Doha Qualification and backgroundBachelor's degree or equivalent in engineeringSenior Maintenance Engineer with at least 10 years' experience with Maintenance hand-on experience and previous experience gained in Maintenance operations management position,Experience with...